Search the Community

I purchased this brand new and before I'd even pulled the trigger once, sent it off to Luke at Negative Airsoft for him to turn into the best lightweight DMR it can be. Because I don't know about you but personally I think it makes more sense to have a gun you can actually shoulder repeatedly and carry around all-day. This has all of the reach but far less heft than some of its counterparts, such as the SR25. It's had helical gears, bushings, piston, piston head, nozzle and tappet plate spring, in order to optimise its performance. However, the most significant (and expensive) internal upgrades come in the way of the Perun AB++ MOSFET and Warhead Brushless motor. However to further increase the always sought after range and accuracy, I installed a ZCl inner barrel and Maple Leaf Macron+Omega combo. The Airtech Studios barrel stabiliser is the the icing on the cake in that regard. I tested it yesterday and set the hop so it was so it was starting to lift 0.36's at the end of my 30M garden (it definitely wanted to stretch it's legs way beyond). It was giving me a consistent 313/1.64J - which is perfect for my regular site. I've found you can affect this number by using a different weight of BB, so you need to apply more or less hop. For example it was giving me 1.88J when set for a 0.32. Alternatively you could just change the spring, as this does have a quick change spring. Albeit the type where you need to remove the gearbox first. It's only been skirmished about three times and then stored in a high quality rifle bag (not included). In fact it hasn't actually been skirmished since Luke last opened it up. So it's in excellent condition both internally and externally (although yes, some minor marks may still be present). It will come in its original box with an extra G2 90 round mag, which has the follower that activates the stop on empty feature. Honestly I haven't decided yet whether to include the V7 stock (which was nearly £60 by itself) or the original. Link to Negs video where he's doing the bulk of the work: (it's been back to him between then for further improvements and health check). Stated price includes PayPal fees and Parcelforce 48 courier. Please PM me any questions, as I don't get notified of anything asked on the listing.

As per the title, this is not a piece which has been bashed around an Airsoft site. Because of this it's in excellent all-round condition. Nit-picking you'd notice minor paint wear on the rear sight. Nothing else stands out as I look over it, but I've taken photos from a variety of angles in natural lighting, so the potential buyer can see for themselves. Please note, this was previously listed with real walnut grips included. That is no-longer the case, this will now come with its original plastic ones. The price has been lowered to reflect this. I believe these really are the pinnacle of Airsoft revolvers. My understanding is that the frame is made from metal and barrel from plastic but honestly, the finish is of such high quality, I couldn't even say for sure what's what when holding it. Holds 14 rounds, so definitely skirmishable if you're so inclined. In that environment it would definitely make up for anything it's lacking in range and accuracy, by the sheer awesomeness of getting kills with a revolver. Stated price includes PayPal fees and postage. Please PM any questions, as I don't get notifications for anything asked on the listing.

Bought this new to go with some new camo I wear. Only worn once in the house and decided I didn’t like it so it’s never been worn in the field or had anything attached to it size is a large can post or deliver (within a close enough area)

Preferably with little to no work needed but happy with anything at this rate. Based in Wales but can collect depending on where you are based.

This was only briefly fitted, but never skirmished with it on. Unfortunately one of the rear sight Allen screws rounded, so there are some marks on and around the rear sight block, from where I had to remove this. However I tested it after and everything worked as it should. I've tried to capture overall condition accurately, by taking photos in natural light. This is a very high quality one piece CNC upgrade for the AAP-01. Not only does it look and feel great, but it gives you a top and bottom rail for lights and optics etc. Stated price includes PayPal fees and tracked courier. Please PM me any questions, as I don't get notifications for anything asked on the listing.

Hogue pistol grip fits Tm Mws Gbbr or anything that uses a real steel grip £30 posted

