Daveoc33

This was an impulse buy because I do like the look of these little glocks, but it's stayed in its box ever since I bought it. It even has the sticker still on it. It shoots fine at around 250fps in green gas and 0.2g bbs. Mag is gas tight. A quick Google tells me these are £119 new so I'm after £75 including postage fees etc. You need ukara or valid defence to buy this please.

TM M&p9 in good external condition. The only visible wear is on the rear sight. It's firing at 280fps on 0.2g bb with green gas. I bought this 2nd hand. It's a good and very snappy shooter. A few internal upgrades have been done to it including : Pdi 6.01 barrel Cowcow tech rocky trigger lever Steel hammer and sear set Safety blanking plates The only downside is the gas efficiency is not great. It can get through 1 mag before needing a refill. I'm suspicious it has a stronger recoil spring fitted but I'm not sure. It comes with 1 mag but I have more for sale if needed. I'm after £75 ono You need ukara or valid defence to buy this please.

This is a KWA kg36c it's in good condition but it is a former 2 tone (buttstock, handguard, rail). I really wanted to do something with this but need the cash unfortunately. It comes with 1 hi cap and shoots around 320fps with no hop up and 0.2g bb. It cycles well. I'm after £95 all in including postage. You need ukara or valid defence to buy this please.

In very good condition. It shoots well and cycles well. It has been well lubricated. It used to be a two tone but you can only tell if you remove the top slide and start removing parts. £75 including postage. If you have any questions please ask. You need ukara or valid defence to buy this please.

Open to offers on this. This was a bit of an impulse buy that I'm regretting. I still like the idea of a gas sniper rifle but this one isn't for me. I'm left handed the bolt pull is just so long for cack handed bolt operation. The build quality of the stock on this is really solid. I used to own a well mb01 which was fine but a bit creaky. This is properly solid. I'm wondering if it's nylon fibre. It is also super quiet to shoot! It's fps is low and varies between about 390 to 370with 0.2g bbs and green gas. I'd guess a new hammer spring may fix this (redwolf have them in stock). Wgcshop also have some gas rubber parts that will fit. It's basically a tanaka m700 clone in a different stock. Comes with 1 gas tight mag. Could be perfect for an HPA project. I'm after £130 including postage etc for this. You need ukara or valid defence to buy this please.

A few bits for sale here. Postage is £3.50 assuming it fits in a small parcel. G36 metal handguard £30 Zombie killer silencer £8 Echo 1 P90 metal handguard £30 Magpul magazine assist x2 £7 Kwa or AGS g36 hi cap mags. These feed in a kwa g36 and JG sl8 fine. £6 each Hi capa mags. I think 1 is WE and the one with the red gas router is armorer works:£17 each Well Mb01 mags. £6 each We g17 extended mag £30 TM M&p9 mags £17 each King arms sling stud bipod £20 Airsoft pro Mb01 gen 3 hop unit £25 Mb01 upgrade piston, spring, spring guide £20 Mb01 metal trigger £15 If you have any questions please ask.

This is my WE f229. It comes with 2 leak free mags. I've run both mags through it just now to confirm its shooting OK. It's chrono is around 250fps on 0.2g bbs using WE green gas. For chrono I did 4 rounds in each mag. Fps is a bit low but you could always run higher powered gas through it. The grips have been stippled (not by me) and the sights have had glow in the dark paint aded. They still glow in the dark £80 including postage fees etc. You need ukara or valid defence to buy this please.

This is a polymer jg ak47. It's the light weight budget version that was originally faux wood and 2 tone. The 2 tone has been removed and the externals have had some scratches removed. I've disassembled the furniture and resprayed the "wood" with krylon OD and the "metal" with halfords matt black. It shoots well but the cycling was slightly sluggish on a 7.4v lipo. Fps is consistent and just under the limit on 0.2g with no hop set. The butt pad of the stock does go on and stay on, but it doesn't take much for it to come loose. It comes with box and 1 hi cap. £70 including postage. You need ukara or valid defence to buy this please. Edit: I shot this at an outdoor range today and it shoots just as accurately and as far as my cyma cm.045.

