Mike636

Nope, I just put the old followers on and trimmed the bottom

They feed .25 with mine. I used the followers from my old magazines - I cut them to the same length as my old springs then left them for a week before retesting them. They functioned fine but I left them full for the duration of NAE

These only seem to be proposed changes and recommendations - has it been laid down in legislation?

Try these - you will need to trim them down or they will fire bbs all over the place but I used them to replace the springs in MAG 120 round mid caps http://www.rsov.com/product.php?langId=1&currencyId=1&manufacturerId=10&prodId=15476&cateId=0

You can get them from wgc shop and e hobby asia too.

Gerber Recon LED torch, the red light is pretty discreet

I looked into this a while a go and IIRC they test the 6/12 Joule limit with a steel projectile that is significantly heavier than .20g

If its new and from a shop send it back!

3 games in MORE than 2 months.

Mine was that part 87 was catching on the inside of part 93 so it wouldn't reset when returning to battery all it took was a little sanding maybe .5mm to 1mm and it works fine now. Also try pushing the magazine up as you fire as it maybe the plastic magazine release

I heard an little rhyme once from a medic about arterial bleeds "If it goes further than a foot you're fucked"

Erm no idea to be honest bombers I think, it was a couple of years ago and if you had met him you'd know as he's as subtle as an air strike

You don't happen to know a big daft gobshite called Wombs do you?

The front end is how it comes from WE - just did a basecoat of grey with khaki and brown over the top - all Krylon

Join as an air engineer and spend your career avoiding the wet stuff and if you do end up on it - flight decks make excellent volleyball courts!

Sprayed the Katana at NAE, wanted to Afgan and back to the barrel & stock but I forgot white spirit and Southern Comfort didn't work.

Never say never but I agree never use trauma kit like CATs without knowledge or training. I've not seen anyone mention gloves and sanitiser - I know how mucky and sweaty my hands get so I don't want to be poking my big meaty paws in an injury without protecting myself and the casualty as best I can

The game doesn't start until 1030hrs so it had warmed up by then so GBBRs ran fine

Sorry what? You looked at this entire thread and thought you were unlucky?

Even a shit solicitor is over £200 per hour

Might be the cut off lever

I don't know I saw two people mouching about on that scooter Saturday night

Meh, I was a bit underwhelmed by the playing area to be honest - it's just a big forest with loads of paths, which are full of people hiding in trees so moving around is a pain in the tits if your unfamiliar with the site. Camping is good, plenty of room spare on the site. Only one big airsoft shop - it's still Zero One at the end of the day. A few people had bits and bats laid out 2nd hand.

Handy guide for you with pictures and everything http://www.air-lab.co.uk/workshop/sorbothane-installation-instructions?SID=gbhcc764188rki2atn3es2bfj0

Hmmm did not read the thread title at all!