Alimcd

Best: KJW KC02 Worst: KJW KC02

Was that Kyle? He’d mentioned they were stand offish about his mtw

For every realistic pew I do, one of these happens

AAP build starting to take shape, waiting for a pair of custom grip scales with Ruger medallions inset, low profile mount for the Viper and a freshly cerakoted metal upper receiver to come back from Jack at Airsoft Engraver with Ruger MK4 Competition trades

Just taken a punt on one of these. Looks like the Vortex Venom has been knocked off! @rocketdogbert the seller has ten left atm ￡124.77 18％ Off | V.E.N.O.M Red Dot Sight Reticle 3 MOA including Picatinny Rail Mount https://a.aliexpress.com/_mK4KOdk EDIT - Seller has no stock and he’s just trying to swap sell me onto other optics.

Treated myself to something a bit more aggressive looking for one of my KC02’s Moving the guts from this rifle into it

@Impulse and @Terrywristt a good friend of mine is going to be recasting some Ruger grip medallions if you want to go the whole hog doing the MK4 Competition look. He’s doing some custom wooden grips for mine at the moment and then Jack at Airsoft Engraver will be copying the proper trades Since getting Covid, I have t managed to get in to work to have a look at how mine looks at the moment, just had the upper and trigger cerakoted in graphite black

The Ruger medallions and some wooden grips are going to a mate this week to be done to a standard I can’t achieve myself. In the meantime, I’m going to stick some Infinity medallions in there and see if anyone gets triggered.

Also, can’t remember if I actually shared a proper picture of the finished Battlecat with adv frame. The matched KC02 is a full auto 1.1J build and equally gaudy

In my head “fully upgraded” is synonymous with boneyard. Im just bored and stuck at the in-laws, retail therapy is my coping mechanism

Here’s something that’s a bit of a work in progress. Got a ring pull style selector on the way that’s more in-keeping with what people seem to use on the actual MK4. A friend is printing a much lower profile mount for the Viper that’ll take it much closer to bore. Since concept, the goal has gone from MK4 Lite to MK4 target, so when I get all the upper elements Cerakoted to match; I’ll get some accurate trades lasered back on. The Ruger medallions will end up set in some wooden grips for a less “tactical” and more “old school plinkster” look Next headache is getting it site legal. There’s a 180mm barrel in there that’s currently delivering 1.5j in full auto… Going to try either restricting the nozzle or shimming the rocket valve to bring that down to 1.1 on temp appropriate propellant or HPA at 95psi

I’ve ended up leaning in to my AAP build pretty hard. Hit go on: Airtac Glock>MP5 adaptor Vortex/docter fit RDS mount CCT hammer set, Knocker lock and sear CCT nozzle set DP hammer spring TM long mag (for when not using it on HPA) CTM wooden grips (to restain and recess some real Ruger grip medallions into) TTi ring pull style fire selector At this point, it’s just the trigger bar, inner frame and hop unit that’s actually from Action Army

Skara has already seen it but my AAP is taking shape. Need to get the upper Cerakoted in graphite black to get rid of the 50 shades thing it’s got going on

@PTRCheck out www.HiCapaHub.co.uk Kyle is the font of all wisdom for capas on this cold, wet and windy island and to cap it off, he’s a top bloke. He carries the Airsoft Masterpiece range, which are the go-tos if you want to do it once, properly 120% hammer and recoil and spring set and barrel spacer should be all you need. Personally, I’d change the bbu at the same time as the TM part is incredibly heavy

Its a vinyl wrap because the Chingrish on the tracer just let the whole thing down. The O lights are incredible. I’m amazed by the difference in brightness between the PL2 and the generic/nuprol lights I see people play with

Not a candle to the length you’ve gone to on that Glock but my GSB4.3 frame arrived. Total weight of the build with mag/tracer and torch is less than a stock TM 4.3 without a mag 803g vs 825g for an unloaded, naked TM

HiCapaHub just sourced me something I consider to be a grail item - 4.3” advance frame! Kyle knocks it out of the park again

Slapped a Ruger Target stock onto my Rogueworx Underlever KC02, aside a Rogueworx trigger it’s pretty much complete The Trijicon VCog knock off is surprisingly nice too! Beautiful glass that’s on par with my Vortex Crossfire LPVO

The splash pattern is anodised, I got it done to match a KC02 It’s a pattern that Rogueworx call Nightwind. I’ve got another Capa/KC combo in a splatter pattern called High Roller but I’d been holding off on sharing it much until my 4.3 Adv frame arrives The 4.3 frame, rare as they are, has been sourced for me by Kyle as he’s a total legend and may even be inbound. Wooden Capa grips are from a brand called Pandora Arms. They’re very thin covers that just adhere to the standard TM grip. They’re really beautiful but time will tell if they’re up to taking a hit!

Kyle is definitely THE go to Hicapa guy in the UK. Shit at Zorb football though, eh @Steveocee

I was pleased with how these cheeky chappies turned out but your TRP is next-level

I worked out how to copy the Discord link finally. For all things Airsoft 10/22, this is the place https://discord.gg/saustrich

Here I am with Chris of PPT Custom who’s made all three of my outer barrels. He’s Arnie and I’m Danny Devito in the pictures

Clearly that last photo should have had an Aussie flag on instead