SBoardley

You’ve also got to take into consideration, the disassembly and reassembling when upgrading and tweaking ngrs. I’ve stripped out two lowers and two buffer/ receiver extensions. These things are toffee metal. Like I said above, internally keep stock, just change the inner barrel.

I would try a tighter barrel. This takes five minutes to chop out, and will increase your fps albeit nominally. Problem with tm (from my own experience), you change the spring, you then have to change the piston, you then have to change gears, then you have to keep an eye on bushings ANd wear on the shell itself… not to mention having to add a mosfet to protect that trigger from wear from spamming semi…. try a tight barrel and keep the oem hop up.

Yeah. I had heat a knife and alter the position of the mag indent to get these to work… see pic also check out @Rogerborgtech post which is kind of relevant to your issues

Sweet. Glad you sorted it. As far a barrel goes, do you have an outer barrel that you can swap out to see if it makes a difference? Also…. You could try a G&p mag release, these have more material on the upper of the tab which, if you do have a gap between the base of the hop and the magazine, will pull the mag higher…pic is of me fitting one to an ics but doing the opposite ie removing material…

On the barrel front as @Adolf Hamsterasked…is your barrel straight? Long ago in a distant universe I bent a barrel jumping out of a bunker while being chased. I was gutted; gave it to a tech who fixed it. I asked him how, he replied simply, that he’d just bent it back. Simple. as for mag feed, while I seldom use aegs, I remember having feed problems with a G&p again long long ago. I was trying to get the star low caps to work in it. again as Adolf said it could be a timing issue or it could be a hop issue. Question: when you put your finger down the mag well, can you move the hop up forward and backwards ( direction of barrel and stock)?

Keep them all. From my own experience, I pretty much regret selling the ones I passed on. I also regret spending money buying some of them all over again! sounds to me like you have a nice varied spread/ collection.

Oh dear, you came back.

Mate….my work here is done. ?

Ooooh. Not sounding so clever now are you?

Hey; if like your head up your arse, I will leave it there next time. Was just trying to help mate.

Egg pig staircase footlocker, um, civilisations uh skatepark… just my five cents.

Yeah I know the gearbox are different between the two ics versions… I have them both in my possession but never fitted one to the older non bb. So will be interested to see your results mate.

G&p LMT on ics ebb.

I’ve put G&p grips on ics with minimal modding, so I was speaking from my own experience.

They are compatible but you may have to open up the screw holes in the top of the grip that connects to the gearbox slightly. As ics are slightly off spec to G&p and tm pattern.

Are you a nonce? This is bad taste. Please delete.

Have you managed to source an ambidextrous selector? Brownells had them then went out of stock quicker than something going very quickly indeed.

Last time I looked, vaccinating isn’t mandatory; maybe that’s why this thing isn’t going away. on a personal note, I’m a stonemason, most of my work is outside. I don’t get the sniffles, can’t remember the last time I had the flu either. I’ve had my vaccinations because if I was to catch this and pass it on to my elderly relatives, I would never forgive myself. Remember, these vaccinations aren’t just to protect you; they are to protect Everyone.

So you don’t believe it…..but we’ve been lucky? Maybe that’s because we’ve had draconian lockdown measures, used masks AND had one of the most successful vaccination programs in the world….oh and don’t forget the brave NHS workers who worked tirelessly, even more so for the last 2years, and died on the frontline try to save our old and infirm? shut up you nobber. (Apologies)

MNot my first purchase, but am again amazed at the quality. First class.

Heard this one the other day: Q: Why is Santas sack so big? A: Because he only comes once a year!!

Just letting anyone interested know; I received a package from hao yesterday via airmail. It took 12 days from order to receipt. So all seems good there again.

Hmmm. Broken selector, randomly generated stock and grip…. Also, does this have the bolt stop piece to function or does the buyer have to send of for it like all the other disappointed customers?

Started badly, but a great recovery!

Yep. Your definitely a crack whore.