Jump to content

AA G36

Dan Robinson

By Dan Robinson,
in Gas Guns

 Share
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Dan Robinson Veteran

Dan Robinson

Posted
Posted

Couple of questions if you dont mind, as it's my first GBBR...

 

  • How do you adjust the hop on this....I'm guessing clockwise (as you look down the barrel) increases?
  • Given a reasonably full gas bottle, how long does it take to charge the 30 round mags?
  • Do they do slightly higher capacity mags?  Say 150 bbs rather than 30.
  • How compatible are WE spares - I've read about the pot metal used in these things 🤪.
  • How strong is the folding stock?  Would I be nuts to use it for a sling?

 

 

As always,  tah in advance.

 

 

Link to comment
Share on other sites
RostokMcSpoons Grand Master

RostokMcSpoons

Posted
Posted

Congrats on your new gat, and welcome to the Gas Blow Back Flexors Club.  You'll find your smoking jacket and glass of fine brandy or champagne will be provided by Jeeves very shortly 🥂

Link to comment
Share on other sites
C-Diddy Mentor

C-Diddy

Posted
Posted
1 hour ago, RostokMcSpoons said:

Congrats on your new gat, and welcome to the Gas Blow Back Flexors Club.  You'll find your smoking jacket and glass of fine brandy or champagne will be provided by Jeeves very shortly 🥂

spacer.png

Link to comment
Share on other sites
Asomodai Grand Master

Asomodai

Posted
Posted
12 hours ago, Dan Robinson said:

Couple of questions if you dont mind, as it's my first GBBR...

 

  • How do you adjust the hop on this....I'm guessing clockwise (as you look down the barrel) increases?
  • Given a reasonably full gas bottle, how long does it take to charge the 30 round mags?
  • Do they do slightly higher capacity mags?  Say 150 bbs rather than 30.
  • How compatible are WE spares - I've read about the pot metal used in these things 🤪.
  • How strong is the folding stock?  Would I be nuts to use it for a sling?

 

 

As always,  tah in advance.

 

 

 

Yup

15 seconds? if it's a silent fill valve, you wont lose much gas if you overgas it anyway. 

Nope

Yes, practically the same rifle. 

Eh, I never use that position on any G36 rifles. 

 

Link to comment
Share on other sites
Dan Robinson Veteran

Dan Robinson

Posted
  • Author
Posted
1 hour ago, Asomodai said:

 

Yup

15 seconds? if it's a silent fill valve, you wont lose much gas if you overgas it anyway. 

Nope

Yes, practically the same rifle. 

Eh, I never use that position on any G36 rifles. 

 

Perfect,  cheers. 

 

BTW, I'm taking my pews at the weekend, but my knee is still Donald Ducked from last gameday, getting a new brace today, so we'll see how things go for Monday. 👍

Link to comment
Share on other sites
CrackCommandoUnit1972 Proficient

CrackCommandoUnit1972

Posted
Posted

As far as I know, its a clone of the WE G36 so should be compatable with any WE spares. RA Tech do a load of parts for the G36 but I would just leave it stock until it breaks.

 

However, I have a few RA Tech parts in my WE G36. I don't know if the AA version has a plastic charging handle, if so, I would recommend getting a metal one as this will 100% break on you.

 

 

Link to comment
Share on other sites
Dan Robinson Veteran

Dan Robinson

Posted
  • Author
Posted (edited)
1 hour ago, CrackCommandoUnit1972 said:

I don't know if the AA version has a plastic charging handle

 

Yeah - the little handle bit on the end is plastic with a rather small looking pin holding it on.  So will look at getting a spare in...// [scroll forward20 minutes]...  you gotta love oriental websites and their horrible layouts 🤣

 

Found it on page 37....   http://en.ratech.com.tw/english/index.php?option=com_content&view=article&id=176:rag-we-094&catid=27&Itemid=119

 

And in the UK - https://www.milspecsolutions.co.uk/gas-blowback-parts/we-rifle-parts/we-g36-(999)-parts/WE-G36-(999)-Cocking-Handle-Set.html  for my future reference as much as anything...  https://www.milspecsolutions.co.uk/ra-tech-we-g36-g39-series-charging-handle.html

 

Gave the barrel a nice clean, so will have a play with some mags tomorrow and see what can be done with the hop.

Edited by Dan Robinson
Link to comment
Share on other sites
CrackCommandoUnit1972 Proficient

CrackCommandoUnit1972

Posted
Posted

What FPS are you getting from it? On a hot day my WE one can shoot well over 400fps and it needs a NPAS and weaker gas to get it close to be usuable.

Link to comment
Share on other sites
Dan Robinson Veteran

Dan Robinson

Posted
  • Author
Posted

I have had a bit of a roller coaster on that one.

