DanBow Posted May 2 Author Share Posted May 2 1 hour ago, gavinkempsell said: I know... as I typed it I looked at my pews and thought I don't need this big a collection either, the difference in my mind is... I can look at & enjoy my pews but a gun case is really a thing to carry them 10 feet from my front door to the boot of my car, I'll end up getting one eventually but it's low on my list of airsoft priorities (for now). One of these would be nice... Ooh, now that is nice. I'm sort of lucky that i only have 4 pews, for now, and dont really have anywhere to keep them in the house so putting thw3m in cases where i can then stash them out of the way makes sense. I do, as of Saturday, have a spare bedroom so I think that might become 'The Gun Room' with them on display. Then i can add more. 😁 gavinkempsell, DJsnipe and Skullchewer 2 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted May 2 Share Posted May 2 I highly recommend grid mesh for your gun wall Lozart and DanBow 1 1 Link to comment Share on other sites More sharing options...
DanBow Posted May 2 Author Share Posted May 2 Ill be rereading the display your guns thread for some inspiration. gavinkempsell 1 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted May 2 Share Posted May 2 I keep eyeing up the Hardigg cases on eBay The ones that will hold like 10-12 AR’s 😂 The YouTuber Whistlin Diesel has bloody hundreds of them for display, and at like £250 a pop Thats a lot of spendy! Link to comment Share on other sites More sharing options...
Jacob Wright Posted May 3 Share Posted May 3 I lucked out with my case - £50 from someone who was just about to put it in a skip... Glad I've got it though, makes it easy to carry my rifles and I can sling it in the boot of the car without worrying. Plus it has doubled up as a nice table on events! DanBow 1 Link to comment Share on other sites More sharing options...
DanBow Posted May 3 Author Share Posted May 3 3 hours ago, Jacob Wright said: I lucked out with my case - £50 from someone who was just about to put it in a skip Funnily enough i got my first one off Facebook marketplace for £30 because it had been left ourside and was a bit wet and dirty. Second one was £58 off ebay but £20 postage. Still a bit of a bargain though. Jacob Wright 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted May 3 Share Posted May 3 Feck it... just ordered one from BBguns4less. DanBow 1 Link to comment Share on other sites More sharing options...
DanBow Posted May 3 Author Share Posted May 3 1 minute ago, gavinkempsell said: Feck it... just ordered one from BBguns4less. Which one? Link to comment Share on other sites More sharing options...
gavinkempsell Posted May 3 Share Posted May 3 (edited) the XL for £99 odd, only problem was picking the colour. Wish I'd bought the two from HuttArmouries when I saw them in the classifieds. https://bbguns4less.co.uk/products/nuprol-extra-large-hard-case-with-wheels-in-black-pick-pluck-foam.html Edited May 3 by gavinkempsell DanBow 1 Link to comment Share on other sites More sharing options...
DanBow Posted May 3 Author Share Posted May 3 Just now, gavinkempsell said: the XL for £99 odd, only problem was picking the colour. What did you go for? Link to comment Share on other sites More sharing options...
gavinkempsell Posted May 3 Share Posted May 3 1 minute ago, DanBow said: What did you go for? https://bbguns4less.co.uk/products/nuprol-extra-large-hard-case-with-wheels-in-black-pick-pluck-foam.html DJsnipe and DanBow 2 Link to comment Share on other sites More sharing options...
DanBow Posted May 3 Author Share Posted May 3 2 minutes ago, gavinkempsell said: https://bbguns4less.co.uk/products/nuprol-extra-large-hard-case-with-wheels-in-black-pick-pluck-foam.html Nice. Looking forward to your layout pics. 😁 DJsnipe and gavinkempsell 1 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted May 3 Share Posted May 3 must admit I had my L85A3 case out last night to 'practice' lol. Spent a good bit of time looking for a deeper case but they seem to be a fairly standard 5" internal depth. DanBow 1 Link to comment Share on other sites More sharing options...
Pseudotectonic Posted May 4 Share Posted May 4 The only thing that jumps out at me looking at these photos is you are supposed to leave a certain thickness of foam around each and every item, and also between them (also between layers), which can be as little as ~1 cm for lighter items to at least ~5 cm for bigger items, if you don't leave enough foam around the outer edges or have guns touching each other there won't be enough foam thickness to cushion an impact, in theory DJsnipe, Enid_Puceflange and DanBow 3 Link to comment Share on other sites More sharing options...
DJsnipe Posted May 5 Share Posted May 5 On 03/05/2024 at 14:53, gavinkempsell said: https://bbguns4less.co.uk/products/nuprol-extra-large-hard-case-with-wheels-in-black-pick-pluck-foam.html Nice looking case, very similar to a large Plano case I use (and love). It looks like the latches may be better on the Nuprol. Good luck. gavinkempsell 1 Link to comment Share on other sites More sharing options...
Caj109 Posted May 5 Share Posted May 5 On 01/05/2024 at 09:50, Jez_Armstrong said: Nice setup! How are the magazines in the lid held in place? Just a strap that goes under the foam? Link to comment Share on other sites More sharing options...
Moderators Jez_Armstrong Posted May 5 Moderators Share Posted May 5 1 hour ago, Caj109 said: Nice setup! How are the magazines in the lid held in place? Just a strap that goes under the foam? Yep pretty much Caj109 1 Link to comment Share on other sites More sharing options...
