Bushmaster5.56 Posted February 11, 2017 Share Posted February 11, 2017 Hi to all. Ive discovered that soaking in Dettol overnight will totally remove unwanted krylon paint! from plastic or metal and it leaves it germ free as well lol! Link to comment Share on other sites More sharing options...
sniperslucky Posted February 11, 2017 Share Posted February 11, 2017 I'll have to try , i ended up over spraying with black Link to comment Share on other sites More sharing options...
Roundel91 Posted February 17, 2017 Share Posted February 17, 2017 can vouch for this working as well. posted a topic on this about 3 weeks ago and it worked a treat on my CM16 with fantastic results. Back to the original colour and without damaging any of the other painted on manufacturer markings either. Not sure how well it would work against other paints though (especially two tone colours) I hear fairy power spray also works very well too.l Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted February 17, 2017 Mostly Retired Moderators Share Posted February 17, 2017 I inherited some Green M4 parts that someone had kicking around. Painted with - I presume - Krylon, by Z1 - But fairy power spray isn't cutting the mustard (or the paint). Are we talking, regular, brown Dettol? Link to comment Share on other sites More sharing options...
Supporters Samurai Posted February 17, 2017 Supporters Share Posted February 17, 2017 That's the one. Link to comment Share on other sites More sharing options...
ghostwalker Posted February 17, 2017 Share Posted February 17, 2017 Can imagine it will work. As a tabletop miniature painter I regularly use either dettol or nail polish remover to strip paint from plastic and metal miniatures. A good scrub with a toothbrush after soaking will help remove any stubborn bits. Link to comment Share on other sites More sharing options...
sniperslucky Posted February 19, 2017 Share Posted February 19, 2017 Dettol, works fine but must admit it does stink the house out, lol Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted February 20, 2017 Mostly Retired Moderators Share Posted February 20, 2017 Can also confirm that soaking in dettol works a treat. After punishing my nostrils with it both evenings at the weekend. Link to comment Share on other sites More sharing options...
Roundel91 Posted February 20, 2017 Share Posted February 20, 2017 yeah it does make your house smell like a hospital ward. Mrs roundel was moanng for the best part of a week! Link to comment Share on other sites More sharing options...
Supporters Qlimax Posted February 20, 2017 Supporters Share Posted February 20, 2017 Tar and glue remover works a treat too. Soak anything you want for about 30 minutes to an hour and it just wipes away dead easy. Link to comment Share on other sites More sharing options...
sniperslucky Posted February 23, 2017 Share Posted February 23, 2017 I've used the Dettol weigh mixed reviews, Yes most of the paint has come off no problems but i don't know if because the gun needed another soaking the paint on the receiver looks a little worn now . Gonna try the tar and glue remover to get the last bits off. Ps: Does the Dettol last more than one use as it's gone cloudy ? Link to comment Share on other sites More sharing options...
Roundel91 Posted February 28, 2017 Share Posted February 28, 2017 On 23/02/2017 at 7:14 PM, sniperslucky said: I've used the Dettol weigh mixed reviews, Yes most of the paint has come off no problems but i don't know if because the gun needed another soaking the paint on the receiver looks a little worn now . Gonna try the tar and glue remover to get the last bits off. Ps: Does the Dettol last more than one use as it's gone cloudy ? should last more than one use mate. i did the whole of my gun using some poured into a Chinese container over the course of two days. was only replacing the cotton pads when they got really gammy to stop the thinned out paint spreading around. Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted March 19, 2017 Mostly Retired Moderators Share Posted March 19, 2017 Evening gentlemen! To conclude... I'm happy to confirm that dettol is a wonderful stripper of krylon. However don't do what I did and forget that you're soaking a G&G stock in the stuff. I only remembered after my missus asked me what was soaking in the tub in the cupboard under the sink. F***! I pulled it out only to find the stock had the appearance of a melted boiled sweet. Forever ruined! Now my back up G&G has a bandaged buffer tube instead of a stock! Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted March 19, 2017 Supporters Share Posted March 19, 2017 Well as it is front wired carbine you can by a nice cheapo magpul clone for under a tenner http://www.taiwangun.com/en/stocks-and-accesories/ergonomic-tactical-stock-mod-2-black?from=listing&campaign-id=19 or something like that off fleabay for about £10 or so I mean they look nice but a bitch for battery space on rear wired M4's front wired - great stock and not as wide like a crane stock better than buying another basic stock the carbine had heck could even go for a M4 folding stock - nahhhh get a tactical one I think Think we should do a notice board or something on people putting in a GF or TWG order not for the whole country but anybody local needing a couple of small bits could club together then compile a few smaller orders than pay postage or have to spend 175 Euro's to get free shipping Actually TWG think the free ship is back at 100 Euro's but don't quote me on that Well at least we know Dettol is very good at removing paint - a bit too good if you forget But might try that myself if I ever get another 2-tone come along Link to comment Share on other sites More sharing options...
