MILITATED

More than 10 & less than 100
(I think but stopped counting months ago)
 
That is all I'm prepared to say on the matter

As cool as that stuff looks, don't think it'll be very practical. Not just from restricting movement but you'll bloody boil in it
 
I get warm enough in my WAS 901...

http://www.patrolbase.co.uk/airsoft-rigs-plate-carriers-assault-vests/8fields-tactical-replica-interceptor-body-armour-black.htm#.Vav4TIqkrCQ

You lot are sad....
 
Me on the other hand, I'm f*cking miserable
Playing toy soldiers ???
 
I am reenacting famous strategic and tactical battles
 
Yeah OK I'm playing toy soldiers

I was actually thinking of writing this but I thought nobody would have any idea what I was on about xD
Thank you.

Personally, I am 'addicted' to putting attachments on my gun. Of course, for practicality, but also because a gun with the right attachments looks incredible - to me, anyway. Admittedly, there are those out there who like to keep their attachments to a minimum and avoid the whole tacti-cool look, but who cares about that sh*t. Have fun with your gun, and make it yours! It is, after all, your gun.
 
If it were my gun, I would change the attachments, but that is just to suit me. I always find guns with a bunch of attachments more interesting.
 
A general guideline though: If your gun is becoming way too heavy, or is getting difficult to practically use, then you may have one too many things on your gun.
 
As long as you don't end up looking like the picture below, you'll be fine.

Missing the Tactical Spork!!

Standard AR15 Wrench.

Just clarifying the situation here sorry for the slight necro post. I'm JR0210 on Zeroin and we've sent messages back and forth after this situation the gun was seized by royal mail just making sure no one gets the idea I'm a scammer

Yeah the set I bought ages ago had 14 pieces, they were all black but 7 were metric, 7 were imperial. Obviously the only one missing was the one I really needed, but I found that today Anyway, all is well now and I am able to remove what I needed to.
 
Thanks for all the responses.

Ah yes, I saw one of these wrenches earlier. Guess it is going to be an unavoidable purchase Thanks for all the replies

Ah yes, I saw one of these wrenches earlier. Guess it is going to be an unavoidable purchase Thanks for all the replies

7/64" allen key comes out at 2.771mm to 2.8mm it is rounded up to
 
decent cheap imperial allen key set
 
or it "might" be a Torx, or a Torx "might" just grip it
 
bastid small tiny ar$e scews

Black Allen keys are imperial & silver Allen keys are metric so it's possible you need the silver ones

Get yourself a small set of Park tools allen keys, they have a better "Square" cut than the cheaper ones. If you completely screw the head up then you can but from Halfords a small kit (About £20) which can remove them.

Search for a Flyye OTV or Bulle OTV, These things are extremely warm, trust me I used one for a year. You wont keep the neck or Deltoid protectors on for long either as they are annoying and restrictive.

Can also confirm that this works, great tip =) Thank you very much, pmag clicks right in there now.

Glad it worked for you! Not sure why they're such a pain but hey, always a way around.

I tried this yesterday with one of my Pmags and I must say mate “ Legend “ even with my Pro-Win hop in which is an absolute nightmare with my Pmags this mod is brilliant and the pmag just clicks straight in no messing about.
 
Great tip and I like it

Yeah I thought that the mags would just fit which is why I was a bit confused at first. I thought it was the gun, but it had problems with a very common gun too. Ah well, all done now

Not got one but muchas gracias for taking time and sharing your findings
 
yup careful thought out mag modding for some AK's I have had to do
and tape on mag or in magwell - jeez the 416 needed a bit of that stuff for any mag I had to work
 
cheers again for sharing your findings

Just another update:
After the modification, the PMag fits perfectly into the G&G Raider every time without any problems - absolutely no wobble either, which is better than most of my standard mags.
As for my Blackwater, I probably have to modify the mag a little bit more (it catches after applying force, so I guess it just needs that extra bit of space to catch normally).
 
But yeah, those three little teeth things and the height of the mag catch hole were the problem.

And so I found another way in which this problem is actually fixed the problem was that the mag simply isn't going into the magwell enough, and so it isn't catching (that also means the mag won't feed). So here is what I've done:
http://imgur.com/qIcHmez
 
I simply cut half of that off, because it was blocking the mag from going further. The mag now locks into both the G&G and my King Arms, and actually feeds now. I put a bit of tape just in case there was any wobble (I always do it). Obviously you don't need to cut it, you can just sand it down or something instead but I worked with what I had at the time
 
Just in case anyone is wondering, the notch at the top of the mag has nothing to do with the modification to fit the M4. That was to fit an ACR which works
 
I will put up a guide in case anyone has this issue in the future.

Hello,
I recently had an issue with a PMAG and a few M4 platforms, and so I decided to make a guide on how I solved it.
The problem is that the PMAG doesn't reach far enough into the magwell, and so doesn't lock into place (meaning it will just come out of the gun and not feed). So, you have to modify the mag slightly which takes a few minutes. Of course, this doesn't happen with all PMAGS, but I have seen that a few people had this issue.
 
As you can see below, I have cut the area in the red circle by about half, which allows the PMAG to go deeper into the magwell. The mag now fits perfectly fine inside the magwell (of a G&G CM16 and a King Arms BW15 Carbine - these two have slightly different magwells which are angled, so this modification should work for you) and feeds fine.
 
Do not take any notice of the notch at the top of the mag - that was for an ACR.
The electrical tape is optional - it is there to negate any wobble (some guns have wider magwells).
Hope this is of some use. I personally love the look of these mags, so it'd be a shame to let them go to waste.
 

Hello,
I recently had an issue with a PMAG and a few M4 platforms, and so I decided to make a guide on how I solved it.
The problem is that the PMAG doesn't reach far enough into the magwell, and so doesn't lock into place (meaning it will just come out of the gun and not feed). So, you have to modify the mag slightly which takes a few minutes. Of course, this doesn't happen with all PMAGS, but I have seen that a few people had this issue.
 
As you can see below, I have cut the area in the red circle by about half, which allows the PMAG to go deeper into the magwell. The mag now fits perfectly fine inside the magwell (of a G&G CM16 and a King Arms BW15 Carbine - these two have slightly different magwells which are angled, so this modification should work for you) and feeds fine.
 
Do not take any notice of the notch at the top of the mag - that was for an ACR.
The electrical tape is optional - it is there to negate any wobble (some guns have wider magwells).
Hope this is of some use. I personally love the look of these mags, so it'd be a shame to let them go to waste.