Dan Robinson Posted August 23, 2023 Share Posted August 23, 2023 Couple of questions if you dont mind, as it's my first GBBR... How do you adjust the hop on this....I'm guessing clockwise (as you look down the barrel) increases? Given a reasonably full gas bottle, how long does it take to charge the 30 round mags? Do they do slightly higher capacity mags? Say 150 bbs rather than 30. How compatible are WE spares - I've read about the pot metal used in these things 🤪. How strong is the folding stock? Would I be nuts to use it for a sling? As always, tah in advance. Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted August 23, 2023 Share Posted August 23, 2023 Congrats on your new gat, and welcome to the Gas Blow Back Flexors Club. You'll find your smoking jacket and glass of fine brandy or champagne will be provided by Jeeves very shortly 🥂 gavinkempsell, Beorn, Nick G and 1 other 4 Link to comment Share on other sites More sharing options...
Dan Robinson Posted August 23, 2023 Author Share Posted August 23, 2023 2 minutes ago, RostokMcSpoons said: Gas Blow Back Fixers Club Hopefully it doesn't turn into this club. RostokMcSpoons 1 Link to comment Share on other sites More sharing options...
C-Diddy Posted August 23, 2023 Share Posted August 23, 2023 1 hour ago, RostokMcSpoons said: Congrats on your new gat, and welcome to the Gas Blow Back Flexors Club. You'll find your smoking jacket and glass of fine brandy or champagne will be provided by Jeeves very shortly 🥂 RostokMcSpoons 1 Link to comment Share on other sites More sharing options...
Asomodai Posted August 24, 2023 Share Posted August 24, 2023 12 hours ago, Dan Robinson said: Couple of questions if you dont mind, as it's my first GBBR... How do you adjust the hop on this....I'm guessing clockwise (as you look down the barrel) increases? Given a reasonably full gas bottle, how long does it take to charge the 30 round mags? Do they do slightly higher capacity mags? Say 150 bbs rather than 30. How compatible are WE spares - I've read about the pot metal used in these things 🤪. How strong is the folding stock? Would I be nuts to use it for a sling? As always, tah in advance. Yup 15 seconds? if it's a silent fill valve, you wont lose much gas if you overgas it anyway. Nope Yes, practically the same rifle. Eh, I never use that position on any G36 rifles. Dan Robinson 1 Link to comment Share on other sites More sharing options...
Dan Robinson Posted August 24, 2023 Author Share Posted August 24, 2023 1 hour ago, Asomodai said: Yup 15 seconds? if it's a silent fill valve, you wont lose much gas if you overgas it anyway. Nope Yes, practically the same rifle. Eh, I never use that position on any G36 rifles. Perfect, cheers. BTW, I'm taking my pews at the weekend, but my knee is still Donald Ducked from last gameday, getting a new brace today, so we'll see how things go for Monday. 👍 Link to comment Share on other sites More sharing options...
CrackCommandoUnit1972 Posted August 25, 2023 Share Posted August 25, 2023 As far as I know, its a clone of the WE G36 so should be compatable with any WE spares. RA Tech do a load of parts for the G36 but I would just leave it stock until it breaks. However, I have a few RA Tech parts in my WE G36. I don't know if the AA version has a plastic charging handle, if so, I would recommend getting a metal one as this will 100% break on you. Dan Robinson 1 Link to comment Share on other sites More sharing options...
Dan Robinson Posted August 25, 2023 Author Share Posted August 25, 2023 (edited) 1 hour ago, CrackCommandoUnit1972 said: I don't know if the AA version has a plastic charging handle Yeah - the little handle bit on the end is plastic with a rather small looking pin holding it on. So will look at getting a spare in...// [scroll forward20 minutes]... you gotta love oriental websites and their horrible layouts 🤣 Found it on page 37.... http://en.ratech.com.tw/english/index.php?option=com_content&view=article&id=176:rag-we-094&catid=27&Itemid=119 And in the UK - https://www.milspecsolutions.co.uk/gas-blowback-parts/we-rifle-parts/we-g36-(999)-parts/WE-G36-(999)-Cocking-Handle-Set.html for my future reference as much as anything... https://www.milspecsolutions.co.uk/ra-tech-we-g36-g39-series-charging-handle.html Gave the barrel a nice clean, so will have a play with some mags tomorrow and see what can be done with the hop. Edited August 25, 2023 by Dan Robinson CrackCommandoUnit1972 1 Link to comment Share on other sites More sharing options...
CrackCommandoUnit1972 Posted August 25, 2023 Share Posted August 25, 2023 What FPS are you getting from it? On a hot day my WE one can shoot well over 400fps and it needs a NPAS and weaker gas to get it close to be usuable. Link to comment Share on other sites More sharing options...
