All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- For sale
- Used
TM AKM - Steel body kit and dragon steel bolt + spring, brushed worn look Original body, bolt and spring. 6 leak free mags Npas installed, npas adjuster, (old valves and bits included too) Crazy jet barrel and flamingo hop rubber. I used .4s in this, very accurate. Speed loader to help load the mags. Stronger springs for the FCG if you want to install them I never did in the end. Spare nozzle RS magpul grip and handguard, could do with a little more shimming/filling to make it 100% level, it's a little off. Also I think it's a 5ku handguard + gas tube is included. The gas piston tube is a from a real AK it's a real squeeze to get it on there. - If you're going to use it alot I'd get some teflon tape in there to stop the wear on the bolt. No stock included so can fit your own to taste (I had to shim the rail a little to get it level the steel kit was a little off to the stock tm dimensions) £625 posted or £500 collection from Spalding. Collection much preferred. Happy to share any videos etc of it in action. Cheers£500
-
The 'What have you just bought' Thread
GiantKiwi replied to Cameron364's topic in Guns, Gear & Loadouts
Acetech Blaster M module is what they come with. -
Time Left: 6 days and 23 hours
- For sale
- Used
Dont need these suba tanks which are used to fill HPA tanks for airsoft so giving them away for free collection only take 1 or more or all of them as you please DM me to arrange if you want themNO VALUE SPECIFIED
Nottingham, Nottinghamshire - GB
-
They really don't like active braking, they can stutter etc., and pretty much handle stopping themselves using their own circuitry / speed controller. As the Perun AB++ is an inline MOSFET, it's not an optical controller, it's not smart enough to monitor the cycle of the sector gear. I'd bet an "optical controller" would immediately resolve this, telling the motor to stop at exactly the right time to prevent overspin. I'd try a slower / brushed motor first if one's available, and if all is then good consider your options.
-
Time Left: 6 days and 23 hours
- For sale
- As new
Delta Armory R15 FREYA™ Gen.2 13" M-LOK M4/AR-15 AEG, Black With a brand new polarstar kythera engine Fires amazing Beared line Pts stock Nice full metal frame but light waight under 2kg without flash hider Rifle frame in good condition n comes in original box Collect n test fulham london Or paypal n post May trade for a nice Polarstar f2 build Not interested in any hicapas sorry 07960909384 Category: Assault Rifles Location: Hammersmith and Fulham Condition: New FPS: 330*£350
- GB
-
GingyLAD1 joined the community -
Time Left: 6 days and 23 hours
- For sale
- Used
Hi, Recently services by Combat South Comes with Scout Mount, QD Suppressor, M4 Mag adaptor, M4 Mag and original AK Style Mag. [img]https://www.imfdb.org/wiki/File:Strike_Back_S04E01_059.jpg[/img] Price included insured delivery and paypal fees£220
-
The 'What have you just bought' Thread
Jez_Armstrong replied to Cameron364's topic in Guns, Gear & Loadouts
What tracer fits in the AG KAC can as I've got one too -
Time Left: 6 days and 23 hours
- For sale
- Used
For sale is my KJ Works Glock 19 and KWA Glock 23, the pistols are in fair condition, reason for the sale is thinning down my pistol collection. The KJ Works Glock 19 is plastic framed and bodied, Gas Blow Back, and comes with three magazines, a pistol holster and magazine holster. The KWA Glock 23 is again plastic framed and bodied, comes with one magazine. I last had a play with these GBB’s around six months ago and the magazines were holding gas, from memory two of the KJ Works magazines were leaking a tad, I haven’t actually got an green gas to test these, but worst case the magazine’s may need some O ring loving. More than happy to deliver around the Lowestoft Suffolk area, or can post these via Parcelforce 48 Recorded Courier for an extra £10, if you require any additional pictures or information please let me know, thank you 😁£100
- GB
-
Time Left: 6 days and 23 hours
- For sale
- As new
Ssg1 g&g m4 with drop stock Mosfet 4 see through ssg1 mags 1 battery Tracer adapter Really rapid responsive aeg Mosfet is amazing Drop stock super comfy with mask on Selling as gone hpa If the pink offends u can spray paint n epoxy coat in black matt Or can black wrap it 07960909384 Collect london fulham Or paypal n post 48hr tracked for £10£230
- GB
-
Thanks all, I am running a 300mm x 6.01mm barrel and 0.28g BBs. Cut off lever is working fine and being tripped by the sector gear. I am starting to think I will sell the Warhead motor and fit an XT or SHS one as this is only a back up gun and spends more time being used as a test bench than actual use 😁
-
yes, the rear of the upper receiver can crack due to the bolt hammering it over time. Get a sling mount to reinforce the area. https://www.skirmshop.co.uk/mp7-sling-swivel-end-for-tm-mp7a1.html The mags can leak eventually and I've had to rebuild 8 so far by removing the bottom and sealing with silicon. If you go for a MP7 style silencer try before you buy as I've had issues with some silencers smashing the BB's because of alignment.
