[G&G LevAR 15]

On 20/03/2024 at 15:34, The_Lord_Poncho said:

It would be interesting to know if those same sites have a ban on semi auto shotguns - in my head at least, just having three barrels sat right next to each other, discharging 3 shots with every pull of the trigger is no different. Certainly the scope for dishing out/receiving pain is the same!

This opens hell for debate - and no sites want it.

 

Personally I like the "old fashion" shotguns. 30 bbs in the shell and pump action. I see them fair - yup I can shoot 3 bbs at once 10 times before reloading and you can shoot me 500 times before I reload from your hi-cap mag.

 

if someone needs 50 bbs to hit anyone then paintball sounds like more suitable sport.

As someone that plays with GBBR, 1shoot 1kill has more appeal to me than spamming site with bbs. 

 

But hey ho it's my personal opinion     

[G&G LevAR 15]

On 18/03/2024 at 17:06, Krisz said:

I'm glad that G&G innovates at least but I'm more excited about their gas shotgun which eats AEG magazines.

 

 

And another one to be banned and all CQB sites - this is effectively burst fire. single barrel + multiple BBs = ban. 

[Tti tp22 experiences?]

Love it! Fixed barrel, TDC hop up easily adjustable, and rmr mount on fixed platform. Been using it in couple of games and performance wise it is similar to AAP-01.

If you on the budget get aap-01 if you like replica of existing real steel and prefer the slide blowback get TP22. 

I find the look of "Beretta and Glock baby" more over AAP-01 but it is personal opinion. 

 

One thing I noticed is that the TP22 likes heavy BBs - outside the UK they use 0.36 as preferred. I been using 0.32 and they are hopping well but lots of CQB sites in UK now limits the BB weight to 0.25g

 

Additionally you may find the attached diagram useful. It is showing which parts of TP22 are compatible with which platform for replacements (credits to TTI themselves for providing this). 

[Lambda Defence GHM9-G]

Our of the box the FPS are ridiculously low on mine (235 average on 0.25 and abbey predator red). Also the internals worries me. I.e. fire selector is nylon as I can tell and the firing mode position is held by a sharp end of a spring jumping into indents of the selector. This will wear sooner or later. 

I ordered londer barrel but I don't want to go too long and then it will loose its purpose as an compact smg if the total length will be of an average M4.

[Lambda Defence GHM9-G]

Already got nice stock ready for it waiting. Pretty excited to run Glock loadout only on some Chinese (I guess) video they were showing it hops .32! But take it with a pinch of salt right now as can have no clue what they were saying

[Lambda Defence GHM9-G]

I also decided to pre-order. Like the idea of using my we Glock mags in pistol and primary (for CQB). Will see how it works out if the box but in long turn I believe it will need longer barrel. I am most curious about the trigger mechanism and nozzle. How long they will last and how easy it will be to get spares. 

[Lambda Defence GHM9-G]

Hi All

 

I found this weird thing Lambda Defence GHM9-G on the internet and it looks very interesting. 

I was tempted with Maruyama SCW9 but it takes only VFC mags where this one seems to take WE/KJ/TM.

 

Is Lambda Defence a solid choice? have not heard of them as a manufacturer of replicas. 

Any views/opinions? 

[King Arms TWS 9mm GBBR]

How doe it treat you?

I am thinking about getting one. is it v2 with upgraded steel trigger box?

how's wear n' tear?

it the nozzle solid or should I get few replacements as well?

over all are you still happy with it after c.8 months? 

Thanks.  

[WE PDW rubber recoil buffer replacement]

yes, I ended up cutting it out of PU - if feels similar to G39 stock buffer so hope it will work. 

Also I made it bit higher to match the length of recoil spring end  cap as I have heard that because stock buffer is shorter if can cause recoil spring end cap to crack.

 

  

[WE PDW rubber recoil buffer replacement]

Ordered some rubber (65 hardness) and PU (60 hardness) was thinking about silicone pads (50 hardness) but worried that it would be too soft). Will update on results

[WE PDW rubber recoil buffer replacement]

Hi.

 

My rubber recoild buffer has crumbled and I need to replace it. Can't find any places online where this element would be available and even in the manual it is not specified separately.

 

So need to make my own.

Now what material could I use? 

 

Do you have any advice what easily available material I can buy to cut the recoil buffer? 

 

Thank you.

[Gun picture thread]

My little creation. Since I couldn't find the metal G&P rail kit I improvised to make M11a1 as useful as possible still maintaining slim shape (that is why there are no side rails).

 

Used it last weekend and it was cracking fun. 

 

It is bit of a ugly duckling and won't be everyone's taste but it works perfectly for me and it is Daddy's Lil Monster

[Cyma MP5 cm.041j high speed rear sling point]

Thank you for your replies. I'd did tak your advice @Hatchet and add a bit of electrical tape. Hope it will hold

[Cyma MP5 cm.041j high speed rear sling point]

Hi all 

Santa was kind for me and brought me Cyma Cm.041j MP5A3 high speed. 

