Fissure Posted January 14, 2019 Share Posted January 14, 2019 Oh I see, in that case I would go with the stock return spring and the RA-Tech NPAS ! With that one you can adjust the length of the valve itself quite a bit and go really low with the fps if you wish. Link to comment Share on other sites More sharing options...
Guest Posted January 14, 2019 Share Posted January 14, 2019 What a lot of lovely info. I fitted a new nub to the MTR tonight😎 Link to comment Share on other sites More sharing options...
Jimmeh Posted January 14, 2019 Share Posted January 14, 2019 1 hour ago, Fissure said: Oh I see, in that case I would go with the stock return spring and the RA-Tech NPAS ! With that one you can adjust the length of the valve itself quite a bit and go really low with the fps if you wish. Didn’t work for me. It became very unstable and there was a point where it just dropped off a cliff! Link to comment Share on other sites More sharing options...
Fissure Posted January 14, 2019 Share Posted January 14, 2019 14 minutes ago, Jimmeh said: Didn’t work for me. It became very unstable and there was a point where it just dropped off a cliff! Oh so you have the NPAS already, strange! I did try it with a 370mm aps-x barrel and tried to tune it into the cqb limits here (328fps with 0.2bbs) and want to remember it working out pretty well. But if you already are running stock internals and shooting pretty hot i think you would have to try out either a shorther barrel or one with a bigger bore like 6.04 or even higher. Link to comment Share on other sites More sharing options...
Jacket Posted January 15, 2019 Share Posted January 15, 2019 Is there any demand for a standard CQBR front end? What sort of price should I be looking for? Link to comment Share on other sites More sharing options...
Jimmeh Posted January 16, 2019 Share Posted January 16, 2019 16 hours ago, Jacket said: Is there any demand for a standard CQBR front end? What sort of price should I be looking for? Assume you mean outer barrel, rail and associated bits but not an upper receiver? Link to comment Share on other sites More sharing options...
Jacket Posted January 16, 2019 Share Posted January 16, 2019 Yeah thinking of changing front end but keeping upper receiver Link to comment Share on other sites More sharing options...
Jimmeh Posted January 16, 2019 Share Posted January 16, 2019 Just now, Jacket said: Yeah thinking of changing front end but keeping upper receiver You may find someone who wants to convert to a CQBR occasionally but without an upper receiver it will be a tough sell. Though I do know someone who might be interested in the shorter outer barrel. Link to comment Share on other sites More sharing options...
Supporters Shizbazki Posted January 22, 2019 Supporters Share Posted January 22, 2019 So I may be in receipt of a TM MWS soon (can't wait) and plan to modify some of the external parts when it arrives. So i wanted to know if the following can be changed? Stock: I want to change the stock to a real steel Magpul MOE SL stock. Has anyone fitted one to their MWS? which did you need to use, the civilian or Mil-Spec size and was it a tight fit? Pistol grip: I want to also change this to a Magpul MOE pistol grip too, again was it a simple fit, does the MWS use only 1 bolt to hold the grip in place. If it did need a little modding what did you have to do? I plan to leave the rest of the internals stock as i find TM works best for me if i dont touch the innards especially the hop but what, if anything do you guys often change first? Link to comment Share on other sites More sharing options...
Wo1f Posted January 22, 2019 Author Share Posted January 22, 2019 4 minutes ago, Shizbazki said: So I may be in receipt of a TM MWS soon (can't wait) and plan to modify some of the external parts when it arrives. So i wanted to know if the following can be changed? Stock: I want to change the stock to a real steel Magpul MOE SL stock. Has anyone fitted one to their MWS? which did you need to use, the civilian or Mil-Spec size and was it a tight fit? Pistol grip: I want to also change this to a Magpul MOE pistol grip too, again was it a simple fit, does the MWS use only 1 bolt to hold the grip in place. If it did need a little modding what did you have to do? I plan to leave the rest of the internals stock as i find TM works best for me if i dont touch the innards especially the hop but what, if anything do you guys often change first? I've got an Angrygun buffer tube on mine, but i believe the standard one is milspec too. grip is RS spec and will bolt straight on with no modification. at least to the few ive tried. The only external issue is most rails need an adapter ring. On 14/01/2019 at 22:25, rocketdogbert said: What a lot of lovely info. I fitted a new nub to the MTR tonight😎 whats the verdict on the nub? Link to comment Share on other sites More sharing options...
