Jump to content

Charging Batteries


SteamPunkSultan
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi All,

Been a long time since I have been to a site, but I have recently bought myself some batteries and a charger.

The charger has a Charge Rate Selection which can be 0.5, 1, 2, 3.5 and 5A. Which is the best option for charging?

 

Thanks!

SPS

Link to comment
Share on other sites

Very much depends on what battery you have, both in terms of chemistry and size. 

 

The setting equates to how much you're jamming into the battery at a time.  With NIMH its not so critical.  With a lipo then it's vital not to over do it. The higher the number the faster the charge speed which can cause a fire if not careful. 

 

If you're charging lipo's then send the charger back and get a smart charger that you can select the exact battery type and let it sort things out. 

 

It will also help you track battery health by monitoring the amount of juice going in and out..... Lipo's need to be stored at a certain voltage too, which means getting them to that level if you're storing for more than a few days. 

Edited by Dan Robinson
Link to comment
Share on other sites

Hi Dan,

Thanks for the reply. Its all NIMH batteries. Based on what you have recommended I think middle of the road at 2A would be a good place to be.

 

Thanks again!

Link to comment
Share on other sites

  • Supporters

Good rule of thumb is try to avoid charging more than 1c.

 

Take the capacity of the battery eg: 1600mah, divide by 1000 gives you 1c or 1.6 amps.

 

If in doubt slower is the safer option to go for, given the usage of airsoft there shouldnt be any need to go fast just charge up before game day and if you run out mid-day then buy more batteries.

Link to comment
Share on other sites

  • Supporters
9 hours ago, SteamPunkSultan said:

Its all NIMH batteries

 

Is there a particular reason that you went with NIMH?  I mean, they work, but it's old technology.  It's also surprisingly tricky for chargers to deal with since they don't know what voltage they're charging to, they have to look for the battery resistance to spike / the current to drop off.

 

I know that lithium cells can get a little explodey, but the performance advantages outweigh that for me.

Link to comment
Share on other sites

I should have asked before I splurged. I will be looking at Lithium in the near future though.

Is there specific chargers etc. required for LiPo batteries? Dischargers etc.?

 

Thanks,

Rob

Link to comment
Share on other sites

  • Supporters

Full disclosure, I made that mistake too, having bought a CYMA with a nimh battery, then gone deeper down that hole before climbing out.  It's not a disaster, some folk still swear by them for their non-exploding properties. ;) 

 

And yes, lithium charges differently from nimh, so it's likely you'll need a different charger unless you current one has a lithium mode.  Any remotely decent charger will also balance-charge lithium batteries to keep the cells at the same voltage.

 

We're currently liking the SkyRC S65 charger.

Link to comment
Share on other sites

Its certainly worth getting a good charger for Li-Po batteries. (as Roger said, 'SkyRC S65' is recommended)

An intelligent charger will properly charge to keep the batteries in best condition and reduce the risk of fire.

 

Link to comment
Share on other sites

A Smart charger is a must for lithium batteries if only to get them to the correct storage charge. 

 

My son's m16 has a chunky NIMH battery in it and the performance is pretty damn impressive for a budget pew pew. 

 

Good thing about NIMH is it's very hard to overcharge and damage in comparison to lithium. You also dont get memory effect problems. They are twice the size though. 

 

I still have a Sky B6 smart charger which does everything i need. But the RC65 is the same price and I suppose easier to use, can't justify the cost of changing for the sake of it. 

Link to comment
Share on other sites

I was given the advice above, got some 7.4 LiPos and the SkyRC S65, and it worked out great. The Sky charger is a good bit of kit (though the instruction manual kind of assumes you know everything, recommend watching some YT videos) and it will also cycle charge NiMH batteries meaning they will be better off too. 

I kept hold of my NiMHs as backup, can't hurt.

Edited by Floperator
Sp
Link to comment
Share on other sites

1 hour ago, Dan Robinson said:

...You also dont get memory effect problems.

Yeah, I hope you're not talking about NiMh because its completely the opposite.

NiMh DOES have memory effect so they should be fully discharged before charging to full.

Li-Po Does NOT have memory effect so they can be charged from any level to full and its actually better to re-charge them before they get too low.

 

The SkyRC B6 is also a good charger if its a genuine one.  If not then be very wary and charge in a Li-Po bag.

 

Edited by EDcase
Link to comment
Share on other sites

  • Supporters
1 minute ago, EDcase said:

NiMh DOES have memory effect so they should be fully discharged before charging to full.

 

Pretty sure i still have a discharger lying around somewhere from the bad old days......

