Davegolf

Normally quite warm in Flamingos native environment ?

Primary!!?

Very nice, what is the base gun?

@Mullvad

If the problem is isolated to the gun itself - EG it’s not a mag problem - then I would look at the following; - Make sure the piston seal is properly lubed. - A new TM bucking - A new TM nozzle - I know ? I assume your going for full mag dump, so make sure the mag is correctly filled (upside down), non green gas modded, not over filled.

@heroshark needs help I think ? PS glad to see the Derringer is the star ?

@JamesWills something is up with your hop unit or that bucking is too thin to apply enough hop. A stock TM bucking with Super Nub should you see you accurate at 50M on 0.28s or much more if you step up to 0.36s which IMO is the diet an MWS deserves ? @Whereismyhammer so currently completely stock other than G&P nozzle? When you say jamming please explain. BBs jamming up the place or nozzle/bolt getting hung up?

So it’s fine with the TM nozzle? Standard TM bolt or is that G&P too?

@Whereismyhammer have you put the gun back to stock and checked the fault is gone? Then add modifications one at a time.

@JamesWills what FPS are you running and what range are you getting? Actual measured distance.

@Mullvad welcome, this is what you are looking for; https://www.highpressureairsoft.co.uk/store/p696/Geissele_Super_Modular_Rail_MK4_M-LOK.html Can never have enough gnus!

Yes, wish TM would put out a gas 416, an AK105, SiG MPX 9mm and remake the MP7 full size!!

Yes, application should only be minimal. just looking for a thin film / dusting.

Yep, love that stuff. And this for everything else metal on metal...

Yes that part ?

I know @Wo1f & @Bada Bing and many others only run propane. It is perfectly safe for the MWS innards. As long as you don’t mind the smell ? @AlphaBear unless you are going through ridiculous amounts of ammo you do not need to add lube to the gas on the MWS. Rather as part of your maintenance routine re-grease the piston seal before or after every game day with quality silicone lube - EG TechT GunSav Decent lube will stay inside the nozzle/piston assy, so you do not need to compromise your bucking by contaminating it with excess airborne silicone. The pros and cons really only come down to cost and the fact you can run MaPP in the winter.

I personally can’t stand drop leg setups, even when they stay put vertically there’s too much mass rotationally if you’re active. Hip or rig mounted all the way ? TBH I only have the thigh strap for a more positive draw being kydex/snap retention.

@Captain Darling runs off to make a URGI MWS ?

Nice job there @RMDavis OD Pmags would be the icing on the cake.

Loving my new holster setup, Kydex Customs mid drop, KC basic holster, DIY thigh strap. Access/pistol grip to draw is awesome, no flapping around even with full steel pistol, no chaffing from strap, and you can sit down without knowing there’s a pistol. Im sure many others have been and done this before, but to those who haven’t it’s a great setup.

LPA Luminova sights for my Shadow2 ?

Also check if the problem is just one mag causing the issue, it may have damaged feed lips. @Hypokondrikern surely it’s down to your play style, both could be useful if your at assault FPS levels, MRO for active gaming upto medium ranges, and the short dot for more sneaky play / medium long ranges. Def the latter if you are at DMR FPS.

@Whereismyhammer check the bucking feed lip is in good condition, check the nozzle is not damaged; particularly the little tab that picks the BB up and the hole/front leading edge. Geoff’s or Devil blaster or Green Devil are all high quality ammo.

Bottom left hands down coolest

Best thing to do is rotate your mags so they have longer to settle down before you use it again (assuming 2 BB loads per gas fill)