Asomodai

BTP really is a cool pattern all things considering!

Gonna have to grab a sturdy belt then. Though 50% of the amazon reviews claim the sizing is small and to grab the next size up.
 
cheers!

I might actually have just enough for a Type 97 though which one i am unsure. Plus an A&K M60 LMG next month. Just need to get a few more pennies. 
 
Jacket cost 22quid in large. The trousers were size 38 waist for just £13 on eBay, reduced for a limited time. Its now my second uniform as I only have one currently! Sorta needed to happen!
 
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F253007784782

I’ve just picked up a set of kombat BTP Black my self , got a baseball hat , ubacs and combats , all from fleabay as well . Have to say for the price it’s not bad quality at all , the ubacs is nice as the body is a Tshirt sort of material .👍

PTS Magpul PDR-C. Second hand but looks in very good condition. Slightly apprehensive about the dual stage trigger, but hey, its a rare and discontinued bullpup for a decent price. I couldn't say no. 

Kombat UK BTP full uniform. Hopefully the sizing is right. 
 

 
45 degree rail adapter to attach a torch on my scope rail only rifles
 
FMA helmet picatinny rail. 

PTS Magpul PDR-C. Second hand but looks in very good condition. Slightly apprehensive about the dual stage trigger, but hey, its a rare and discontinued bullpup for a decent price. I couldn't say no. 

Kombat UK BTP full uniform. Hopefully the sizing is right. 
 

 
45 degree rail adapter to attach a torch on my scope rail only rifles
 
FMA helmet picatinny rail. 

PTS Magpul PDR-C. Second hand but looks in very good condition. Slightly apprehensive about the dual stage trigger, but hey, its a rare and discontinued bullpup for a decent price. I couldn't say no. 

Kombat UK BTP full uniform. Hopefully the sizing is right. 
 

 
45 degree rail adapter to attach a torch on my scope rail only rifles
 
FMA helmet picatinny rail. 

Picked up the 7mm ball bearings for the MG36 project and the Real Sword Type 97 picatinny rail for whenever I get a Type 97 (It was only 7 quid)

Bunch of parts from @ak2m4
 
These are for my MG36 build. Where there is a X2, means one of them is going to my ARX160 which already has upgrade parts ready to go in, just need the last pieces of the puzzle. 
 
SHS (RA) G36 Cylinder Head Aluminium
Acetech AceMOS Plus Mosfet X2
SLD High Torque Motor 22TPA (Short)
SHS (RA) Stainless steel Cylinder (4/5Hole) X2
ZCI Piston head (8 Vent Aluminium)
SLD 14 Tooth Piston (Lightweight)
ZCI Gear Set (Advanced) 16:1

Bunch of parts from @ak2m4
 
These are for my MG36 build. Where there is a X2, means one of them is going to my ARX160 which already has upgrade parts ready to go in, just need the last pieces of the puzzle. 
 
SHS (RA) G36 Cylinder Head Aluminium
Acetech AceMOS Plus Mosfet X2
SLD High Torque Motor 22TPA (Short)
SHS (RA) Stainless steel Cylinder (4/5Hole) X2
ZCI Piston head (8 Vent Aluminium)
SLD 14 Tooth Piston (Lightweight)
ZCI Gear Set (Advanced) 16:1

A real quality FC1 sight off of RocketDogBert. 
 
Its heavy for the size and perfect height for my three tan rifles which all have low scope rails. 

Bits for my MG36 build. 
 
ASG Ultimate M95 AEG spring. I like these as its a weak rated M95, so more like a M92/3? No chance of it being 350 FPS, but can be very close to. 
Prommy Purple bucking. 

Welcome to the JGMP5SD Club. Kinda wish I went with the fixed stock like yours though!

Welcome to the JGMP5SD Club. Kinda wish I went with the fixed stock like yours though!

New loadout on its way ! 🤦‍♂️
JG MP5SD6 
Cyma 226 AEP 
2 X Gotham PD patches .

Just got my new JG G36 through the post. Pretty sure it is a Gen4 as it has the JG Hop unit that has the feed tube on the Hop unit. The barrel length is only 263mm where it should be 509mm! 
 
Pretty happy to have it though for my MG36 project! Nice Nylon fibre body. 
 
 

Oh dear. Last one for a while (Honest!?) 
 
JG/Golden Eagle G36E Gen 4. This is for my MG36 build. Got it for only 105 euros.
Also picked up the only upgrade kit for the ARX160, Cylinder head, Piston head, spring guide and Air nozzle.  
Strap harness for my ARX as well. 
2X Cyma SVD High caps. 

No real problems. Had some work done and bought a pistol and pretty satisfied with both! Jon in there is very knowledgeable and friendly to boot. 

Out of stock but they are out there:
 
http://www.zib-militaria.de/epages/61431412.mobile/en_GB/?ObjectPath=/Shops/61431412/Products/90121&ViewAction=ViewProduct

Oh dear. Last one for a while (Honest!?) 
 
JG/Golden Eagle G36E Gen 4. This is for my MG36 build. Got it for only 105 euros.
Also picked up the only upgrade kit for the ARX160, Cylinder head, Piston head, spring guide and Air nozzle.  
Strap harness for my ARX as well. 
2X Cyma SVD High caps. 

Oh dear. Last one for a while (Honest!?) 
 
JG/Golden Eagle G36E Gen 4. This is for my MG36 build. Got it for only 105 euros.
Also picked up the only upgrade kit for the ARX160, Cylinder head, Piston head, spring guide and Air nozzle.  
Strap harness for my ARX as well. 
2X Cyma SVD High caps. 

Potential customs charge, further drops in the pound vs the euro etc. Confusion from individual stores about whether they can send it. Just want to get it in now then tempt fate. 

Oh dear. Last one for a while (Honest!?) 
 
JG/Golden Eagle G36E Gen 4. This is for my MG36 build. Got it for only 105 euros.
Also picked up the only upgrade kit for the ARX160, Cylinder head, Piston head, spring guide and Air nozzle.  
Strap harness for my ARX as well. 
2X Cyma SVD High caps. 

The last bits for my Well MB03
 
Airsoft Pro Cylinder Head (Straight)
Airsoft Pro Bolt handle (Black). 
 
Hope it all goes in!

Just arrived. Me likey a lot! 
 
Bits that you think are metal turn out to be Nylon fibre, bits you think are plastic turn out to be mild steel. Its odd! The mag is a bit tight to the pistol grip but I am used to that with bullpups. Overall I am dead impressed with the responsiveness on a simple 8.4NimH and 400 FPS consistency. It'll be a while til I field it though. Need to get more mags, lock off to semi, mosfet, sort the weak air nozzle, bucking and barrel. Might change the motor but the stock one is actually pretty good. Want to bump the FPS up to 420 to be my low powered DMR for certain sites. 
 
I am glad I didn't plump for the AY VSS or an AK (for now). Just love me a bullpup too much!