Daveoc33
-
Posts
328 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Daveoc33
-
This advert is COMPLETED!
- For sale
- Used
This is my TM m92f. Good condition. It's the fixed hop version but shoots very well with 0.25g bbs. On a 0.2 it's around 285fps. It comes with 1 leak free non-TM mag. I think it's a WE mag. Shoots fine and locks back on empty. I'm after £55 including postage. You need a valid defence to buy this please.£55
- GB
-
Does anyone know how to modify a scorpion evo to shoot semi only? The only way I've seen to do it is to install the jefftron leviathan mosfet. Is that the only way?
-
Discounted asg scorpion evo carbine in firesupport. It's wired to deans so I'm guessing it's the 2020 version. £249 including postage https://www.firesupport.uk/asg-scorpion-evo-3-a1-carbine-m95-aeg-airsoft-rifle.html
-
You may have more luck selling the main gun as a skeleton kit (no stock or handguard) and sell the other bits separately. You could try for £1k for the skeleton kit and you could knock the price down depending on interest. Just reread your description and you've done stuff to the lower. Perhaps more than £1k depending on what the extras cost. Best of luck with selling it!
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
This is the handguard only. I'm after £40 including postage.£40
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
This is my 13inch silencer for the krytac kriss vector. It comes with the barrel extension needed for fitting. I'm after £45 including postage for this.£45
-
This advert is COMPLETED!
- For sale
- As new
I've got 3 G36 mid caps and 1 hi cap. I'm unsure of the brand but they could be jg or battleaxe. You can't trust the mag connectors on these (I'm not sure you can on any G36 mags). One of the male connectors has snapped off (it's included as you could repair it) and the female connectors are easily pushed inside the mag shell. They feed and work fine. I used them with a novritsch G36 and JG SL8 before I sold these rifles. I'm after £20 including postage.£20
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
I've got 6 mid caps and 2 hi caps. The mid caps I thing are king arms (see photo of the markings) and hold over 100bbs. They are TM and JG compatable according to evike. One is slightly coming apart are the top (see photos) but I'm sure this can be glued. I'm after £25 posted for all 6. These other 2 are JG hi cap magazines. I'm after £15 posted for these.£25
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
This is my we hi capa 5.1 dragon. It shoots fine at 280fps with green gas on 0.2g bbs. This was 3 degrees outside when testing it. The side can sometimes. The slide does often not lock back in empty. It can do when you use a mag with a strong bb feed spring but the slide release has developed a little indent which holds it in the down position. A new slide release or just filing it down a bit will fix it. The paint is a bit worn on the outside. I'm after £65 collected or £70 posted£65
- GB
-
This advert is COMPLETED!
- For sale
- Used
I listed this here before but the guy didn't pay for it so relishing. This is a JG Vz61 skorpion aeg / aep. It shoots around 240fps on a 0.2g bb. I used this as a sniper sidearm for a game day but that's it. It comes with a high cap mag, an aep battery and tm adapter so it's fits in the Vz61, and charger (2 pin charger). It has the threaded outer barrel fitted but comes with the non threaded one as well. I'm after £65 collected or £70 posted.£65
- GB
-
This advert is COMPLETED!
- For sale
- Used
This is my boneyard jg g3 sas. It shoots but the gearbox sounds slow on a 7.4v lipo. I wonder if it's shimmed too tight or the motor is weak. I've not been inside this to take a look. Could be something else of course. It shoots a consistent 315fps with 0.2g bbs. When I tested this just now it shot full auto in semi, but when I set the selector just slightly above the semi position it shot on semi again. And now in the proper semi position it shoots in semi again. Not sure what that was! It is missing the stock pin for the sliding stock and the flash hider. I'm using a cable tie to hold in the sliding stock at the moment. The externals are in very good condition. I'm after £50 collected or £60 posted.£60
- GB
-
They are my local shop. Never had any issues with them. Friendly staff. I'd recommend them myself
-
Ordered some wires from ak2m4. They will definitely be fine for this and a lot cheaper than PB
-
You could try contacting kyairsoft. The oem of the canik pistol is armorer works and kyairsoft are the official parts retailer for AW and for WE (kind of the same company). But if it's just a pin then a roll pin may be perfect for the job as Tackle says
-
You can find it on android if you tap the 3 vertical dots on the top right of chrome and tick "desktop site". Not massively helpful I know but it gets you there
-
I need to rewire a v2 gearbox with a perun hybrid fitted. What wire do people use for this? I can see patrolbase do 2m of silver coated wire for £13 but I'm betting you can buy the same / similar thing from b&q at a fraction of the cost.
-
The "Share A Bargain" Thread Discussion section Only
Daveoc33 replied to clumpyedge's topic in General Discussion
Defcon have a few bits on sale too: Some lct aks. -
Specna M4 metal upper/full Reciever wanted plz
Daveoc33 commented on Dodgyback's advert in Parts & Gear Wanted
I have a suspicion that these are the same oem as specna. Someone on here may know for sure but for £32 for a metal receiver set it's a pretty good deal think. https://www.patrolbase.co.uk/delta-armory-receiver-set-for-m4-ar-15-aeg -
Sounds like a good price to me!
- 1 reply
-
- 1
-
-
This advert is COMPLETED!
- For sale
- Used
£18 including postage. Used for 2-3 game days then I sold my tac41.£18
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Baby desert eagle non blowback. I bought this as a boneyard ages ago and I can't remember what is wrong with it. Comes with 1 mag. £25 including postage£25
-
This advert is COMPLETED!
- For sale
- As new
JG scorpion aep in very good condition. I used it as a sniper sidearm on one day and it was perfect for that. Cycles well and comes with 1 aep battery and adapter and charger. It has the silencer adapter and standard barrel too. Comes with 1 hi cap mag. I'm after £65 collected or £75 posted.£65
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
This is my JG g3 sas. It's missing it's stick pins but the stock is held in place by a cable tie for now. Externals are in really good condition. Fps is at 325 on 0.2g bbs. It cycles OK if slightly slow on a 7.4v lipo. Comes with 1 hi cap mag. £75 collected £85 posted£75
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
WE split slide hi capa. A bit tatty and could use some attention but it shoots and cycles OK. Comes with gas tight mag. £65 collected or £70 posted.£65
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
We glock 17 gen 3.a bit work but shoots OK. Could use some attention. Got this for a project but need the money instead. Comes with 1 gas tight mag. £65 collected or £70 posted. Chrono at around 280fps£65
- GB