-
Time Left: 6 days and 23 hours
- For sale
- As new
Two unused mags didn't fit in my TM Hi capa but fit fine in my WE. Sold the gun just after I bought these so they've been stored since. both magazines hold gas. £30 for both, postage and fees included.£30
-
Time Left: 6 days and 23 hours
- For sale
- Used
Have owned this for over a year, mainly used for garden plinking and general badassery. Magazine holds gas and functions as it should. Minor damage by the hammer on the left side where a piece of plastic has come off but doesn't effect function. Other than that the gun has moderate wear on the slide but that's about it. Unsure of what FPS, haven't actually used it in a skirmish so have never felt a need to chrono it. I assume with it being NBB it'll be entirely gas-dependent. £40 postage and fees included.£40
Nottingham - GB
-
OutboundBread joined the community -
Time Left: 6 days and 23 hours
- For sale
- As new
Unsure of what brand these magazines are unfortunately. My father bought these for me around 15 years ago when I had an ASG M1 carbine and found out that they wouldn't fit. At the time the King arms M1 wasn't around so have no idea what these are. One of them holds gas and the other hasn't been tested. Other than that they've got a bit of age to them as they've been sat in a loft and gone through 3 house moves in that time! Selling both of them for £30 quid, if they work in your king arms then you've got some cheap mags! if not then, they might need a little maintenance 👍 Postage included in the price.£30
- GB
-
Herrgh reacted to a post in a topic:
Warhead UK rebranding to Redux Airsoft
-
Herrgh reacted to a post in a topic:
Warhead UK rebranding to Redux Airsoft
-
Time Left: 6 days and 23 hours
- For sale
- As new
Selling this as I've got a VFC M727 which I prefer using and don't go enough to warrant a back up gun. Purchased around 2 months ago and haven't skirmished with it so it's new condition. The only downside is I've attempted to remove the Specna sticker off the side (poorly) and so half of it remains. Other than that all I've done is add a picatinny handguard, fake acog, functional peq box, and a sling. The rail system is plastic and is mainly there for looks. Also pictured are 4 specna stanag mid caps and the two plastic mid caps. Currently the gun is set to semi and 3 round burst but will include the HAL etu card with the gun or can print off another one. Changing the fire modes is quite easy and AST Kilo on youtube does a great demonstration on how to do it. The gun was chronoed at 347fps on a 0.2 at the time of purchase. Everything pictured is included in the sale, bear in mind I might have to send this over two parcels so postage is a little higher than usual (around 18£) £220 posted or collection can be arranged from Nottingham for £200. Any more questions don't hesitate to message me. Note this is a sale only and will not do a swap deal or anything like that 👍£220
Nottingham, Please select a region, state or province. - GB
-
Rogerborg reacted to a post in a topic:
Warhead UK rebranding to Redux Airsoft
-
Sifu Steve reacted to a post in a topic:
Gun picture thread
-
Sifu Steve reacted to a post in a topic:
Gun picture thread
- Today
-
I'm going to be getting a TM MP7 GBB this weekend. Are there any issues or things I should know about first?