 

A full mag will be well over 400 using ASG Ultra Air Gas.  After a few shots it bounces around between  250 and 340.  I shall load one up and post some chrono pics...  My butane bottle adapter isn't coming until next week.  I'm hoping the much bigger bottles will give a more consistent fill pressure.

Link to comment
Share on other sites
Dan Robinson Veteran

Dan Robinson

Posted
  • Author
Posted

Well, I've run 7 mags through on the Ultra Air - although I think that can is near empty:  

 

360.9   367   335.6   342.4   227   244.4   257.3
378.7   43.7   217.3   243.6   226.8   71.1   255.4
117   363.7   180.4   237.8   82.3   105.4   256.4
374.5   359.7   249   263.8   258.4   220.3   254.8
381.1   250.8   230.9   233.9   289.3   128   64.3
326   319.1   309.6   231.8   279.2   198.2   251.6
296.1   350.4   322.5   230.3   286.2   273.5   253.7
368.2   260.6   322.5   161.1   279.9   170.9   212.1
324.2   356.1   319.1   241.4   279.2   47.6   250.5
367.6   342.8   317.4   242.2   286.2   7   270.4
365.9   339   312   234.6   279.9   270.1   265.9
368.7   342.3   311.2   232.3   281.8   273.8   262.6
160.3   184.4   309.6   252.4   279.5   251.6   241.7
338.5   337.5   306.4   236.2   277.3   265.6   260.1
265.3   364.2   303.3   239.7   278.6   233.4   260.4
356.6   205.5   301.4   231.8   278.9   266.2   258.7
308.8   152.8   297.6   237.6   255.9   267.6   256.7
353   109.2   395.4   164.4   272.2   267   255.6
354   164.5   293.2   231.6   278.9   266.7   216.98
355.1   176.8   287.3   231.6   277.9   267.3   257.3
346.3   274.9   299.1   234.8   276   265.3   257.3
347.3   325.6   287.6   234.1   274.4   243.4   253.7
343.3   330.1   173.7   226.8   259.8   261.2   252.4
345.3       290   189   267   264.1   250
343.3       280.5   227.2   273.8   260.9   249
        277.6   226.6   274.7   265.6   247.9
        275.3   229.87   272.2   258.9   247.2
        277.6   99.3   274.7   217.1   247.7
            55.6       46.2   246.9
                        250
                        244.1
F           F           194.7
                        248.2
                        246.9

 

Then another 7 through with Abbey 144a:

 

355.1   321.56   300.2   234.1   295.8   279.5   263.2
335.6   193.1   287.2       287.3   283.5   262.1
336.1   318.2   289.3   241.2   290.7   279.2   262.1
331   319.9   289.3   246.2   289.3   280.2   261.5
328.7   311.6   295   252.4   286.6   2894.2   261.1
68   317.8   294.3   258.4   287.3   280.8   256.7
323.4   311.6   291.1   263.2   289.3   282.2   261.8
327.4   322.9   291.8   262.4   285.5   276.3   253.2
322.5   314.4   290.7   263.8   285.9   281.2   252.1
322.5   314.4   291.5   265.6   287.3   281.5   232.1
321.2   310.8   287.9   265.3   285.5   278.6   251.1
319.9   304.4   290.4   269.1   287.3   279.2   249.8
283.5   304.8   290   263.8   290   276.9   255.6
285.2   310.8   267.9   266.4   284.5   273.1   302.1
314.9   305.2   289.3   266.4   284.5   252.9   245.6
314.4       289.7   267   283.2   272.2   244.9
313.2       289.3   270.7   284.2   271.3   181.4
312.4       289   270.1   284.2   270.1   244.4
310.4       288.3   269.8   285.5   271.9   242.4
307.6       285.5   272.2   282.5   264.4    
308       290   271.9   279.9   267.3    
306       288.6   275   283.8   266.2    
305.6       287.3   273   279.5   270.7    
310.4       268.5   0.1   280.2   269.5    
306.4       286.6   273.8   279.5   267    
302.5       284.9   275.7   278.9   266.4    
304.4       285.5   277.6   284.2   263.5    
302.1       287.9   271.9   278.6   241.9    
        286.6   283.2   281.2   275    
        285.2   282.8   296.5   271.3    
        287.3   279.2   285.2   263.2    
F                        
        F   F           E
                         

Abbey 144a:

 

                     

 

 

 

The F denotes the load that was refilled with gas.

 

There are some anomalies, which I am hoping was down to the fact there were a few pre-fired BBs in that bottle.

 

 

 

More worryingly, a metal pin has fallen out of my of the pews - it could be a Glock, the 1911, the Auto 9 or the new G36.  

