mightyjebus

Something like this..........

to put it back to stock you need a new piston and a selector gear. The piston is dead but you can easily find a replacement (prometheus being a good choice). The selector gear looks to have been grounded out to play around with the AOE but to get the AEG up and running its best to get a new replacement. the whole gearbox needs a very good clean and re-lub to be honest. Once you have it back to stock and working then you can go crazy with the upgrades (replacing the trigger contacts with a Titan is highly recommended as the NGRS platform goes up an notch when you add a better trigger system). Also because the gearbox looks dirty I'll really check out the inside of the inner barrel and give it and the hop rubber a really good clean.

weirdly as I was reading this the set I bought on ebay turned up. I got the 36 waist set and it was a bit of a gamble but it paid off as the sizes are small and fit more like a 34. I thought 60 quid for a pair of Crye's was a pretty good deal also. Up close the camo reminds me of the estonia desert stuff. Just need to find a UBAC or shirt now

Turns out it was a special order for the UAE (Union Defence Force). rumour is there might be some G3 cut combat pants out there somewhere.

I've seen 3 labels: APR-UT1 - Combat cut trousers APR-UT2- Admin/Ops cut trousers APR-US1 Admin/Ops cut shirt I know there is a UBAC out there somewhere which will have another number. For anyone shorter and rounder than me there is a pair of Ops trousers on ebay right now for 60 quid

Thanks Mik, You didn't happen to find out anything about it? who, when etc?

Hi all, My Google-fu seems weak and I can't for the life of me find out anything about this camo. I know it's Crye Precision and the part number is a Crye part number but doesn't have a NSN associated that I can find. Anyone have any info on it? I'm guessing some soft of USMC trails MARPAT but that's just a guess.

Don't really seeing it being an issue. I ran mine yesterday and quite frankly it was awesome. It quite happily runs a 11.1V lipo 25C and the binary fire works very well.

ARES APC9. lovely firing little AEG. As with most Ares products a bit of TLC will make the most of it. Already sorted out the wobbly stock by replacing the 2 springs under the stock catch button and is now a lot better. inner barrel is only about 130mm and the stock rubber seems meh so I'll probably replace both of these soon. The bolt handles have a bit of wobble as well when folded so I'll probably replace the springs in them as well to keep them from rattling about when folded to the side. The mags are a bit stiff in the magwell but I think this will get better with use. The rubber bumps on the base of the magazine are a nice touch but I might bin them so that I can cram more mags into a M4 pouch. oh and the pin that holds the stock on, that you need to remove to fit a battery, is the tightest I've ever come across.

Blast from the past. It's STAR UMP that I've had for a while that needed repairs. The selector gears sitting between the gearbox and the lower receiver had snapped due to metal fatigue. Luckily they are the same as a CYMA G36 so I fitted a set and then fitted a Pico SSR which involved chopping the inside of the upper receiver so that it would fit along with a battery. Just when things were looking good the selector plate snapped but again thankfully it's the same as a CYMA G36 so a quick order to fire support and things are all working now. I might give it a run out this weekend if I can find the rest of the magazines.

For anyone interested Taiwangun have had a restock of the DE 904 models

Pistol from L3wisD, rails from TSAirsoft, RMR from Aliexpress and the torch I picked up in the states a while back.

I used the existing mag internals. You need to snap off 4 little tabs for them to fit.

TM HK416C with 3D printed stock pad as I don't really like the short stock pad that comes as standard.

Latest 3D print - MOLLE holder for Atom impact grenades. File can be found here: https://www.thingiverse.com/thing:4618298

designed, 3D printed then moulded and cast. Tokyo Marui NGRS EMAGS.

yup, anycubic photon

Designed and Printed a EMAG for TM NGRS rifles.

Picked up a AA12 but quickly got sad when I couldn't find any decent (or decently priced) accessories for the AA12. Since it will be used in CQB then a torch is a must so I knocked up a mount in Sketchup and printed on my Anycubic Photon.

Ruger 10/22

bought this with a few issues. Replaced the bevel gear, replaced the motor with a 25k one and fitted a Titan along with a bearing spring guide. shoots very well now and will get a run out this Sunday. Cosmetically replaced the boot stock and the only stock I had floating around was the green one but doesn't look to bad in my eyes.

looks like a version 7 but you would need to put them side by side to confirm.

just got it. I'll be using it in anger this weekend so will have a better idea by then. First impressions is it is rock solid. It's quite snappy on a 7.4 stick Lipo and all 7 mids and the hicap I got with it work ok. Slight issue when changing mag as the first shot after changing mags double feeds but that might just be the crap BB's I'm using. It is easily hopping .28g BB's, doesn't weigh as much as I was thinking it would and the only annoying thing currently is the front sling loop rattles about so I'll need to tape it up to stop it rattling. Externally it's very well put together but I can't comment on the internals yet as I haven't opened it up. One nice little touch from Acrturus is you get a spare pin retaining loop thingy just in case you loose the original.

VFC AKS74 and Arcturus Ak-12

Bought a broken SCAR L CQB recoil and after a bit of TLC it's back up and running. Upgrades are in the post. I'm toying with fitting the angry gun stock pipe but can't make up my mind on which stock to fit.