I offer SOFTWARE for Arduino stopwatches with a second counter for Airsoft, Paintball game - Capture Point game mode. Project description: Domination Timer is a device - a stopwatch for sports such as Airsoft, Paintball, which allow you to measure the time of occupying a point with a resolution of seconds. The stopwatch is equipped with a 16x2 / 20x4 LCD character display. After switching on the device, it is possible to switch between menu items on the display using the rotary encoder - KY-040. Through the items, it is possible to start the Domination Timer game mode, which responds to user buttons (inputs), or it is possible to set the time of team occupancy before the game in the configurable mode. This parameter represents the required length of holding the button until the team successfully occupies the point. This configurable parameter is implemented for the number of seconds. The second configurable parameter is the automatic end of the game to reach a certain number of hours of the stopwatch with the UNLIMITED option - when the stopwatch counts to infinity, or after the maximum display time on the display - 99 hours, 59 minutes, 59 seconds. Stopwatch is using Arduino microcontroller (with AtMega chip) or a it can use that chip stadalone. Chip controls whole Domination Timer settings, logic of stopwatch etc. There are 2 teams in the game - RED team and GRE team, which play against each other and occupy the imaginary point that is formed by this device - Domination Timer. At the beginning of the game, the display shows the times 00 hours, 00 minutes, 00 seconds for RED team, GRE team. Button Domination Timer uses button input for the action of occupying a point by a team member, as well as for input of a referee entity. Thus, a total of 2 buttons for 3 system entities, the switching buttons connected in the INPUT_PULLUP mode are used. Pressing the button feeds the GND signal to the Arduino digital input terminal (Active-LOW switching signal). Switch buttons are used, not switch buttons (they would not react to the system logic, all software would always be "pressed"). The configurable Domination Timer responds to the length of the press, which is set in the configuration menu via an encoder. It is required to hold the button for a given time. The system does not respond to short presses. In the extended version, it is also possible to set point neutralization (stopping the time of the active team at the point if a member of the other team holds the button at least 50% of the required time) The times are displayed on an LCD character display measuring 16x2 or 20x4, which communicates with the control microcontroller via the I2C bus. If a team member of the RED team occupies a point by pressing a button, a buzzer is launched, which announces a change in the point with a short beep. Then the RED team's LED at this station will light up and the display will start adding time for that team. If the point is occupied by the GRE team and the team member presses the appropriate button, the buzzer sounds again, the GRE team LED lights up, the RED time is paused and the time of the GRE team that occupied the point is counted. The referee must stop both buttons at the same time to stop both times. Times are stopped until the point is reoccupied by some of the teams in the system This type of input is thus suitable for starting a break, but it can also end the game for its evaluation. In the case of the COUNTDOWN game mode, the combination of both buttons is intended to stop the countdown time! The new game is implemented by resetting the entire Arduino board via the RST button, or by disconnecting and reconnecting the power supply. In the menu it is also possible to configure the activity / inactivity of the buzzer, which can also be included in the game. Domination Timer game mode uses a buzzer to announce the current occupation of a point. Eraser does not exist in this type of Domination Timer. A second game can be implemented in the system - countdown, which allows you to set a minute countdown while it must be stopped. The player stops the countdown by holding both buttons for a certain time (based on the configuration menu for the length of pressing from Domination Timer). Configuration menu is divided into: Start of the game DOMINATOR (2 teams) Setting the time for filling a point (how long the player should hold the button - X seconds) Set maximum game length (unlimited / X hours) ON / OFF detector in the game Countdown setting for countdown game (X hours) Start of game COUNTDOWN (1 team) All times and settings are stored in the EEPROM memory of the Arduino, they are available even after disconnecting and connecting the power supply, it is a non-volatile memory. The transcription limit is at the level of 100 thousand. The display is limited to a maximum of 99 hours, 59 minutes, 59 seconds. The 16x2 and 20x4 LCD display is fully compatible. Hardware inventory: Arduino Uno / Nano / standalone AVR chip AtMega328P LCD character display 16x2 / 20x4 I2C converter for LCD display 2x buttons (switch) 360 ° rotary encoder - e.g. KY-040 (or similar) 2x LEDs Optional - buzzer I offer the program in .hex machine code (compiled firmware), so you can't edit or change anything of webapp. The project can be tested in advance in a test version with a measurement of max. 1 minute for each team. The program in .hex can be uploaded to Arduino via the AVRDUDE tool, or Xloader, which has a graphical interface for easier control. Firmware is available for I2C communication address of LCD display 0x27 or 0x3F. More about project: https://martinius96.github.io/Airsoft-DOMINATOR-RFID/en/dominator-encoder.html Alternative contact: [email protected] Shareware version of project: Project can be tested for free in shareware version that i available on project website. It have some limitations, like... Maximum game time 1 minute in DOMINATION game mode. After this time both times will be paused. Also there is not possible to use COUNTDOWN game mode. If you don't have hardware yet, you can try it in Wokwi simulator: https://wokwi.com/projects/345627939761554003

Cyma CM041 H MP5 in great condition, used for around 3 skirmishes in total but I'm slowly becoming a GBBR convert and want to free up some funds for a new purchase/upgrades. These are great RIFs out of the box and have a lot of great reviews. Apart from the Cyma standard mosfet is made from cheese, but this has been replaced. Running on 11.1v Li-po's this is shooting around 25rps and is reaching out to around 60m on .28s-.30s. Internal upgrades of: Rocket O ring air nozzle Perun V2 Hybrid mosfet Maple Leaf Macaron 60 deg bucking and Omega nub Wired to Deans Comes with: 2 x Cyma polymer 130rnd Midcaps 1 x Cyma 500rnd Hicap I'm open to swaps. Mainly looking for SMG's/GBB's as a preference and not particularly interested in anything 'speedsofty' (sorry, just not my thing).

picked this up about a year ago, have yet to actually mount it to anything for longer than a few minutes, to test. Doesn’t quite fit the aesthetics of any of my builds. Works perfectly (actually slightly better than my HW exps optics.) Holy Warrior are the MVPs of Chinese repro optics. Doesn’t really get better than this, unless you’re willing to drop the £850 for a legitimate uh-1 g2. selling as I need to downsize.