mightyjebus

first prototype of a new rail for my CZ58. adding more real estate for bolt on's

Probably the most overly engineered AEG ever designed. The G&G VSS Vintorez.

Picked up a couple of ACE1 ARMS PMAG's for my MWS. They seem good and the weight is 399g compared to the 453g for my Marui magazines. Tempted to swap out the 6 marui mags for another 6 of the ACE1 ARMS magazines.

What 7.62 mag pouch (or check rig) are you using?

Actually these are just printed on paper. You take the mag apart, the clear plastic piece pops out, stick them down with selotape, trim and re-assemble. I can share file I used to print on a normal paper printer if you want?

not sure if this really counts but printed out some bullet heads and fixed them to the inside of the AK12 magazine to improve the look.

I'm sure there used to be a "what have you 3D printed" page.....anyway, Tired of swapping chest rigs over when you switch AEG platforms?, fed up of moving pouches on and off your plate carrier when you switch from an M4 to a MP7. Well I know I was so I knocked these up. Slides into the M4 pouches easily and holds 2 mags each. The mags are held securely so when you remove one the other one isn't flapping about inside the pouch and falling out when you bend over. Right now I've got designs for TM MP7 GBB, AEG Kriss Vector and the ARP 9. I'll probably add the MP5 style mags next.

ASG CZ Bren 805 A2 - Leopold copy, Battle Axe battery powered Hi-cap, Gemtech suppressor and some random vertical grip

for people who don't have access to a 3D printer you can buy it here: https://www.shapeways.com/product/932C5DNMV/mws-part-b?optionId=210263416&li=shops £8.75 for one but that's not my price that is the Shapeways price so appologies.

part can be found here: LINKY I printed in PLA at 100% infill and it seems fine. You can try ABS or some of the fancy infused PLA's for added strength. Here's a comparison between the stock Marui and mine.

cause I'm awesome I just printed 1 out at 100% infill and tried it and it is a drop in fit. No issues as far as I can see and I'll stick a link up for thingiverse a bit later once I upload it.

Something like this..........

Don't really seeing it being an issue. I ran mine yesterday and quite frankly it was awesome. It quite happily runs a 11.1V lipo 25C and the binary fire works very well.

ARES APC9. lovely firing little AEG. As with most Ares products a bit of TLC will make the most of it. Already sorted out the wobbly stock by replacing the 2 springs under the stock catch button and is now a lot better. inner barrel is only about 130mm and the stock rubber seems meh so I'll probably replace both of these soon. The bolt handles have a bit of wobble as well when folded so I'll probably replace the springs in them as well to keep them from rattling about when folded to the side. The mags are a bit stiff in the magwell but I think this will get better with use. The rubber bumps on the base of the magazine are a nice touch but I might bin them so that I can cram more mags into a M4 pouch. oh and the pin that holds the stock on, that you need to remove to fit a battery, is the tightest I've ever come across.

Blast from the past. It's STAR UMP that I've had for a while that needed repairs. The selector gears sitting between the gearbox and the lower receiver had snapped due to metal fatigue. Luckily they are the same as a CYMA G36 so I fitted a set and then fitted a Pico SSR which involved chopping the inside of the upper receiver so that it would fit along with a battery. Just when things were looking good the selector plate snapped but again thankfully it's the same as a CYMA G36 so a quick order to fire support and things are all working now. I might give it a run out this weekend if I can find the rest of the magazines.

For anyone interested Taiwangun have had a restock of the DE 904 models

Pistol from L3wisD, rails from TSAirsoft, RMR from Aliexpress and the torch I picked up in the states a while back.

I used the existing mag internals. You need to snap off 4 little tabs for them to fit.

TM HK416C with 3D printed stock pad as I don't really like the short stock pad that comes as standard.

Latest 3D print - MOLLE holder for Atom impact grenades. File can be found here: https://www.thingiverse.com/thing:4618298

designed, 3D printed then moulded and cast. Tokyo Marui NGRS EMAGS.

yup, anycubic photon

Designed and Printed a EMAG for TM NGRS rifles.

Picked up a AA12 but quickly got sad when I couldn't find any decent (or decently priced) accessories for the AA12. Since it will be used in CQB then a torch is a must so I knocked up a mount in Sketchup and printed on my Anycubic Photon.

Ruger 10/22