Shamal Posted May 5 Share Posted May 5 Bloody hell mate you must have arms like Popeye lugging that to a game lol Looks good though.👍 Link to comment Share on other sites More sharing options...
Davet Posted May 6 Share Posted May 6 On 05/05/2024 at 13:05, Caj109 said: Nice setup! How are the magazines in the lid held in place? Just a strap that goes under the foam? From Amazon - roll of Velcro-style tape and buckles. Cut the tape to your own desired sizes. https://amzn.eu/d/asfvnpt Caj109 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted May 6 Share Posted May 6 1 minute ago, Davet said: From Amazon - roll of Velcro-style tape and buckles. Cut the tape to your own desired sizes. https://amzn.eu/d/asfvnpt How have you attached the velcro to the lid? are they just strapped to the foam upper? Link to comment Share on other sites More sharing options...
Davet Posted May 6 Share Posted May 6 6 minutes ago, gavinkempsell said: How have you attached the velcro to the lid? are they just strapped to the foam upper? I’ll post some photos of my case tomorrow - similar layout to @Jez_Armstrong’s - I cut a couple of slots through the base of the foam and then thread the strap through so it wraps around the underside of the foam then meets back up top and buckles/velcroes over whatever item it’s securing. gavinkempsell 1 Link to comment Share on other sites More sharing options...
Davet Posted May 7 Share Posted May 7 On 05/05/2024 at 13:05, Caj109 said: Nice setup! How are the magazines in the lid held in place? Just a strap that goes under the foam? Still a work in progress… gavinkempsell, Caj109, DanBow and 1 other 4 Link to comment Share on other sites More sharing options...
ParHunter Posted May 7 Share Posted May 7 On 03/05/2024 at 20:53, gavinkempsell said: https://bbguns4less.co.uk/products/nuprol-extra-large-hard-case-with-wheels-in-black-pick-pluck-foam.html I’ve got the same case but with the normal foam. Is the pick&pluck foam worth it? At the moment I can chuck everything in without worrying too much but you have to press the lid down quite a bit to close it. Can you get the pick & plug foam on its own somewhere? Link to comment Share on other sites More sharing options...
gavinkempsell Posted May 7 Share Posted May 7 (edited) 6 minutes ago, ParHunter said: I’ve got the same case but with the normal foam. Is the pick&pluck foam worth it? At the moment I can chuck everything in without worrying too much but you have to press the lid down quite a bit to close it. Can you get the pick & plug foam on its own somewhere? Not been delivered yet so... dunno. I think the pluck n pick foam is developed to mould the foam around the pew to hold it securely, sounds like your case is just using compression to hold the items securely and that's why it's tight. The foam is probably available to buy on it's own, google is your friend. There is another type called shadow foam that you cut the pew's outline into the foam. Edited May 7 by gavinkempsell Link to comment Share on other sites More sharing options...
Tommikka Posted May 7 Share Posted May 7 57 minutes ago, ParHunter said: I’ve got the same case but with the normal foam. Is the pick&pluck foam worth it? At the moment I can chuck everything in without worrying too much but you have to press the lid down quite a bit to close it. Can you get the pick & plug foam on its own somewhere? All of the foams do the same basic job of providing padding. Simple basic foam, uncut will happily compress to hold and protect your equipment. You can put pretty much anything in the case, in any position and unless it’s too thick preventing you from forcing shut and as long as you don’t put in too much equipment in too close then it will hold and protect. The items may slip around a bit bumping into each other depending on how close and how tight the fit is vs how hefty the items are. You can cut in to standard foam to make pockets to avoid your equipment sliding and to make shutting easier Standard foam can be cut with a knife with good or bad looking results being dependant on how carefully you cut - or use a laser cut A single piece/layer of foam can be more difficult to cut neatly into the right depths for various different items Pick and pluck is typically used in two pieces/layers - one layer as standard foam, and the other piece/layer as a precut grid with small points uncut. You plan your layout then ‘pick and pluck’ ripping out the squares that you want to place your equipment in. This results in a pixelated style, or you can cut some of the grid with a knife (or laser cut - but if you’re laser cutting then you’ve defeated the object of using pick & pluck) Shadow foam is a brand, which comes in multiple colours, eg standard grey on the top layer and a bright colour in the lower layer(s)*. Therefore when cut to fit your equipment an empty slot is obvious as you can see a coloured ‘shadow’ Shadow foam is inspired by the wall mounted shadow boards traditionally used in workshops, schools and prisons to make it obvious when a tool is missing * Note that I have referred to ‘pieces’ and ‘layers’. These are not technical terms, but just me referring to how many blocks of foam you put into the case. Normally you could think of it as a top and bottom for the lid and base. But the bottom / base could be two pieces of foam such as with pick & pluck - one whole block approx half the depth of the base of your case and a second on top that you cut/pluck apart to form the gaps that you insert your equipment in A single piece of ShadowFoam is made of a number of layers. When you cut the shape you then peel out a layer of foam. A thin piece of equipment can be accommodated with one layer peeled out a thicker piece of equipment needs more than one layer peeled out to give greater depth. Pick & pluck: https://youtu.be/dSC2vEVfSIQ?si=rHpqQ2eESKVJ0JE1 Shadow foam: https://youtu.be/GMBziTVpoWE?si=aIH3vxWDz8aV-A2a ParHunter and gavinkempsell 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now