I've had to do a minor fix to this gun: the hop unit was missing the little arm that you use to slide it forward and back. I've made a replacement from a vsr10 hop arm. The other issue with this is the charging handle should have a ring at the back which allows it to slide back and forth along a rail. The ring has snapped but with the top cover on the charging handle functions fine. It's also missing the screws for the RIS side rails. See photos. It shoots and cycles really well. It's nice and snappy on 7.4v lipo. The externals are in very good condition (practically new apart from a rub mark in the stock block). The ris rails do have 2 tone paint in the underside but I can't explain why they have this as there isn't hint of 2 tone on this gun anywhere else. My guess is these were once attached to a 2 tone handguard. It comes with box, hi cap mag, cleaning rod, instructions, 2x ris rails, front sight adjustment tool, and a sling. It's a really good ak and although it's polymer it is weighty. £90 including postage. You need ukara or valid defence to buy this please. Edit: I short this at an outdoor range today and it has excellent range. Shoots just as far and accurately as my cyma cm.045.

This is my army armament g36 gbbr. It comes with 2 gas tight mags. It's had an FG airsoft black restrictor disk fitted to lower the fps to sub 350. These are sold by milspec solutions. Without this it was shooting around 360fps on 0.2g bb in 14 degrees C. I'll include the blue and white restrictor disks in case it starts running hot in the summer. My guess is this won't be needed though. It was a 2 tone and I've owned from new since before I had ukara. I've used it for one game (not even a full day) but I'm too trigger happy (spammy) to run a gbbr. The 2 tone paint has been removed and resprayed black (handguard and stock). When I was testing it today it did on 2 occasions go to bolt lock when there was just 1 round in the magazine. Later testing it didn't do this so perhaps it just needed to cycle a few times. £120 including postage. You need ukara or valid defence to buy this please.

This is my used nuprol extra large hard case. It's the 130cm long one. I've never used it myself but it came with a 2nd hand rifle I bought recently. It has seen some use as you can see from the pictures. The case barely fits in my car, hence the sale. £70 collected. £75 posted. If you have any questions please ask.

This is my WE glock 17 with mini red dot sight. The gun shoots well and had 1 gas tight mag. It comes with all the original fittings and rear sight. £100 including postage, fees etc. Chronod with WE green gas and 0.2g bbs in a very cold room. You need ukara to buy this.

S&T metal mini m203 style grenade launcher. £50. It's ris mounted but does have one of the barrel mounting sections and it's missing the the front latch that you'd need to barrel mount it. You can still RIS mount it fine. Shells now SOLD. (M4 not included)

All in good working order. Prices include postage fees etc. Nuprol short dot 1.25-5x26. Good condition. A bit of rust on some mount screws. Illuminated reticle. Very minor damage to the front of the scope (on the metal scope tube) £65. SOLD SOLD Standard red dot with red tinted glass. £15. Standard red dot with mirror finished glass. £15 SOLD Mini red dot. £20 Compact Richter optic 4x32 AOIR (adjustable objective, illuminated reticle). £35 Cvlife acog-like 4x32 compact scope. Illuminated reticle. This is pretty much new in box. £40 SOLD Cheers

SOLD. TM g18c has a guarder gen 2 lower. The rest is stock. It did have a 2 tone lower gen3 before it was swapped for the guarder. If you look very closely you can see evidence of 2 tone on the take down lever. It shoots very nicely. With the guarder frame fitted the front of the slide looks like it's just 0.5mm behind where it should be on the frame. This does not affect function of the pistol. £95 WE g17 shoots fine. Some wear on the muzzle from holster use. Comes with a brand new mag. £75 KWC 1911 (Dan wesson Valor). Another former 2 tone but blue paint is only visible where the sights meet the frame. Very snappy shooter. Fps tested with a fresh co2 bulb but some gas excaped when I fitted it. The first 2 3 shots will likely be over 350fps which isn't uncommon on these. £75 KJW plastic M9 with silencer which is a barrel extension. Shoots 265fps without silencer and 290 with it. This is basically unused. £45 All prices include postage and fees. You need ukara or defence to buy these. Chrono was done with WE green gas and 0.2g bb in a very cold room.

The Cyma Ak cm.028 works fine, it just missing all the furniture. Wired to deans. It's cycles very nicely and has a very consistent fps. £40 posted. SOLD The JG mp5 (plastic) is mostly complete. It has a new fire selector. It was missing the mag release paddle. I bought an src one which doesn't fit. It could be modded to fit maybe. The gearbox cycles fine. £30 The mp5 is missing the integrated silencer. The ICS BLE BM9 light strikes. The first few shots shoot fine at 275fps green gas 0.2g but after that the slide does not go far enough back to chamber the next bb. It's better in the summer and on red gas. But it's still boneyard. Has a new maple leaf macaron hop rubber and a gas tight mag. Ukara needed for this as it's still a rif. £45