Dan Robinson Posted August 25, 2023 Author Share Posted August 25, 2023 I have had a bit of a roller coaster on that one. A full mag will be well over 400 using ASG Ultra Air Gas. After a few shots it bounces around between 250 and 340. I shall load one up and post some chrono pics... My butane bottle adapter isn't coming until next week. I'm hoping the much bigger bottles will give a more consistent fill pressure. Link to comment Share on other sites More sharing options...
Dan Robinson Posted August 25, 2023 Author Share Posted August 25, 2023 Well, I've run 7 mags through on the Ultra Air - although I think that can is near empty: 360.9 367 335.6 342.4 227 244.4 257.3 378.7 43.7 217.3 243.6 226.8 71.1 255.4 117 363.7 180.4 237.8 82.3 105.4 256.4 374.5 359.7 249 263.8 258.4 220.3 254.8 381.1 250.8 230.9 233.9 289.3 128 64.3 326 319.1 309.6 231.8 279.2 198.2 251.6 296.1 350.4 322.5 230.3 286.2 273.5 253.7 368.2 260.6 322.5 161.1 279.9 170.9 212.1 324.2 356.1 319.1 241.4 279.2 47.6 250.5 367.6 342.8 317.4 242.2 286.2 7 270.4 365.9 339 312 234.6 279.9 270.1 265.9 368.7 342.3 311.2 232.3 281.8 273.8 262.6 160.3 184.4 309.6 252.4 279.5 251.6 241.7 338.5 337.5 306.4 236.2 277.3 265.6 260.1 265.3 364.2 303.3 239.7 278.6 233.4 260.4 356.6 205.5 301.4 231.8 278.9 266.2 258.7 308.8 152.8 297.6 237.6 255.9 267.6 256.7 353 109.2 395.4 164.4 272.2 267 255.6 354 164.5 293.2 231.6 278.9 266.7 216.98 355.1 176.8 287.3 231.6 277.9 267.3 257.3 346.3 274.9 299.1 234.8 276 265.3 257.3 347.3 325.6 287.6 234.1 274.4 243.4 253.7 343.3 330.1 173.7 226.8 259.8 261.2 252.4 345.3 290 189 267 264.1 250 343.3 280.5 227.2 273.8 260.9 249 277.6 226.6 274.7 265.6 247.9 275.3 229.87 272.2 258.9 247.2 277.6 99.3 274.7 217.1 247.7 55.6 46.2 246.9 250 244.1 F F 194.7 248.2 246.9 Then another 7 through with Abbey 144a: 355.1 321.56 300.2 234.1 295.8 279.5 263.2 335.6 193.1 287.2 287.3 283.5 262.1 336.1 318.2 289.3 241.2 290.7 279.2 262.1 331 319.9 289.3 246.2 289.3 280.2 261.5 328.7 311.6 295 252.4 286.6 2894.2 261.1 68 317.8 294.3 258.4 287.3 280.8 256.7 323.4 311.6 291.1 263.2 289.3 282.2 261.8 327.4 322.9 291.8 262.4 285.5 276.3 253.2 322.5 314.4 290.7 263.8 285.9 281.2 252.1 322.5 314.4 291.5 265.6 287.3 281.5 232.1 321.2 310.8 287.9 265.3 285.5 278.6 251.1 319.9 304.4 290.4 269.1 287.3 279.2 249.8 283.5 304.8 290 263.8 290 276.9 255.6 285.2 310.8 267.9 266.4 284.5 273.1 302.1 314.9 305.2 289.3 266.4 284.5 252.9 245.6 314.4 289.7 267 283.2 272.2 244.9 313.2 289.3 270.7 284.2 271.3 181.4 312.4 289 270.1 284.2 270.1 244.4 310.4 288.3 269.8 285.5 271.9 242.4 307.6 285.5 272.2 282.5 264.4 308 290 271.9 279.9 267.3 306 288.6 275 283.8 266.2 305.6 287.3 273 279.5 270.7 310.4 268.5 0.1 280.2 269.5 306.4 286.6 273.8 279.5 267 302.5 284.9 275.7 278.9 266.4 304.4 285.5 277.6 284.2 263.5 302.1 287.9 271.9 278.6 241.9 286.6 283.2 281.2 275 285.2 282.8 296.5 271.3 287.3 279.2 285.2 263.2 F F F E Abbey 144a: The F denotes the load that was refilled with gas. There are some anomalies, which I am hoping was down to the fact there were a few pre-fired BBs in that bottle. More worryingly, a metal pin has fallen out of my of the pews - it could be a Glock, the 1911, the Auto 9 or the new G36. Sad times. 😪 CrackCommandoUnit1972 1 Link to comment Share on other sites More sharing options...