 

 

Sad times. 😪

Link to comment
Share on other sites
CrackCommandoUnit1972 Proficient

CrackCommandoUnit1972

Posted
Posted

Those are some whacky numbers there.

 

Sometimes, with Gbbr's it not about the consistancy, it's the experience.

 

Post a pic of the pin, some airsoft super tech might be able to ID it for you. Although you may find out when one of your pews falls to bits mid game :(

Link to comment
Share on other sites
Dan Robinson Veteran

Dan Robinson

Posted
  • Author
Posted

Well, it ended up being two parts lose....

 

Took the front grop off and this little plate came out too.

 

Can't see where either came from (limke I said, the pin could be from another pew).

 

Also found the castellated nut that holds the outer barrel in place was totally undone. 

 

 

Can't beat airsoft QC 🤣

Compress_20230825_213041_1690.jpg

Link to comment
Share on other sites
CrackCommandoUnit1972 Proficient

CrackCommandoUnit1972

Posted
Posted

I have just stripped mine down and cant see anything that resembles the retangular peice you have found. And there is nothing in that diagramme that resembles that bit either

 

The only pin from under the hand guard I can see it the one that holds the mock gas block in place.

 

This website seems to stock every bit you need for you rifle.

 

https://www.kyairsoft.com/parts/we-rifles-gbbr/999-series.html

Link to comment
Share on other sites
SheriffHD Rising Star

SheriffHD

Posted
Posted

That peice is from the mock gas cylinder that's at the front I do believe. Should feel a slight spring tension when you slide it in.

 

I've had mine 6 months now, on mine I've developed an issue with it shooting fully auto on semi but the plastic tip on the charging handle has stood up fine.

 

 

Link to comment
Share on other sites
Dan Robinson Veteran

Dan Robinson

Posted
  • Author
Posted
5 hours ago, CrackCommandoUnit1972 said:

The only pin from under the hand guard I can see it the one that holds the mock gas block in place

 

I couldn't see any missing pins, and closer inspection shows that this pin is probably older than this pew.  Time to take the pistols apart again methinks

 

4 hours ago, SheriffHD said:

That peice is from the mock gas cylinder that's at the front I do believe. Should feel a slight spring tension when you slide it in

 

Which bit dude?   I can feel the spring in the gas tube.

Link to comment
Share on other sites
Dan Robinson Veteran

Dan Robinson

Posted
  • Author
Posted
10 minutes ago, mightyjebus said:

lower receiver gearbox pin from an M4

 

 

I'm pretty sure it isn't that (i havent takebone apart for a couple of weeks, but good call on the other two.  Should be testing out those glasses Monday 👍

Link to comment
Share on other sites
  • 10 months later...
MirrorMan Apprentice

MirrorMan

Posted
Posted
On 23/08/2023 at 21:13, Dan Robinson said:

 

Hopefully it doesn't turn into this club. 

I'm joining like it or not 😂

Link to comment
Share on other sites
gavinkempsell Grand Master

gavinkempsell

Posted
Posted

As above it looks like #52 in this diagram, I'll assume airsoft isn't your priority just now, quessing you're spending Hong Kong Dollars just now but here's the diagram...

 

https://www.kyairsoft.com/999-46-g39-flash-hider-gbbr.html

Link to comment
Share on other sites
  • 4 weeks later...
Dan Robinson Veteran

Dan Robinson

Posted
  • Author
Posted

Harro! 

 

Sorry for silent running recently.... its been crazy with work,  plus I got covid, plus the boy is back for the summer so I've been trying to spend time with him. 

 

So waiting to hear back from Bespoke....see other thread 🤣

 

Link to comment
Share on other sites
RostokMcSpoons Grand Master

RostokMcSpoons

Posted
Posted

Hi ho, you going quiet has coincided with me being on hiatus on medical advice... Which I've now decided to ignore. 

 

So hopefully see you on the battlefield at Spec Ops soon 😎.   I might be going Sunday morning.   Depends on whether I'm still alive, my wife might notice a guitar getting delivered on Saturday, and then....

💩💩💩

Link to comment
Share on other sites
Dan Robinson Veteran

Dan Robinson

Posted
  • Author
Posted
28 minutes ago, RostokMcSpoons said:

Hi ho, you going quiet has coincided with me being on hiatus on medical advice... Which I've now decided to ignore. 

 

So hopefully see you on the battlefield at Spec Ops soon 😎.   I might be going Sunday morning.   Depends on whether I'm still alive, my wife might notice a guitar getting delivered on Saturday, and then....

💩💩💩

We're at AWA this weekend,  Spec Ops next week with a plus 1

Link to comment
Share on other sites
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...