Supporters Shizbazki Posted January 23, 2019 Supporters Share Posted January 23, 2019 34 minutes ago, Wo1f said: I've got an Angrygun buffer tube on mine, but i believe the standard one is milspec too. grip is RS spec and will bolt straight on with no modification. at least to the few ive tried. The only external issue is most rails need an adapter ring. whats the verdict on the nub? Cheers mate, may my wallet say its prayers Wo1f 1 Link to comment Share on other sites More sharing options...
Guest Posted January 23, 2019 Share Posted January 23, 2019 7 hours ago, Wo1f said: whats the verdict on the nub? It overhops 0.25’s, as expected, haven’t done much with it other than that. @sonofsammo has one in his, 0.36’s take the range to around 70-80m Link to comment Share on other sites More sharing options...
Guest Posted January 23, 2019 Share Posted January 23, 2019 My quest to fit the AW 300 round drum mag to the MTR took a different tack tonight. I could not get the TM mag insert (at the top) to reliably be gas tight in the AW adapter. So, I took the plunge, and cut an MTR mag in half..... ...along with cutting the top top off the AW adapter, and machined the two to fit together... This will ensure a gas tight seal once they are permanently bonded and screwed 😎 Link to comment Share on other sites More sharing options...
xB0SHx Posted January 23, 2019 Share Posted January 23, 2019 5 minutes ago, rocketdogbert said: My quest to fit the AW 300 round drum mag to the MTR took a different tack tonight. I could not get the TM mag insert (at the top) to reliably be gas tight in the AW adapter. So, I took the plunge, and cut an MTR mag in half..... ...along with cutting the top top off the AW adapter, and machined the two to fit together... This will ensure a gas tight seal once they are permanently bonded and screwed 😎 Bold move I like it. How will you bond it? Link to comment Share on other sites More sharing options...
Guest Posted January 23, 2019 Share Posted January 23, 2019 1 minute ago, xB0SHx said: Bold move I like it. How will you bond it? Cheers. Screws and chemical metal two part epoxy to fix them together👍🏻 Link to comment Share on other sites More sharing options...
xB0SHx Posted January 23, 2019 Share Posted January 23, 2019 4 minutes ago, rocketdogbert said: Cheers. Screws and chemical metal two part epoxy to fix them together👍🏻 I'm holding thumbs for you. I'm excited to see the end result Link to comment Share on other sites More sharing options...
Guest Posted January 24, 2019 Share Posted January 24, 2019 It needs tidying up, but in the immortal (and very recent) words of @sonofsammo SHE’S ALIIIIIIIIIVE! 68E69B4A-3721-49B0-A93B-7D8CA16D67BD.MOV Link to comment Share on other sites More sharing options...
Jimmeh Posted January 24, 2019 Share Posted January 24, 2019 How many rounds are you getting out of it? Link to comment Share on other sites More sharing options...
Guest Posted January 24, 2019 Share Posted January 24, 2019 300. That test was a 2sec squirt of green gas👍🏻 Mag takes about a third of a tin of gas Link to comment Share on other sites More sharing options...
Guest Posted January 25, 2019 Share Posted January 25, 2019 Smartened up now😎 Link to comment Share on other sites More sharing options...
Wo1f Posted January 25, 2019 Author Share Posted January 25, 2019 11 minutes ago, rocketdogbert said: Smartened up now😎 I want first refusal of you ever come to sell it 😂 Link to comment Share on other sites More sharing options...
Guest Posted January 25, 2019 Share Posted January 25, 2019 2 minutes ago, Wo1f said: I want first refusal of you ever come to sell it 😂 Cost me an MTR mag, the AW Drum mag, and lots of thought and time. Around £200 in parts! I’d consider building some more though Link to comment Share on other sites More sharing options...
Immortal Posted January 25, 2019 Share Posted January 25, 2019 I want to be a member of this elite club. Next Rif I get will be one. Wo1f 1 Link to comment Share on other sites More sharing options...
Wo1f Posted January 25, 2019 Author Share Posted January 25, 2019 Looking at the thickness of the mws shell, i wonder if you can devil hunter mod it😈 Link to comment Share on other sites More sharing options...
Guest Posted January 25, 2019 Share Posted January 25, 2019 23 minutes ago, Wo1f said: Looking at the thickness of the mws shell, i wonder if you can devil hunter mod it😈 I don’t know what that is....... Now I do........lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now