CrackCommandoUnit1972 Posted August 25, 2023 Share Posted August 25, 2023 Those are some whacky numbers there. Sometimes, with Gbbr's it not about the consistancy, it's the experience. Post a pic of the pin, some airsoft super tech might be able to ID it for you. Although you may find out when one of your pews falls to bits mid game Dan Robinson 1 Link to comment Share on other sites More sharing options...
Dan Robinson Posted August 25, 2023 Author Share Posted August 25, 2023 Well, it ended up being two parts lose.... Took the front grop off and this little plate came out too. Can't see where either came from (limke I said, the pin could be from another pew). Also found the castellated nut that holds the outer barrel in place was totally undone. Can't beat airsoft QC 🤣 Link to comment Share on other sites More sharing options...
CrackCommandoUnit1972 Posted August 26, 2023 Share Posted August 26, 2023 I have just stripped mine down and cant see anything that resembles the retangular peice you have found. And there is nothing in that diagramme that resembles that bit either The only pin from under the hand guard I can see it the one that holds the mock gas block in place. This website seems to stock every bit you need for you rifle. https://www.kyairsoft.com/parts/we-rifles-gbbr/999-series.html Dan Robinson 1 Link to comment Share on other sites More sharing options...
SheriffHD Posted August 26, 2023 Share Posted August 26, 2023 That peice is from the mock gas cylinder that's at the front I do believe. Should feel a slight spring tension when you slide it in. I've had mine 6 months now, on mine I've developed an issue with it shooting fully auto on semi but the plastic tip on the charging handle has stood up fine. Dan Robinson 1 Link to comment Share on other sites More sharing options...
Dan Robinson Posted August 26, 2023 Author Share Posted August 26, 2023 5 hours ago, CrackCommandoUnit1972 said: The only pin from under the hand guard I can see it the one that holds the mock gas block in place I couldn't see any missing pins, and closer inspection shows that this pin is probably older than this pew. Time to take the pistols apart again methinks 4 hours ago, SheriffHD said: That peice is from the mock gas cylinder that's at the front I do believe. Should feel a slight spring tension when you slide it in Which bit dude? I can feel the spring in the gas tube. Link to comment Share on other sites More sharing options...
mightyjebus Posted August 26, 2023 Share Posted August 26, 2023 (edited) the pin looks like 3 possible things, the pin from the G36 mag release, the rear lower receiver on a glock or the lower receiver gearbox pin from an M4 Edited August 26, 2023 by mightyjebus Dan Robinson 1 Link to comment Share on other sites More sharing options...
Dan Robinson Posted August 26, 2023 Author Share Posted August 26, 2023 10 minutes ago, mightyjebus said: lower receiver gearbox pin from an M4 I'm pretty sure it isn't that (i havent takebone apart for a couple of weeks, but good call on the other two. Should be testing out those glasses Monday 👍 Link to comment Share on other sites More sharing options...
MirrorMan Posted July 3 Share Posted July 3 On 23/08/2023 at 21:13, Dan Robinson said: Hopefully it doesn't turn into this club. I'm joining like it or not 😂 Dan Robinson 1 Link to comment Share on other sites More sharing options...
gavinkempsell Posted July 3 Share Posted July 3 As above it looks like #52 in this diagram, I'll assume airsoft isn't your priority just now, quessing you're spending Hong Kong Dollars just now but here's the diagram... https://www.kyairsoft.com/999-46-g39-flash-hider-gbbr.html Dan Robinson 1 Link to comment Share on other sites More sharing options...
Dan Robinson Posted July 25 Author Share Posted July 25 Harro! Sorry for silent running recently.... its been crazy with work, plus I got covid, plus the boy is back for the summer so I've been trying to spend time with him. So waiting to hear back from Bespoke....see other thread 🤣 Link to comment Share on other sites More sharing options...
RostokMcSpoons Posted July 25 Share Posted July 25 Hi ho, you going quiet has coincided with me being on hiatus on medical advice... Which I've now decided to ignore. So hopefully see you on the battlefield at Spec Ops soon 😎. I might be going Sunday morning. Depends on whether I'm still alive, my wife might notice a guitar getting delivered on Saturday, and then.... 💩💩💩 Dan Robinson 1 Link to comment Share on other sites More sharing options...
Dan Robinson Posted July 25 Author Share Posted July 25 28 minutes ago, RostokMcSpoons said: Hi ho, you going quiet has coincided with me being on hiatus on medical advice... Which I've now decided to ignore. So hopefully see you on the battlefield at Spec Ops soon 😎. I might be going Sunday morning. Depends on whether I'm still alive, my wife might notice a guitar getting delivered on Saturday, and then.... 💩💩💩 We're at AWA this weekend, Spec Ops next week with a plus 1 RostokMcSpoons 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now