Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2.    Baser reacted to a post in a topic: British Forces weapons
  3. The_Lord_Poncho
    A specna stainless steel inner barrel (apparently the same as fitted to their 'prime' series). Absolutely shocking - the crowning is so wildly uneven, all shots through it consistently veer wildly off to one side. I'm considering chopping it, and re-crowning - even a DIY job can't be as bad as the current factory finish. Avoid!
  4. Shae
    Shae joined the community
  5. Craigb

    Tokyo Marui MP7

    Craigb posted an advert in Gas Rifles

    Time Left: 6 days and 23 hours

    • FOR SALE
    • NEW

    Tm mp7 gbb fantastic little smg great recoil 5 gas tight mags quick detach suppressor new aim point high riser sent via 48 hour parcel force (£15) 07999501693 [email protected]

    415.00 GBP

    - GB

  6. GRIZZLYBEAR

    Time Left: 6 days and 23 hours

    • FOR SALE
    • USED

    4 Tokyo marui mws magazines They have had the "green gas mod" so they hold approx 3x more gas the standard. PayPal or banks transfer £40 £5 postage edit: 2 remaining

    40.00 GBP

  7. BYRNEMORGAN52 left Positive feedback for MoriMoriMan
  8. Isawatree

    Bolt br47

    Isawatree posted an advert in Boneyard

    Time Left: 6 days and 23 hours

    • FOR SALE
    • USED

    Gearbox needs building all parts included. buffer tube has been hollowed out so you can rear wire recoil will not work well without new buffer tube externally very good condition. Installed Cyma zeus mosfet, confirmed working before snipping the wiring to feed into the stock tube (thanks bolt) ASG Ultimate bearings Cyma zeus mosfet Quantum bucking and nub SHS M110 spring Looking for £100

    100.00 GBP

  9. StaffSgtSherwin

    Time Left: 6 days and 23 hours

    • FOR SALE
    • NEW

    For sale 2 x Nurpol 120rnd L-Mags for M4/AR rifles Polymer mags Never used Postage included in price

    15.00 GBP

  10. DerDer
    Had some unpleasant experiences with some hop up units in the past. Lonex AK hop unit that required filing and cutting to fit together. Required modification to assemble it and attach it to the barrel. Did fit in a Galil that was quite picky with hop chambers. Then there was a LCT HK33 which I tried three aftermarket hop units. One wouldn't fit at all. The second fit the AEG but after assembly wouldn't allow a magazine to lock in. The third did but just wouldn't feed. One of the units was a Retro arms and the other a G&G, going off memory. Eventually just put the stock unit back in and sold it at a heavy loss to a local at a site.
  11. Cannonfodder
    Iirc rift/white sphere tactical use him too.
  12. StaffSgtSherwin

    Time Left: 6 days and 23 hours

    • FOR SALE
    • USED

    For sale CYMA Glock AEP is two tone blue but has been krylon spray painted green in its past life I do not have the battery or charger for it but they are easily found online Comes with 2 x extended capacity magazines Fire modes - auto/single FPS - approx 220fps on 0.2 Postage included in price

    40.00 GBP

  13.    PopRocket123 reacted to a post in a topic: Gun picture thread
  14.    Cannonfodder reacted to a post in a topic: Macks airsoft dreamers of the week thread
  15. Today
  16. Austeyr
    To be fair, your linked post does also have the error code colours... So it has started up, because it's showing a light 🤔 According to Perun the purple solid light means the trigger contacts are closed
  17.    Socks reacted to a post in a topic: Macks airsoft dreamers of the week thread
  18. Austeyr

    A little while ago a dude messaged me about G&P Peq 2's, I left the chat and now typically need the link again. If you could dm me the place again please 😂

  19.    Socks reacted to a post in a topic: Macks airsoft dreamers of the week thread
  20.    Mtemprell reacted to a post in a topic: British Forces weapons
  21.    Gunboat Diplomat reacted to a post in a topic: Ever had a hop unit that doesn't fit?
  22. Prolish
    Just to clarify, rep handguards fit perfectly on the VFC MP5 - I’ve tested it with both the early skinny handguard, as well as the aftermarket surefire one (pictured as proof!). Additionally, VFC is also compatible with all (that I’ve tested so far) real optics and optics rails too, and I’ve tested quite a niche range. Side note- if anyone is after the burst lower, I’ve got the original one off my MP5 that I’d be willing to dig out and part with.
  23. ButcherBill
    Then my apologies
  24. Lord_Mandrake
    Thanks for trying to help, however the answer you found refers to the programming modes, not the error codes that I'm asking about. The MOSFET is not starting up at all when the battery is connected, therefore, it has detected an unspecified error, indicated by a solid purple light.
  25. ChrisHB96
    ChrisHB96 joined the community
  26. ButcherBill
    Took about 30 seconds to google this... No sound signal while LED glows purple means, that the DMR mode is disabled. https://perunairsoft.pl/abplusplus.pdf
  27. Lord_Mandrake
    Hi all, having some trouble with my M4 AEG. Usually, when I connect the battery, the Perun AB++ flashes green for a few seconds then beeps once loudly with a solid green light = good to go. However, it now just shows a constant purple light and never does its usual handshake with the motor. I've checked the diagnostics codes in the manual but it doesn't mention a solid purple light. Can anyone help?
  28. Lozza17

