Jump to content

Hunka1988

Members
  • Posts

    73
  • Joined

  • Last visited

  • Feedback

    100%

Profile Information

  • Guns
    G&P Stubby Killer, Krytac CRB, G&G TR4 CQB-S, TM HI CAPA 4.3, TM M&P9, TM KSG, BAR 10
  • Sites
    The Mall, The Bunker, Iron sight

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Hunka1988's Achievements

  1. Have you tried venting as you fill? Briefly hold the knocker valve vent the gas and any air that has built up
  2. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • As new

    Having seen a really easy mod for the MTW of replacing the stock contact screws to brass ones to increase consistency (the stock painted ones can cause deviations). I ordered some. They only come in packs of twenty.... These are 2.5mm in diameter and will cut thread in the plastic. Really easy to install sub a minute. I have 9 pairs. £3.50 per a pair posted.

    £3.50

    Reading - GB

  3. @Steveocee I believe you posted a vid about a mini mamba setup. You had a longer barrel running out the front. Did you ever put in a shorter barrel? And if so what sort of velocity were you getting? I'm struggling to get over .5 joules with green gas. 84mm 6.02 barrel. Be interested to see if it's a discrepancy my end or the limits of that length of inner barrel.
  4. Hiya, There is a banner on their website that says they are in America and that there will be delays. On the MTW user group they are pretty well regarded. Ash
  5. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • Used

    For sale is stock MTW hop unit with ASG 6.03 brass barrel 208mm, silent industries 1.0 arm and g&g green bucking. Hop arm has been shimmed so there is no lateral movement. The small part of the unit where the c clip is inserted crack this has now been epoxied and is solid. Happy to show a video before sending. It's about £65 in parts with hop arm itself being over £20 posted. Asking for £35 posted.

    £35

  6. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • Used

    For sale is a complete hi capa 5.1 stainless upper. It was cycled maybe 100 times before I replaced it with a custom upper, but due to running an sas kit it has got some wear as pictured. Would make a change for anyone running a black capa to give a two tone look. Hop and barrel are unmolested so it has the that wonderous marui performance. £50 posted.

    £50

    Reading - GB

  7. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • As new

    For sale are two rhop patches One ZCI and One PDI 6.05. They are made by elvishtac who is a prominent seller in patches priding themselves in their quality. These are sold in the US and postage to the UK is about £20. Tenner each posted.

    £10

  8. This advert is COMPLETED!

    • For sale
    • Used

    For sale is a used Polarstar kythera. Perfect engine for those getting into HPA as it's purely mechanical no need to set dwell or fcu settings etc. In theory (gearbox compatibility dependent) this setup is a drop in HPA setup. With it being mechanical this is semi only which lends itself to being in a dmr build. It has had the .019 metering screw put in (nightmare to get hold of). The trigger system has been set up for reduced trigger, works really well with the included Maxx trigger. I've put it into a spare VFC gearbox, this is the gearbox Polarstar are designed around. Also included is the amped grip line which has a nice thick weave. Annoyingly polarstar don't ship with ready to go lines. I haven't done it before taking the pics but I will also chop down the spring guide and set it into the gearbox. In its current setup the charging cable will run into the buffer tube. Pair that with paracord that I can include, and it be hidden away by the stock. The cable got nicked with one of the threads splintering, cable is absolutely secure but the bloody wire is sharp! I've covered it with electrical tape to stop it catching skin when installing. The only thing I would change is the gearbox screws. These have come out of spares box. Might be worth whoever buys it spending £3 from ak2m4 and getting some new ones. The engine itself is retailing for £320-£330. That doesn't include the £25 grip line. Trigger is about £25. The metering screw with postage is £20 (p*ss take) and the gearbox will set you back £20-30. All in all its about £450 in parts of you were to buy new. Plus you don't have to mess around with setting the screws for the best trigger pull! For reference I had it paired with a 285mm PDI barrel, maxx m4e hop unit and a maple leaf macaron (old style not super). It was giving a FPS deviation of 1-2fps. I've recently cleaned it all out reapplied tech salve to the o rings so it's ready to go.

    £300

    Reading, Berkshire - GB

  9. This advert is COMPLETED!

    • For sale
    • Used

    Here we have a massive package *cough* A wolverine gen 2 reaper in an Cyma AKS74u body. The reaper has only just been upgraded so may have about 3000 rounds through it. It also comes with a Bluetooth fcu which provides control through an app for Android. The setup currently internally is the reaper, stock hop, 70° maple leaf, 3d printed shallow concave nub, polished ZCI 248mm barrel. This setup means you can either run a flash hider or have a functioning suppressor. The reaper is deadly quiet when paired with a suppressor. It is also insanely quick capable of 35rps. I've modded the trigger trolley to reduce trigger pull and over travel. This does mean it won't engage to safe. I disconnect my hose when not using to prevent issue but if buyer wishes I can remove the mod. As a bonus I will include a M4 nozzle so all you need to put it an ar body is a trigger unit. Externally you have a plethora of choice as can be seen in the photos. Currently it has a 5KU pt1 stock, b11 handguard and foregrip pre chopped to assist ak reloads, PBS suppressor (foam filled), standard grip and optic mount that attaches to the sights. But you also get a choice of a triangle stock, 2 more grips, 2 more ways to mount optics andd various flash hiders. Also included is the externals for an e&l AKS74u. I'm going to say it's 95% complete as I haven't put it back together since I took it apart. Included are more triggers and various other bits. There is also 8 midcaps and one high cap. The mid caps are a mix of capacity. The large pineapple ones are 250, pts looking ones are 200ish and the plain ones are 150. There are two bits that are cosmetically a bit rough but function fine. The lever for the handguard snapped. The rod itself is still there and retains the handguard but you need to use a screwdriver or similar to turn it. The second is I originally installed a Union hop unit which required modding the outer barrel and removing the mag assist. The hop just wouldn't play ball. I epoxied in plastic to replace the metal removed and returned the mag assist. Fully functioning but worth pointing out. It's a really great rif and is different from the standard black M4 that is prevalent. The hpa unit with fcu and a spare nozzle is just shy of 600 on it's own. Plus the externals, extra rif and mags it's closer to £1200. I will include the red dot if the offers are sensible. Given the size of the package it would be collection only or I can meet within 40 miles of Reading with a tenner for fuel. Any questions let me know. I don't have a firing video to upload but if requested I can get one done. I'm after a sale but....if there is an MTW forged going I would be more than happy to have a discussion.