Iceni Posted March 22, 2017 Share Posted March 22, 2017 Only for metal parts. If time is important. I assume you are over 18, you will need to be to buy this. Dichloromethane. It is what used to be the active ingredient in most paint strippers up to 2009 Nitro-mors ect. It is illegal to be sold as a paint stripper in the EU now, but can still be purchased very easily for other applications. I get mine from a local model shop that sell it as a type of plastic glue. It's dirt cheap in most cases. If you ebay it you should be able to get 1L for £2 or somewhere there about.https://www.youtube.com/watch?v=ds6QixjSy5chttps://www.youtube.com/watch?v=T0-WrD5ckh0https://www.expotools.com/cgi-bin/sh000005.pl?WD=plastic weld&PN=Plastic-Weld-PW.html#SID=175 Warning, The stuff is super aggressive, will eat any of the thin medical style gloves. Work outside, Work with thick industrial gloves. It will destroy anything made of plastic so don't even go there for plastic stuff. It'll remove most spray paints in a few seconds with a dampened cloth and just wiping, the paint will dissolve totally in a lot of cases. Dries near instantly, And can be repainted over after a quick wash in soapy water. It is the single fastest paint remover I have ever used period. Cleans right down to the metal instantly and has very little clean up time as it's a potent degreaser as well. I did a motorbike fuel tank with the stuff, Took it from hard clear coat to bare metal in about 30 mins without any hard scrubbing or sanding. I also did an M4 I picked up the other day with it. 10-15mins of gentle wiping and it was back to bare metal.The stuff is very hard to beat. For plastics. Fairy power spray. Spray on, leave it 10 mins and rub off the paint. Doesn't work so well on glossy finishes. Detol is also good but I find it too slow, and on etch primer it'll be sketchy at best if not left for a long period. Link to comment Share on other sites More sharing options...
Nicky blue eyes Posted May 15, 2017 Share Posted May 15, 2017 Sorry to hi jack but has any one found the dettol leaves the plastic a little bit worn looking? And has any one tried back to black on thier gear as well? Link to comment Share on other sites More sharing options...
Supporters Samurai Posted May 15, 2017 Supporters Share Posted May 15, 2017 Halfords matte black is good for that. Link to comment Share on other sites More sharing options...
Nicky blue eyes Posted May 15, 2017 Share Posted May 15, 2017 Might it be worth just painting over the existing krylon or dose this lead to new problems? Link to comment Share on other sites More sharing options...
Nicky blue eyes Posted May 15, 2017 Share Posted May 15, 2017 On 2017-2-23 at 7:14 PM, sniperslucky said: I've used the Dettol weigh mixed reviews, Yes most of the paint has come off no problems but i don't know if because the gun needed another soaking the paint on the receiver looks a little worn now . Gonna try the tar and glue remover to get the last bits off. Ps: Does the Dettol last more than one use as it's gone cloudy ? How did the tar remover go? And what brand did you use if you did? Cheers Link to comment Share on other sites More sharing options...
Nicky blue eyes Posted May 15, 2017 Share Posted May 15, 2017 I will give the paint a go as well if all else fails. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.