 

Just getting ready for its first game and I noticed that the rear sling point seems to be weak. I was planning to use single point sling and when I hold the weigh of the replica at that sling point it is moving. 

 

Do you have any experience of this sling point at the sliding stock to fail? Or am I overthinking?

 

Thanks.

 

 

 

 

 

 

[MAC11 parts compatibility KWA <-> KSC]

Perfect - good to hear it. I'd better stock some consumable parts in that case while I can. 

[MAC11 parts compatibility KWA <-> KSC]

Hi there Hive Mind 

 

I am looking for some spare parts for my KWA M11A1 but is seems they are quite difficult to obtain in UK. 

After some googling I quickly discounted buying from KWA US as their shipping rate seems to be flat $77!!!! for a handful of parts. 

KWA HK sends me to other stores of which one Rainbow8 has all the parts I need BUT they are listed as KSC? KWA M11 is not listed at all only KSC M11

 

So my question is are the parts interchangeable between M11 made by KWA and KSC? 

I am looking for nozzle, nozzle return spring, hop up rubber etc... 

 

Thank you.

Cheers 

[What have you made?]

39 minutes ago, EDcase said:

Can you specify where you got the torch?

Cheers

 

I bought it from Amazon: RovyVon Aurora A1x

[What have you made?]

I was trying to buy smallest possible torch with integrated grip to use on pistols. I found one made by UTG but nowhere to buy anythere outside US. So I decided to make my own. The hardest part was to find smallest possible torch with instant on light and highest possible lumens. The one I got is a size of AA battery and has real output of 650 lumens. Not bad for such tiny EDC torch. Next step was easy with bit of help from thingiverse and my limited cad skills I manage to produce this it's tiny c.8x6cm!! tested on the game day and was better than expected perfect pistol torch with grip

[First time GBBR?]

Since you said you are open to other platforms let me recommend you WE G39c. This is working mule and fairly cheap one as well. Those replicas are easy to maintain and repair and have good opinion to be reliable. May be hard to get new (I managed to find one) but there are plenty second hand as well. In the world of m4 dare to be different

 

other recommendation will be WE Apache series (mp5). 

[Helmet/Mask Recommendations.]

Let me share with you my personal experience. I use mesh mask for couple of years now and I had no issues. There where few drawbacks like reflections from the sun making it more difficult to see outside but not a problem indoor. 

 

They during pandemic we played one game where we had to wear masks underneath and my glasses were steaming non stop. so I took of my glasses and play the round only with mesh mask. CQB site, sneaking on the dark staircase... To make long story short I got shot at close range in my face (not the first time and not the last) but this time unfortunately the other player or used low quality bb's or I was unlucky as the BB cracked on impact and few shards did hit my eye. Painful as hell. And I call myself lucky as it I have no permanent damage but this experience made me much more aware of risks.

 

Again if you wear glasses (as I do) then mesh mask is more than ok as long as you have this secondary protection level

 

p.s. couple of years ago I remember that one member of this forum has shared a pic of him in A&E with the BB shard stuck in his eyeball from similar accident I had. I believe he was ok afterward. 

[The "Share A Bargain" Thread]

This is pretty decent 1000lm torch made by WADSN. I use the same model and I paid more than this on Ali! 

IMHO this is good price for UK retailer.

 

https://www.socomtactical.net/wadsn-xh35-tactical-weapon-light/?utm_source=Socom+Tactical+LTD&utm_campaign=ad1225cd0e-EMAIL_CAMPAIGN_2021_10_06_05_30&utm_medium=email&utm_term=0_467430e2ce-ad1225cd0e-167312710&mc_cid=ad1225cd0e&mc_eid=7ca1f03aee

[What have you made?]

My first ever leather project. I wanted old fashioned flap holster for my shadow 2 with torch. Couldn't find one so I designed and made it been using it in few games already and is still in one piece. I call that a success

[G36 Faux Bullets Sticker Copy]

Hi all 

 

Does anyone have a copy of the sticker that was provided is some of the G36 mags with bullets on it? 

 

I would greatly appreciate pdf copy. 

 

There used to be for £2-3 on eBay made by FMA as well but they seems to disappear now

 

Thank you.

[Kings of Airsoft]

thanks all. you are confirming my worries. I thought that this may be some small local shop buy without any positive feedback I will not risk.

[Kings of Airsoft]

Hi all.

 

I am looking for first hand feedback for:

Kings of Airsoft

 

Did anyone purchase anything from them?Are they trustworthy?

How well they handle your order, communication and most importantly how they resolve issues if happens? 

 

Thank you.