Charlie36

Has anyone got a fix for a Guns Modify P Mag MWS that only takes about 2 seconds of gas before stopping itself filing up anymore and then only shooting 5-10 BBs before running out. I have held the green gas can against the filler valve for 20 seconds and get almost no gas inside the mag. There are no leaks either?

Has anyone got a fix for a GM P Mag MWS that only takes about 2 seconds of gas before stopping itself filing anymore? It shoots about 5-10 BBs before running out of gas, even though I have held the gas canister against the filler valve for 20 seconds

Hi, does anyone know the right type of HPA tap valve I need to convert the green gas GK Tactical 400rds drum magazine for TM AKM?

i bought the same URGI MWS and did very similar mods and had the exact same problems. it is because the hop-up adjuster is moving and therefore getting caught on the bolt as it fires forward for each shot. This then turns down the hop wheel and your bb’s gradually go lower and lower. As another user has posted, you need to re secure the screw that holds the hop-up adjuster wheel. It’s where the gas block tube starts inside the upper receiver. I thought I had broken this part when taking apart the URGI to change the hop-up rubber and bought the Guns Modify metal hop chamber and hop adjuster. However i wouldn’t spend £60 until you’ve tried the above.

Hi all, thanks for your help. I heated the G45 up in the house and it worked perfectly through 3 mags. Metal slide pistols on green gas really don’t like temperatures below 5 degrees.

Bought a new VFC Glock 45 and it only fires bb’s on every other shot/cycle. I have tried multiple mags and the issue persists. Any help/suggestion welcome.

Bought a new VFC Glock 45 and it only shoots bb’s every other cycle. Any suggestions? Have already tried multiple mags.