Supporters Lozart Posted June 17, 2019 Supporters Share Posted June 17, 2019 2 minutes ago, Northeast Airsoft POD said: How do you shim or i this just a youtube task? To be fair, it's easier to understand if you watch a YT vid. Link to comment Share on other sites More sharing options...
Northeast Airsoft POD Posted June 17, 2019 Author Share Posted June 17, 2019 Ive seen alot of you mention a gate titan? what do you mean by this, i found one but it is really expensive. Thought i found it here: https://www.amazon.co.uk/GATE8-Gate-Titan-Advanced-Wired/dp/B07KPLSPXW/ref=sr_1_15?hvadid=80814136423957&hvbmt=be&hvdev=c&hvqmt=e&keywords=gate+titan&qid=1560779892&s=gateway&sr=8-15 Is there any cheaper alternatives? if not can you link me to what im should be looking at 8 minutes ago, Lozart said: To be fair, it's easier to understand if you watch a YT vid. right, how do you take this part out of the lower receiver as i got stuck i thought is was the trigger causing the issue but not to sure ? Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 17, 2019 Supporters Share Posted June 17, 2019 7 minutes ago, Northeast Airsoft POD said: Ive seen alot of you mention a gate titan? what do you mean by this, i found one but it is really expensive. Thought i found it here: https://www.amazon.co.uk/GATE8-Gate-Titan-Advanced-Wired/dp/B07KPLSPXW/ref=sr_1_15?hvadid=80814136423957&hvbmt=be&hvdev=c&hvqmt=e&keywords=gate+titan&qid=1560779892&s=gateway&sr=8-15 Is there any cheaper alternatives? if not can you link me to what im should be looking at right, how do you take this part out of the lower receiver as i got stuck i thought is was the trigger causing the issue but not to sure ? If you've taken out the two main body pins, chances are you haven't taken out the pin that goes across the receiver just above the trigger. This is a pretty good breakdown video: Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted June 17, 2019 Supporters Share Posted June 17, 2019 23 minutes ago, Northeast Airsoft POD said: How do you shim or i this just a youtube task? Looking on YouTube will show you the basics. Link to comment Share on other sites More sharing options...
Northeast Airsoft POD Posted June 17, 2019 Author Share Posted June 17, 2019 Where do you buy the shims from any links of preferred sites or can i buy them locally at depot stores Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 17, 2019 Supporters Share Posted June 17, 2019 16 minutes ago, Northeast Airsoft POD said: Where do you buy the shims from any links of preferred sites or can i buy them locally at depot stores https://www.ak2m4.co.uk/internal-parts/bushings-shims/rocket-shims-v2 Link to comment Share on other sites More sharing options...
Northeast Airsoft POD Posted June 17, 2019 Author Share Posted June 17, 2019 13 minutes ago, Lozart said: https://www.ak2m4.co.uk/internal-parts/bushings-shims/rocket-shims-v2 so @Lozart the motors im am looking at and have been recommended are the SHS (RA) HIGH TORQUE MOTOR 16TPA (LONG) asg ultimate basic motor any others i should be contemplating ? I have the Shims and M110 coming sometime this week Still unsure on the Gate titan and the gear ratio. Do i need to buy new gears if so what do you guys recommend. Hop up upgrade as well? any suggestion of parts and i think im almost there 5 hours ago, ImTriggerHappy said: A proper tech at least i am trying dude, i have to learn somehow Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 17, 2019 Supporters Share Posted June 17, 2019 1 minute ago, Northeast Airsoft POD said: so @Lozart the motors im am looking at and have been recommended are the SHS (RA) HIGH TORQUE MOTOR 16TPA (LONG) asg ultimate basic motor any others i should be contemplating ? I have the Shims and M110 coming sometime this week Still unsure on the Gate titan and the gear ratio. Do i need to buy new gears if so what do you guys recommend. Hop up upgrade as well? any suggestion of parts and i think im almost there Don't change any more than you need to. Gate Titan https://www.bullseyecountrysport.co.uk/gate-titan-v2-advanced-set-airsoft-trigger-mosfet-lipo-management-fire-selector-23039-p.asp (that's the advanced set that lets you program using your phone over USB which is a lot easier to do than relying on a laptop when you get to site) Don't bother with the M110 spring (but I guess you've already bought it so...) Think about the things that your gun doesn't do that you want it to. If you have decent range and accuracy, leave the hop and inner barrel alone. Stick with the standard gears for now until you break them, high rate of fire isn't everything and changing to a faster gear ratio (like 13:1 for example) will potentially lead to other issues like pre-engagement or feeding issues. If you have a good airseal then leave the cylinder/piston/nozzle assembly alone too. Link to comment Share on other sites More sharing options...