-
well yes because your barrel on a 7inch is only 20cm or so. definitely you're nowhere near that situation but that's a terrible comparison lol. if the OP has a 363mm+ barrel and using .32 or heavier bbs with -5 on sector then definitely it is to be considered. in any case case that is a corner case, without knowing OP setup it's difficult to help; independently it is a terrible setup (7.4v+13.1+brushless) IMO.
-
Time Left: 6 days and 22 hours
- For sale
- Used
OneTigris plate carrier Rigid plates Placard replaced with elastic warrior assault systems triple 5.56 pouch £40 posted ono£40
-
Time Left: 6 days and 22 hours
- Wanted
- Used or as new
Looking for a boneyard krytac, if anyone has one available please let me know preferably the spr but anything that uses v2 is consideredNO VALUE SPECIFIED
-
We're talking silly long barrels though, 400mm + Your average 360mm-and-below barreled AEG can take some short stroking. My 7" SSG is short stroked by 4 teeth and I'm pretty sure I can knock five more off without worrying in the slightest about running into voluming issues.
-
I mean, brushless motors have loads of torque and the setup is not great to start with. there's lots of torque and lots of inertia due to the low ratio Gearset. I really don't get why people use 7.4v with 13.1 gears. just use 11.1 and 18:1 gears. same semi time and way less strain on the Gearset and motor (building torque with gears, NOT with motor!) but again, if changing gears and battery is not a possibility then yeah the only solution is to short stroke and use a heavier spring. at some point based on BBs used and barrel length the cylinder to barrel volume ratio will be affected so short stroking won't be the best solution
-
Varying levels of QC. Mostly depends on how much profit the brand wants on their BBs. I've seen it with a "local" brand, they were cheap and good at first, then lost the cheap part and now lost the good part as well, to the point I'd rather overpay for G&G bbs instead. A true shame that warhead decided to fuck UK users like this, after all they were a key part of development and marketing in general (Luke pushed them real hard before Solink/T238 took over)
-
Time Left: 6 days and 21 hours
- For sale
- Used
Selling all my project/old RIFs, low prices for quick sale. £20 postage, PayPal g&c. Top Rifle - G&G Srxl red. Brand new E&C complete gearbox, prometheus 6.01 430mm inner barrel, barrel extension, 16 inch mlok handguard. Missing baseplate for the PTS syndicate grip, motor and flash-hider. This was a project gun I just never finished. £140 Bottom Rifle - Classic Army M15A4 CQB-R Seal. Old gun but many internal parts are new. Worked on by Negative airsoft who put the hop unit, new gears and a mosfet. Since then it has been worked on by myself (magic gone) and I messed up my wiring loom at some point so it has a new loom with no mosfet. Shoots well but does not have a safety and occasionally double shoots on semi. It also has a slightly wobbly reciever but this could be solved with a locking front pin. £100 TM P226 E2 - Stock internals, missing rear and front sights (temp replace by bolts). Real Hogue P226 grip badly fitted by me. Electrical tape because the grip screws are stripped. Fully working, comes with 1 TM magazine. £70 WE Hi capa 5.1 dragoon. All red parts are off a vorsk hi capa as well as the barrel assembly. Comes with 1 vorsk magazine. Works well but old. £50NO VALUE SPECIFIED
-
Wavey_Gravey reacted to a post in a topic:
What have you made?
-
The tube that attaches to the iris is 3d printed so it slides over the end of my tube Cost me £22 per iris and 30 min of 3d printing
-
Time Left: 6 days and 20 hours
- For sale
- Used
Final one of the lot. Gordy inspired build, full 14.5 outer barrel with a custom over barrel suppressor. Repro aimpoint comp m2 (needs batteries) Carry handle to picatinny adapter 5x vn style mag (they need maintenance as not used in a year and were left without gas) Spare bolt with npas Selling as not used much, think I've only run it once since completing the build as I got too many guns. I think sear might be going on this as sometimes goes full auto in semi (common fault) Can post for extra £15£350
St helens - GB