    Time Left: 6 days and 21 hours

    • FOR SALE
    • USED

    For sale, used but excellent condition Aero Precision Atlas R-one 9.3" M-lok handguard for the AR15, Black. Boxed with all of the mounting hardware. Real Steel. £80 posted (To UK mainland only)

    80.00 GBP

  29. milsimtactical

    Time Left: 6 days and 21 hours

    • FOR SALE
    • USED

    tm mp5sd NGRS come with 8 mag in total 3 lipo battery Odin Speed loader adapter upgrade prometheus EG barrel Purple Hob rubber samarium cobalt motor

    650.00 GBP

  30. Johndaniel4863
    Hi everyone what would be a fair price all in for the following: As new DE UTR45 7xmagazines Acetech tracer Eotech clone M600 clone AN PEQ15 clone with red laser Double pressure pad Its just been sat as an impulsive buy from new but never used in anger sadly
  31. Punisher3990
    I believe the handguard and possibly the m203 is from the specna arms m16 model like this one that was recently listed
  32. Jack B
    Jack B joined the community
  33. Fatboy40
    Yep, been there. However, it was with the holy grail to some, the Retro Arms AR15 CNC hop unit. I bought two of them and the first shock was their internal finishing which had burs here and there, but easily sorted. They were ever so slightly too long though in four AEG's I tried them in, with the upper never going back on properly (both metal and polymer receivers), other than in a G&G Firehawk. The Maxx Model M4A-PRO though, hated by Reddit, fits perfectly in every AEG I put one in, but had to change the nozzle in all of them to get the best out of them.
  34. Jettajvck
    Jettajvck joined the community
  35. Gunboat Diplomat
    Been tinkering with my recent boneyard Specna One series M4 (still unsure of the exact model, but the externals are very nice, think it's an E&C OEM). It came with the old style metal 3-gear hop unit. When I tried to fit my preferred ZCI rotary plastic hop, it sits a tiny bit further back in the upper when fully seated into the outer barrel, making it impossible to close up the lower (albeit only by a couple of mm, but no amount of shoving will allow them to close). I've measured both hops with my verniers and overall outer dimensions are the same, just with differences in the shape and position of various protrusions. Hard to make out from the attached image but the outer barrel has quite a lot of profiling going on, presumably to ensure a secure fit but possibly the source of my issues. I don't want to take a Dremel to it, I'd rather find something that just fits. I suspect the answer to this is just 'airsoft tolerances innit' so I'll have to play the parts roulette to find something that fits. Maybe I should try the newer Specna blue rotary hop, better chance they have engineered it to fit all their receivers?
  36.    GeorgePlaysAirsoft reacted to a post in a topic: Gun picture thread
  37. rj1986
    Indeed, NGRS are held only on the front pin. And the solid stock is only done by 3rd party and aren't the cheapest thing on the planet so you would mention that in the add. Also the mags are regular AEG mags, not NGS. NGRS EPM mags don't have the hump around the top of the feed lips. I therefore put it to you, m'lud, that this is a regular AEG, a NGRS shoe horned into a regular body, or one of those short lived 3rd party recoil kits added
  38.    hunter511 reacted to a post in a topic: Comic con season again
  39.    HZR13 reacted to a post in a topic: Tell Us a Gag. Please!
  40. Laterodectus
    Laterodectus joined the community
  41. filippo rossi
    filippo rossi joined the community
  42. Tygtosh

    Wanted - M4

    Tygtosh posted an advert in Guns Wanted

    Time Left: 6 days and 19 hours

    • WANTED
    • USED

    Wanted - M4 rif must be metal reciever, but other than that will consider most “modern” variants, wanting this for a build I have in mind so send me what you have needs to be delivered to doncaster, and I have a budget of around £150, give or take ready to go thanks!

    150.00 GBP

    Doncaster - GB

  43. Tactical Pith Helmet
    The original Uncle Mike's QD swivel has been made since 1947, and still sells well. Different to the modern design though.
  44. Tactical Pith Helmet

    Has my profile pic disappeared?  

    1. EDcase

      EDcase

      Yep 🙄

      Shows broken image icon

  1. Load more activity
×
×
  • Create New...