Northeast Airsoft POD Posted June 17, 2019 Author Share Posted June 17, 2019 7 minutes ago, Lozart said: Don't change any more than you need to. Gate Titan https://www.bullseyecountrysport.co.uk/gate-titan-v2-advanced-set-airsoft-trigger-mosfet-lipo-management-fire-selector-23039-p.asp (that's the advanced set that lets you program using your phone over USB which is a lot easier to do than relying on a laptop when you get to site) Don't bother with the M110 spring (but I guess you've already bought it so...) Think about the things that your gun doesn't do that you want it to. If you have decent range and accuracy, leave the hop and inner barrel alone. Stick with the standard gears for now until you break them, high rate of fire isn't everything and changing to a faster gear ratio (like 13:1 for example) will potentially lead to other issues like pre-engagement or feeding issues. If you have a good airseal then leave the cylinder/piston/nozzle assembly alone too. so what am i paying for when i spend that much just the abilty of using changing wireless Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 17, 2019 Supporters Share Posted June 17, 2019 2 minutes ago, Northeast Airsoft POD said: so what am i paying for when i spend that much just the abilty of using changing wireless Have a read https://gatee.eu/titan There is a Basic version but you won't get the same functionality. Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted June 17, 2019 Supporters Share Posted June 17, 2019 13 minutes ago, Northeast Airsoft POD said: so what am i paying for when i spend that much just the abilty of using changing wireless No you get the advanced firmware which is worth it. It is not wireless but a simple cable connection. With the precock and trigger equalizer you will an instant trigger response. Link to comment Share on other sites More sharing options...
Northeast Airsoft POD Posted June 17, 2019 Author Share Posted June 17, 2019 I agree with some of you guys recarding the on sites gun techs, you guys know anybody that will do this do this for me withing in 50miles of shildon in northeast that i can send with parts to fix and build i dont want to spend 3O on the on site tech but i will see what comes back so i will keep the gears i have,shim my gears which looks pretty simple, purchase the gate titan, Any particular motor i should get to go with the titan? the only 2 ive seen mentioned are Asg ultimate cnc 30k motor SHS (RA) HIGH TORQUE MOTOR 16TPA (LONG) Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted June 17, 2019 Supporters Share Posted June 17, 2019 9 minutes ago, Northeast Airsoft POD said: I agree with some of you guys recarding the on sites gun techs, you guys know anybody that will do this do this for me withing in 50miles of shildon in northeast that i can send with parts to fix and build i dont want to spend 3O on the on site tech but i will see what comes back so i will keep the gears i have,shim my gears which looks pretty simple, purchase the gate titan, Any particular motor i should get to go with the titan? the only 2 ive seen mentioned are Asg ultimate cnc 30k motor SHS (RA) HIGH TORQUE MOTOR 16TPA (LONG) As long as the motor is not running hot just use the stock one with the titan Link to comment Share on other sites More sharing options...
Northeast Airsoft POD Posted June 17, 2019 Author Share Posted June 17, 2019 29 minutes ago, ImTriggerHappy said: As long as the motor is not running hot just use the stock one with the titan will i still get the increase rof and trigger response with stock motor? Link to comment Share on other sites More sharing options...
Supporters Lozart Posted June 17, 2019 Supporters Share Posted June 17, 2019 14 minutes ago, Northeast Airsoft POD said: will i still get the increase rof and trigger response with stock motor? Trigger response will increase when you fit the Titan. Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted June 17, 2019 Supporters Share Posted June 17, 2019 1 hour ago, Northeast Airsoft POD said: will i still get the increase rof and trigger response with stock motor? As Loz said with the Titan you will get instant trigger response. Rof you will get a really small increase but barely noticeable. Link to comment Share on other sites More sharing options...
