MagpieTactical

If you know, you know

So got an Esstac KYWI. Works great, and still holds my Glock mags, so no changing out the pouch depending on sidearm.

Esstac KYWI pistol mag pouch. Works great for my FNX45 mags, and my Glock mags.

Not me, but a mate after deciding to be a juggernaut

Nope, just because in my looking at MWS and TM MP7s, I saw the green gas mods. Knowing the TM Fnx mag also has the silver tube, and living and playing in Northeast Scotland, I figured a little extra gas in the mag and possibly better efficiency could only be a good thing The trades on the TM aren't even FN trades, they are TM trades made to look like FN trades

I have just gambled and ordered an Esstac pouch after lots of youtubing etc. Will see how it goes. Appreciate the offer Lozart, will see how the Esstac does.

Struggling to find a mag pouch that fits the FNX45 mags I am Looking for a pouch with a velcro flap as I would like to also use it for my Glock mags. I know you can get kydex ones, but would prefer a pouch that works for both not for just one gun so I don't have to swap every time I run a different pistol What do people use for their FNX mags? Show me or tell me all though, as I coukd be swayed

I wonder if I had seen that already 🤣 haha

Bruh, was just curious. It's in our nature as Airsofters lol Also playing in the colder weather I thought it may help it be a bit more efficient during the winter. I know you're right it works fine lol

So I have noticed the FNX45 magazines have a silver fill tube in them similar to those on the GBB MP7 and MWS mags. Question is, has anyone shortened/removed these from their FNX mags to increase gas capacity? Don't want to disassemble my mags if there is no point, so if anyone has done, or knows if this makes a difference it would be handy. If anyone has a goosed FNX mag to try it in that woukd be cool too. Thanks in advance

I should have mentioned they seem loose on the actual Abbey cans. Have tried it on three cans now (after this thread made me think I woukd give it another go) and it's loose on all of them. And the gas goes everywhere lol Hope the OP has more luck with them, or as it seems, they may work fine on the WE nozzles.

So I have been thinking of scratching the Gbbr itch for a while. What I want to know is realistically how useable they are in mid temperature UK. I woukd be looking at the TM Mws or the TM Mp7. Playing in the North of Scotland, typical summer temps would be between 10 deg C at the start of the day to between 15 to 22 ish on the nicer days. Are these systems fully useable at 10 degrees? Winter it woukd be back to the AEG

100% I don't know what they need on the ground whilst sitting in safety in the UK. I am happy to believe that by donating money, this can be used to appropriate the things they need, where they need it.

If you're trying to make the point that they use AR pattern rifles in Ukraine, then I think thats been established. However, the units that use them have kit and don't need our airsoft cast offs. There are even units out there who are equipped with the SIG MCX, again though they have kit. The run of the mill Ukrainian people taking up arms, have barely been properly trained to use the AKs they are being given, and certainly not on pouch admin etc. As has been said, a basic satchel with mags, a molotov cocktail or two and they can quickly and easily blend in by ditching two items if necessary, rather than struggling with a load of kit to take off.

Lol, I am sure the Russian soldiers will turn around in fear once they see someone in some Viper chest rigs.

Pretty sure the civvies they are handing guns to are getting the AKs though. The army will have kit.

Yeah. I bought one to get Abbey gas into my FNX45. Pretty much experienced what you described. Not really long enough tbh, and very loose on the nozzle, so didn't work well. Ended up getting some (thinner than stock) 3d printed base plates so I could ditch the need for the extension

I remember the mouth guard (I think that's what it was called, possibly the nose guard) detached from inside my S10 doing decontam drills. Of course I couldn't then get my resp. back on properly and when I opened my eyes to see why the instructor wasn't responding to my raised arm, he had his back to me helping someone else. Ran out of air, lung full of CS. Is it weird that I strangely enjoyed the RTF?

Nice indeed. Much modification needed?

A clone HRF Concepts Ramp for my clone Modbutton. Gives me a nice distinguishable button for the NGAL which feels different to the white light Button.

Cheers, yeah i think they look cool. Its a cheap viper from amazon. Trimmed it down, and used a lighter to seal the cut ends, then replaced the black shock cord with the green. Seems the only option for shorter suppressors is a custom or real one. Or do what I did lol

Cheap suppressor cover to try for the looks

Ah I hadn't checked until recently. Had sort of presumed as this thread was near the top constantly, that there must still be issues. So by several, they mean loads of weeks lol I do find it interesting that they seem to be able to send RIFs to the UK for YouTube reviewers etc, but not for paying customers.