Link to comment
Share on other sites

17 minutes ago, EDcase said:

Yeah, I hope you're not talking about NiMh because its completely the opposite.

NiMh DOES have memory effect so they should be fully discharged before charging to full.

Li-Po Does NOT have memory effect so they can be charged from any level to full and its actually better to re-charge them before they get too low.

 

The SkyRC B6 is also a good charger if its a genuine one.  If not then be very wary and charge in a Li-Po bag.

 

 

Old ones did, but new ones I was told, do not..... Had a quick Google to check and found this:

 

Quote

Q: What does NiMH stand for?

A: The material is Nickel Metal Hydride (NiMH) which has many advantages over other battery construction materials.

Q: What is meant by battery memory?

A: Older generation and batteries with other chemical make-up were subject to a memory effect. This is when a battery must be fully drained before recharge or their capacity is reduced. The New Generation of NIMH batteries do not develop a memory effect and can be recharged at anytime during usage cycle. When uncertain about battery charge level or condition, recharge it

 

Happy to be corrected though.  Everyday is a school day. 

Link to comment
Share on other sites

  • Supporters

Not entirely sure how much i'd trust a source that includes a sales link.

 

But if there's been a reformulation of the chemistry of nimh cells to eliminate memory this is the first i've heard of it, surprising companies haven't at least re-named it to avoid the stigma of the old cells.

Link to comment
Share on other sites

My original info came from a discussion I had with a power tool company when we were re-tooling and deciding to either move to the new lithium ion range of toys or stick with the nimh and just get new batteries. 

 

I suppose the guy could have been trying to shift old inventory, but we decided to move over anyway.  Some of those lithium batteries are only now just starting to give up, and they have been abused in all sorts of ways; including being used as percussive maintenance implements. 

 

Still have a few nimh batteries powering some old tools (the ones we didn't use often enough to justify buying new versions of) that must be 16 years old now and still working.  The NiCad ones are guffed though.  Finally threw them out last year. 

 

 

As a side note, there are a lot of snide copies online, and it's a very mixed bag when it comes to capacity and runtime.  Sometimes a lot worse than oem.  Sometimes the same or betterer. 

Edited by Dan Robinson
Added info
Link to comment
Share on other sites

  • Supporters

Hmm, as you say could be trying to shift old stock.

 

Curious if there is truth behind this, if only as academic interest.

 

Certainly all of my experiences with nimh are years old at this point given i've never had call to use them since the lipo takeover.

 

Ofc there are valid uses for nimh (even in its bad old form) in airsoft, when dealing with rental guns. Cant trust rentals to understand the gravity of not mashing the trigger until the gun stops cycling.

Link to comment
Share on other sites

My nimh experiences are now limited to a few jigswaws, and an impact driver (now replaced with a lithium tool) and the boy's M16. 

 

Battery chemistry is an interesting topic, but especially now cars and houses are going to be the norm for using them. My car battery was cooked today after a run to Birmingham and back. 

 

I think some of the older chemistries will see a revival with home batteries, partly because of safety. We live in interesting times. 

Link to comment
Share on other sites

The issue would be putting too many volts into a gun that doesn't have the guts that can take the extra oomph. 

 

Any aeg will work on any chemistry as long as the volts go with the gearbox. 

Edited by Dan Robinson
Link to comment
Share on other sites

10 minutes ago, SteamPunkSultan said:

Is there a specific requirement to use LiPo batteries in specific AEGs, or will either work? Forgive my density on such matters!

 

Any battery which can supply the demands the gearbox should work in theory, there are some buts though. Some oem cheap out on parts and though they should run fine on 11.1v they don't and they go fizz pop and let out the magic smoke.

The other thing is discharge, if a gun doesn't have low voltage cut off then it will continue to draw and lipos don't take kindly to being drawn excessively low, best case is that it'll just wreck the cell, worst is it goes full fire pop.

I prefer lipos. With care and understanding they have great output for the physical size and a good battery and a good charger goes a long way.

Link to comment
Share on other sites

  • Supporters
49 minutes ago, SteamPunkSultan said:

Is there a specific requirement to use LiPo batteries in specific AEGs, or will either work? Forgive my density on such matters!

 

Almost anything will take almost anything.

 

Some exceptions are early G&G ETU models which could give low battery issues when running 7.4V lipos, and the risk of getting either double shots on semi, or premature engagement on auto, running 11.1V.

 

There's nothing special about lithium vs nimh though, an electron is an electron, and you don't need a "lipo ready" gun, or a mosfet, or any particular gun to run 7.4V lithiums.

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...