    £700

  10. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • Used

    Here is a an Evotek Evo which has been serviced yearly since upgraded (last done 2022). Inside you will find an ASG 30k boost, ultimate 16:1 gearset shortstroked, jefftron leviathan with Bluetooth connectivity, ultimate compression set (cylinder, piston etc), the bearings have been replaced with jcaged steel ezo bearings rather than ceramics that were prone to exploding. Also has the bearing spring guide and CNC trigger. PDI 208mm inner barrel with prommy purple that has been flathoped. Also has an airtech hop wheel. Externally it comes with a tracer adapter, yetiwurks mag release, miniature foregrip, madbull ace stock, Evo buffer tube adapter. Also included is 3 midcaps (more are available if wanted to be purchased separately), Odin adapter,a DZ tactical pouch which is tailor made for evo mags, I've then made mag retainers out of kydex. With the quick change spring the FPS can be varied in about a minute but I've got it at about 330 and it is insanely consistent. The rate of fire is about 33rps. It has a hair trigger mod, so sensitive I've made the semi a safe mode to prevent accidental firing. An absolute cqb beast. Rough prices below when you total up. Not including some of the smaller items Evo £350 Evotek upgrade £250 Jefftron £100 PDI barrel £75 Buffer tube adapter and stock £120 External accessories £50 Pouches £40 For collection. Open to offers

    £450

    Reading

  11. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • For sale
    • Used

    Here is a an Evotek Evo which has been serviced yearly since upgraded (last done 2022). Inside you will find an ASG 30k boost, ultimate 16:1 gearset shortstroked, jefftron leviathan with Bluetooth connectivity, ultimate compression set (cylinder, piston etc), the bearings have been replaced with jcaged steel ezo bearings rather than ceramics that were prone to exploding. Also has the bearing spring guide and CNC trigger. PDI 208mm inner barrel with prommy purple that has been flathoped. Also has an airtech hop wheel. Externally it comes with a tracer adapter, yetiwurks mag release, miniature foregrip, madbull ace stock, Evo buffer tube adapter. Also included is 3 midcaps (more are available if wanted to be purchased separately), Odin adapter,a DZ tactical pouch which is tailor made for evo mags, I've then made mag retainers out of kydex. With the quick change spring the FPS can be varied in about a minute but I've got it at about 330 and it is insanely consistent. The rate of fire is about 33rps. It has a hair trigger mod, so sensitive I've made the semi a safe mode to prevent accidental firing. An absolute cqb beast. Rough prices below when you total up. Not including some of the smaller items Evo £350 Evotek upgrade £250 Jefftron £100 PDI barrel £75 Buffer tube adapter and stock £120 External accessories £50 Pouches £40 For collection. Open to offers

    £550

    Reading - GB

  12. This advert is COMPLETED!

    • For sale
    • Used

    Tokyo Marui MK23 partially camo wrapped. Comes upgraded with a crazy jet barrel, hadron tdc plate, h plate, maple leaf bucking (autobot I believe). Also comes with two mags, the stock suppressor (hush quiet), 3d printed suppressor (never used so can't speak to it's effectiveness), 3d printed 16mm to 14mm CCW adapter, 3d printed carbine kit (cracked at rear but has been fixed with epoxy), 3d printed rail with picatinny (needs a bolt). Of course comes with the case. It's a couple of years old so the usual wear and tear is present. But functions flawlessly. Fires really well, Is near silent bar the hammer when suppressed, lifts .45s and above (don't do it you can see the pennies flying away...) Only selling as it doesn't get used. Happy to hear sensible offers. Ideally collection otherwise posted at buyers expense with tracking etc.

    £170

    Reading, Berkshire - GB

  13. Thanks Pete. I found Lambda a bit hit or miss with the quality of the window. Hopefully these are better.
  14. I've seen these for sale in a few places but there isn't a great deal about them online other than people dropping their name on Reddit, with nothing to support if they are good quality. The background sounds eerily like lambda with a founder having been at PDI. They appear to have a larger window which is useful for the larger patched hop rubbers. Anyone got any experience?
  15. THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • Wanted
    • Used

    Hello, I'm looking for an M4 PDW either the ARP556 or Krytac PDW. Ideally it would come with a stock extension. Just after the RIF, no need for mags and optics etc. Looking at the £180-£250 price range depending on age, spec etc Thanks

    £250

    Reading, Berkshire - GB

×
×
  • Create New...