Daveoc33
-
Posts
259 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Daveoc33
-
Sorry @Tackle that was me that got the last g3 stock. If I see another one I'll give you a shout. I kept missing them when the came up on here as well! -
I want to know if it's going to be non-plasticy like all other augs except for the ghk. He says "solid fybre-reinforced nylon body" which makes me wonder if it's not plasticy but also: where has he sourced that body from? JG, APS, snow wolf, army armament aren't made from nylon. I thought it was a JG base until I saw that.
-
Nice. It's on his website too with 180 round midcaps (which Nov warns about mid cap syndrome). Not keen on the mlok myself but he has the classic a1 which is good: https://eu.novritsch.com/products/gun-systems/all-rifles/rifles/the-ssr77-system/
-
This advert is COMPLETED!
- For sale
- Used
This is my TM high cycle. It's missing the foregrip block but I think it looks better without. It has a perun for Aug fitted and the trigger response and ROF is amazing! Fps is a bit low at 200fps and the hop could be better. You could probably run it in CQB fine but it likely needs a bit of attention to get the fps up a bit. It comes with 2 hi cap mags. Its wired to deans. I'm after £130 posted for this.£130
- GB
-
This advert is COMPLETED!
- For sale
- Used
The mag is gas tight. It shoots a few shots and then gasses out when the slide fails to cycle fully. £65 posted ono£65
-
This advert is COMPLETED!
- For sale
- Used
The externals of the glock are mint and it comes with 1 leak free mag. The mag is not WE but is compatible with this pistol. £85 posted M9A1 SOLD More photos and chrono available on request.£85
-
This advert is COMPLETED!
- For sale
- Used
This is my ghk g5 with 2 working mags and 1 leaky mag. Also comes with some Lee's precision o rings. The gun is a former 2 tone but the blue paint is mostly only visible in the inside of the handguard. Happy to chrono and share more photos if needed. £180 posted ono£180
-
This advert is COMPLETED!
- For sale
- Used
If you want more photos or details please ask. I will chrono everything but I want to get a listing up to see if there's interest. Open to offers on the firehawk and CA M4A1. Cyma CM.045 AKS74U. SOLD G&G firehawk HC05 Dsg full auto only. Wired to deans. The rate of fire on this is incredible. It's an evil gun! I've only got an 11.1v wired to deans but a 7.4v would be more than adequate. £120 including postage. The middle M4a1 is SOLD The bottom m4a1 is classic army metal externals and a nuprol gearbox. The gearbox game from a nuprol delta recon alpha and despite nuprols reputation the donor gun was brilliant. The original gearbox had a trigger fault and I needed to quickly fix it so I threw in a working gearbox. Has a maple leaf macron hop rubber. This has been my backup rifle for ages and is a really good shooter. £110 posted. You need valid defence to buy these please.£140
-
This advert is COMPLETED!
- For sale
- Used
Tm hi capa in good used condition. Some scratches on the slide and frame. It shoots consistently at around 250fps on 0.2g with green gas. It comes with 1 TM mag. £85 including fees and postage You must have ukara or valid defence to buy this.£85
-
This advert is COMPLETED!
- For sale
- Used
It shoots well at 300fps on 0.25g bbs. It's a specna m249 polymer version. Its missing a rear stock pin, heat shield, top cover (although it does come with a 2 tone metal top cover that is broken). The mag release is also broken but it shoots if you hold an m4 mag in it. The grip is wobbly and the grip cover spring is bent and loose. No box mag. I think that's everything. Please check the photos or ask is you're not sure about anything. £100 including postage£100
-
He's releasing the ssr77a1 which I'm guessing is an Aug (stg77). Nice he's doing another non-m4 platform again.
-
You can't buy from them direct I know, but they were awesome. I lost the magnet holder for my p90 perun mosfet. I couldn't find the part at a retailer so I contacted them directly. They sent me a magnet holder out free of charge. The first attempt was blocked by border force but it got to me on the 2nd attempt. They were very helpful and friendly throughout and they really didn't need to send me anything FOC. It was really nice of them I thought.
- 1 reply
-
- 5
-
-
-
Eye protection, thoughts greatly appreciated
Daveoc33 replied to Biggie-Banana264's topic in General Discussion
For me these are great. They have a gap between the lens and the frame but it's not big enough to let a bb through. They only fog up if I put my hood up. https://www.bolle-safety.com/gb/tactical/outlet/x800-5292.html -
I think it's an old design. On action hobbies it says the s&t is based off the star m249 design. Star changed to ares a while ago.
-
The motor in the A&k and specna Arms m249 is not in the pistol grip. It's in the receiver. This is what the gearbox looks like. It's not a v2 gearbox. So a pistol grip from one of these won't work in a s&t m249. I hope this helps..
-
They did have a note on their old website saying order info and accounts will be lost on the new website. I didn't realise they had wishlists. My guess is the new website is good enough to go live and they'll iron out the kinks as they go. I wonder if they can give you your wishlist / data if you ask for it. The servers for the old website will likely still be there. Just not accessible to the Web.
-
This advert is COMPLETED!
- For sale
- Used
This is my TM fnx45. It comes with TM pro sight and 3 mags in total. It has an upgraded barrel and hop rubber - 6.00 tightbore barrel and a prommy purple hop rubber. Shoots very well and in really good condition. It's just not getting used. I've been unable to find the original mounting plate that would go where the red dot sits. It's shooting a around 300 fps on a fresh fill of green gas with 0.2g bbx I'm looking for £185 all in. You need ukara or valid defence to buy this please.£185
-
This advert is COMPLETED!
- For sale
- Used
This is a double eagle honey badger m904g. It's dead because the mosfet has gone. I've had a look inside and the solder has come off one of the mosfet connection points and a micro chip looks to have a little heat damage. I've tired resoldering but it's not working still. Externals are good and it comes with 1 hi cap. It's all polymer but really solid build. It's a quick change spring to so easy to open and close the gearbox. £65 including postage and fees.£65
-
Another aap-01 deal. £65 plus postage at patrolbase for the standard black version https://www.patrolbase.co.uk/action-army-aap-01-assassin-gbb-pistol?pv=14745
-
I've got the lite sport. It shoots really well. I used it on my last game day. My only problem is the retaining bolt/pin for the cylinder likes to creep out when you shoot it. Also the cheek weld on the stock is not great but you get used to it. I'm really happy with mine. Amazing value for money I think.
-
Beware of the MAG 170 round mid caps. These gave my cyma p90 bad midcap syndrome. When full the bb is under so much pressure from the mag spring it makes it shoot at really low power. From memory when I filled these up halfway they worked fine.
-
I want to know what kind of industrial fittings are holding that slat wall up. It must weigh an absolute ton!
-
It's hard to tell without knowing the make of each gun. I'd guess you could get £100 for each but they could be worth more. If the brand is unknown you'll need to assume it's the cheapest. You need to Google images of "m14 socom airsoft" and see if you can work out what you have. Maybe cyma, g&g, TM, snow wolf or jg (if they made a socom variant), aps is another maybe. Could be others depending on how old it us. For the m4 just find one with the same receiver markings.
-
I wonder if you just need a bigger house with a 2nd gun room... I have similar problems but my challenge isnt so much how to store stuff (I just use a chest of drawers) but how to categorise and organise it. You could organise by platform, brand, part type etc. I have 2 boxes of parts but each part well labelled in a zip lock bag. I have to empty the box every time I need to find something but at least I only have 2 boxes to deal with. Bbs and gas just stay in the kit bag I take out when playing, and mags have their own drawer. Watching this thread with interest to see what other people do