Northeast Airsoft POD Posted June 17, 2019 Author Share Posted June 17, 2019 33 minutes ago, ImTriggerHappy said: As Loz said with the Titan you will get instant trigger response. Rof you will get a really small increase but barely noticeable. so what would i higher torque motor or a high speed motor and if i were to get one what would you recommend, is it just how efficient its it with the power from the battery Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted June 17, 2019 Supporters Share Posted June 17, 2019 Mate you’ve made it blatantly obvious you haven’t a scooby about anything to do with the technical side of airsofting (nothing wrong with that I’m a relative tech dunce my self) and plenty of others are just as clueless and have played for yrs quite happily sans the tech side of it . So why are you still not listening to the VERY tech savvy guys on here who are telling you that you’re at the FPS you want already AND how you could possibly squeeze a bit more response out of you Gun? 😳 😂😂😂 Link to comment Share on other sites More sharing options...
Northeast Airsoft POD Posted June 17, 2019 Author Share Posted June 17, 2019 20 minutes ago, Druid799 said: Mate you’ve made it blatantly obvious you haven’t a scooby about anything to do with the technical side of airsofting (nothing wrong with that I’m a relative tech dunce my self) and plenty of others are just as clueless and have played for yrs quite happily sans the tech side of it . So why are you still not listening to the VERY tech savvy guys on here who are telling you that you’re at the FPS you want already AND how you could possibly squeeze a bit more response out of you Gun? 😳 😂😂😂 To Be fair i agree with you totally, its i want to be able to have a gun to show off. I know its sounds shit but everyone at the sites talks about how they shooting over these limits ,with 30rps. On the range asking people if they want a go. And im their with slow rate of fire and small range, You not what i mean? Its not that im not listening i have a word document writing all these key stuff down to do more research on. I hate not be ale to do stuff especially giving some one £25 to change a spring. I appreciate all these comments, Tbh i surprised how many people have replied especially how quickly for that im grateful. I just want to have a gun that can be efficent and as perfect as possible. I know its far fetch but thats it. I enjoy airsoft been playing for 5+years been through 3 guns and want to step up a bit to next "level". I plan to upgrade everything i can to make it as efficient as possible I have bought my : new spring M110 The rocket shims things I plan to buy the Gate Titan V2 Probaly in the future look at the hop up and motor And i had no idea about this before 12 so i call that a win! GG guys Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted June 17, 2019 Supporters Share Posted June 17, 2019 11 minutes ago, Northeast Airsoft POD said: To Be fair i agree with you totally, its i want to be able to have a gun to show off. I know its sounds shit but everyone at the sites talks about how they shooting over these limits ,with 30rps. On the range asking people if they want a go. And im their with slow rate of fire and small range, You not what i mean? Its not that im not listening i have a word document writing all these key stuff down to do more research on. I hate not be ale to do stuff especially giving some one £25 to change a spring. I appreciate all these comments, Tbh i surprised how many people have replied especially how quickly for that im grateful. I just want to have a gun that can be efficent and as perfect as possible. I know its far fetch but thats it. I enjoy airsoft been playing for 5+years been through 3 guns and want to step up a bit to next "level". I plan to upgrade everything i can to make it as efficient as possible I have bought my : new spring M110 The rocket shims things I plan to buy the Gate Titan V2 Probaly in the future look at the hop up and motor And i had no idea about this before 12 so i call that a win! GG guys Half of the people talk shit the other half paid someone to do it and 90% of those will have their gun fail very quickly as most techs are frankly shite. You can build a high rof, fast response, super accurate and very reliable AEG but it costs and if you want it to be really special it really costs. Most builds I do for people are £1000+ and even that only buys very good not special. If you want special I might be selling my SIG 552, you might even get change if your kidney is in real good condition. Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted June 17, 2019 Supporters Share Posted June 17, 2019 2 hours ago, Northeast Airsoft POD said: To Be fair i agree with you totally, its i want to be able to have a gun to show off. I know its sounds shit but everyone at the sites talks about how they shooting over these limits ,with 30rps. On the range asking people if they want a go. And im their with slow rate of fire and small range, You not what i mean? Its not that im not listening i have a word document writing all these key stuff down to do more research on. I hate not be ale to do stuff especially giving some one £25 to change a spring. I appreciate all these comments, Tbh i surprised how many people have replied especially how quickly for that im grateful. I just want to have a gun that can be efficent and as perfect as possible. I know its far fetch but thats it. I enjoy airsoft been playing for 5+years been through 3 guns and want to step up a bit to next "level". I plan to upgrade everything i can to make it as efficient as possible I have bought my : new spring M110 The rocket shims things I plan to buy the Gate Titan V2 Probaly in the future look at the hop up and motor And i had no idea about this before 12 so i call that a win! GG guys 30rps ? 😱 Whoopi f**king do ! who gives a shit ! 👍 Don’t get sucked it to all that crap mate , as trigger said most of the guys gobing off about there amazing up-graded gun will be re-building (OR more than likely paying someone else to do it for them) there guns time and time again . It’s all very well tweek’ing your gun till it’s the ultimate gun on the field but most guns just can’t take it for long before they’ll implode . Your guns doing 12or13rps ? Only takes 1 to get a kill . there guns trigger reacts 0.1150 of a sec faster than yours ? Simple be faster on the trigger than they are next time your at a gameday you watch out for the really good players and watch them shooting , put money on it you won’t see them firing at 30rps , It’ll all be single shot AND they’ll be dominating there area as well . Anyone takes the piss out of your gun ? Simply answer them like the hound from GoT , Works for me ! 🖕 🤣🤣🤣 Link to comment Share on other sites More sharing options...
