SBoardley

+1

Angry gun surefire. Good quality flash hiders with decent enough can.

That’s great to hear bud. As for recoil, more stock than ghk, but I’ve yet to try the mws.

@Regamuffini forgot to ask if the nozzle is moving freely inside the bolt carrier? ie when you pull on the nozzle and release, does that t spring back into the carrier?

The bolt lasts for years mate as do the hop chamber. And like I said; if the trigger resets manually it’s probably fine. Pretty sure it’s a nozzle or hop issue. Cus these m4 normally just work. I’ve only had issues using a ra tech npas. Literally no other problems, but I never use auto so trigger box lasts too.

Hmmm. I guess we gotta wait for the new nozzle and hop rubber dude. I’m kinda stumped as to why it won’t cycle, but I guess replacing to two most suspect parts should sort it hopefully?! Lol.

Ah. Um do you know what hop rubber is in there. I use maple leaf autobot. They come with a metal ring to improve air seal. I never use it cus I require less fps. Wondering if this has been installed.

Tbh it sounds like the valve is shutting too quickly. I’ve had similar when an npas is shut too far down. Does the nozzle stick in the hop? How much gas are you putting in the mags?

How many mags? Do they all do the same?

You did put the spring in before the valve right? Have you tried a different buffer spring?

Ok. Look in the underside of the nozzle. Do you see a plastic valve or a metal one?

If it resets it’s a bolt/ nozzle problem. Have you checked the detent and underside of the bolt for damage?

Does the trigger reset when you cock it manually?

The buffer detent is the stud that keeps the buffer in the tube ( receiver extension/ buffer tube) on older WE’s these can sit a taddle high or work loose; in effect they rise and catch the bolt. The bolt has a groove that lets it ride over the detent. Look for scratches or damage to the groove or rear of bolt. These are signs it’s moved.

Have you checked the buffer detent? If this is loose ie sticking up too far, the bolt can catch it and not cycle back to reset. Also the nozzle guide may be damaged… the little piece on the side of the bolt that locks in. If this is damaged the nozzle can twist causing friction.

Yes. The nozzles come complete ready to drop in. I use a white lfs disc in one of my m4’s which chrono around 300 on .25g. I use .25g as one of the cqb sites I play at limits weights to max .25g angry gun mpa works pretty well too. Complete nozzle with plastic npas. Though I had to swap out the oring on the back for the stock WE one as it was a little baggy and jammed up the bolt.

I know I have 2. They are both 9mm or .209. But the original ones circa mid 2000 used 12 gauge blank or 9mm with adapter sleeve. Like I said the kid had the 12 gauge explode down his top and it vented over his chest!

Dynatex bfg used to use 12g cartridges. Whatever they used, the kid had black burns radiating from the middle of his chest outwards. He had to go to hospital to get looked at.

I was a Marshall at ground zero when a freak accident happened; a young lad had a 12g bfg land down his draw vest. Many years ago. It exploded and he suffered powder burns to his chest. It wasn’t funny. It was a freak accident which led to 12g being banned across the country believe. Now I love 12g, still gutted you can’t use them anymore but I do understand why they were banned. Imagine if he was blinded.

There are idiots that use these. I was playing along side one couple months back. The guy had shit tons of them and was firing them at groups of attackers on a very flat trajectory and then wondering why they wouldn’t explode…( they were yellow timed ones I believe) I kept telling him not to aim straight at people and to lob them up in the air cuz that would probably give them time to work and not hurt anyone but he wouldn’t listen and kept moaning they were duds… fucking idiot.

So let’s regress somewhat, and remind ourselves of the video clip…. little pussy shoots steroid monster in the face, then with no where to go and no meaningful defence takes a beating like a bitch? Mmmm. Sounds like this thread.

0 fucks given

@Mr. No_Face you are a boring cunt

Mr no face….coming to you at shopping mall somewhere in the south 5173CC84-DDB8-4726-AA5E-A6D9ED424EEE.webp