Northeast Airsoft POD Posted June 17, 2019 Author Share Posted June 17, 2019 21 minutes ago, Druid799 said: 30rps ? 😱 Whoopi f**king do ! who gives a shit ! 👍 Don’t get sucked it to all that crap mate , as trigger said most of the guys gobing off about there amazing up-graded gun will be re-building (OR more than likely paying someone else to do it for them) there guns time and time again . It’s all very well tweek’ing your gun till it’s the ultimate gun on the field but most guns just can’t take it for long before they’ll implode . Your guns doing 12or13rps ? Only takes 1 to get a kill . there guns trigger reacts 0.1150 of a sec faster than yours ? Simple be faster on the trigger than they are next time your at a gameday you watch out for the really good players and watch them shooting , put money on it you won’t see them firing at 30rps , It’ll all be single shot AND they’ll be dominating there area as well . Anyone takes the piss out of your gun ? Simply answer them like the hound from GoT , Works for me ! 🖕 🤣🤣🤣 Class that, its a shame really that what happens but hope the titan does its jobs and the shimming thanks for you help guys appreciate, i will delete this post or can someone delete if i cant i will probs make a new one in a weeks time when all my gears arrived and my gun dont shoot no more haha GG Link to comment Share on other sites More sharing options...
sonofsammo Posted June 18, 2019 Share Posted June 18, 2019 @Northeast Airsoft POD - If you're looking for a tech near you, are you anywhere near TS179LT ? That's where BZ Tactical are based and most of our team use their tech. Costs nothing to ask em 😉 Link to comment Share on other sites More sharing options...
Steveocee Posted June 18, 2019 Share Posted June 18, 2019 13 hours ago, Northeast Airsoft POD said: To Be fair i agree with you totally, its i want to be able to have a gun to show off. I know its sounds shit but everyone at the sites talks about how they shooting over these limits ,with 30rps. On the range asking people if they want a go. And im their with slow rate of fire and small range, You not what i mean? Its not that im not listening i have a word document writing all these key stuff down to do more research on. I hate not be ale to do stuff especially giving some one £25 to change a spring. I appreciate all these comments, Tbh i surprised how many people have replied especially how quickly for that im grateful. I just want to have a gun that can be efficent and as perfect as possible. I know its far fetch but thats it. I enjoy airsoft been playing for 5+years been through 3 guns and want to step up a bit to next "level". I think you need to find yourself a new site. One where people shoot at the limits and it isn't a constant "mine is better than yours" mentality. You'll likely have a lot more fun and won't find the need for mooooaaaarrrrr everything. Do you need ROF? Honestly if you can't hit someone within 5 shots on semi, move to a better position. It's cost free and won't mess up your gun in the process. Link to comment Share on other sites More sharing options...
EDcase Posted June 18, 2019 Share Posted June 18, 2019 Its unbelievably satisfying sneaking up on the geared-up players and wiping them out with my crappy MP5 because they've got huge rifles that stick out a mile from the corner they're hiding behind. Top spec guns don't mean shit if they don't know how to play tactically. Though from your description I expect most of em don't take their hits anyway. Like Steveocee said, find a better site.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.