All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- For sale
- As new
4x Brand New GM PMAGS V4 Super reluctant sale but my cars failed its MOT😭 so funds must be raised. Brand new only had them 2 weeks, all are v4 & will run perfectly, no issues whatsoever as you’d expect. I also have 3 spare tan cases which I’ll include if needed (for an additional £20) otherwise you’ll receive them in black. Job lot only. message on 07795357441 thanks!£225
-
Time Left: 6 days and 23 hours
- For sale
- Used
this is what is left of a donor gun I used for parts It would be good for someone wanting to convert to a more classical fixed stock with old school handguard the previous owner had done some extremely suspect mods so be aware! the upper has the dust cover fixed in place, the bolt rods and spring are not present so the cocking lever will not do anything. the lower has no working bolt release and the mag release appears to be adapted. internally parts have been grinded away (in image) the rear assembly appears to be in good shape, the selector moves crisply and the stock appears fine comes with the screws and fittings, inc the cool flash hider. hopefully this will be of use to someone postage + £5, Paypal only Cheers£40
-
Time Left: 6 days and 23 hours
- For sale
- As new
Almost new, in great shape. I have installed a longer handguard to recess the silencer which has room for a tracer. Comes with the foregrip and pts enhanced grip. Extended battery cover and original mid cap mag Great quality with maple leaf hop and inline mosfet. P&p is £15 via pf48 or i can drop off in the Manchester area. Payment via PayPal Cheers£260
Manchester
-
Cannonfodder reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Cannonfodder reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Time Left: 6 days and 23 hours
- For sale
- Used
Selling my pride and joy, unfortunately I don't skirmish it much compared to my other pistols, so selling this off to a good home. main upgraded internal parts are the CTM Lightweight bolt in gold, as well as a 200% recoil spring, results in a very snappy pistol. I've also added a semi only plate onto the bolt. Rest of the internal parts are stock. It does have some scratches on the top of the receiver which i've shown on the photos Externally comes with the CTM Wood grips which i've stained and varnished. Asking for £120 which includes postage and packaging + paypal fees Comes with one magazine£120
-
-
I added a disclaimer... COZ I'M NO WALTER lol
-
ButcherBill reacted to a post in a topic: What are you listening to?
-
Tackle reacted to a post in a topic: What are you listening to?
-
Colin Allen reacted to a post in a topic: The 'How Did Your Airsoft Day Go? Thread
-
Colin Allen reacted to a post in a topic: The 'How Did Your Airsoft Day Go? Thread
-
Colin Allen reacted to a post in a topic: What are you listening to?
-
Colin Allen reacted to a post in a topic: What are you listening to?
-
You are not Clem Cattini and I do not claim my £5.
-
Time Left: 6 days and 23 hours
- For sale
- Used
Selling this pvs7 - style device. I believe it's an ATN NVG7. The lenses and tube are in good condition, nearly unused. The lenses are free from scratches. The battery cap has been replaced with a machined one. The thread for the front lens assembly is damaged, but enough remains to assemble the unit properly. It just makes it slightly harder to reassemble. Tube inside is a Gen 2 EPM66G - C, with 1100 minimum FOM. It has a couple of smaller blemishes that don't show up too well in photos, I have circled them. There is is some sort of indicator LED dot visible on the right edge of the right side. You can barely see that edge in use. There is a spec of dirt visible on the edge in the left eyepiece, hard to see. Comes with a 3d printed adapter to dovetail (might need some extra filing to fit your mount), daycap, eyecups. I've removed the retaining clip for the eyecups to make them easier to attach / detach. Comes with a plastic rhino mount as a freebie. Tube photos appear slightly washed out to my phone camera but are fine in person. You can see the same model of tube in another device here - https://youtu.be/DZ0feQ2GOP4?t=8 Payment via PayPal or bank transfer.£680
, Hampshire - GB
-
Colin Allen reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
Was that long ago I had to go looking for a Womble called Bungo, was new to me LOL
-
- Today
-
-
-
Time Left: 6 days and 22 hours
- For sale
- As new
Clearing out parts ahead of a house move. 3d printed Scorpion Evo front end. Rail at 12 o clock and MLOK slots at 3, 6 & 9 o'clock Used but no damage, have been impressed with how robust the build seems to be. £10 Price includes PayPal g&s fee and Evri postage£10
- GB
-
-
So True, 'THERE'S ONE BORN EVERY MINUTE' LOL
-
Time Left: 6 days and 22 hours
- For sale
- Used
For sale is my basic attempt at a short barrel L1191 for running cqb. A good few years old now and used indoors only but in overall good condition. Please note, there is a small crack in the lower receiver LHS near the trigger housing after it was dropped in a game. It has been repaired and repainted as can be seen in the pics. £200 PayPal G&S including delivery with parcel force and 2 hi caps. Defence required for sale. Build based on the following: -Cyma platinum etu V2 gearbox with m100 spring (sourced from sixmm) rear wired to deans - new replacement 18 months or so ago -Cyma metal receiver (no trades / unmarked) -Basic charging handle with cut down AngryGun ambi latch -ZCI (I think) 6.02 x 285mm tightbore steel barrel -Maple leaf super macaron green bucking -cyma platinum metal hop up -repro storm grip -repro magpul asap sling plate -circular handguard cap (sourced from sixmm) -xm177 style stock with l119 style butt pad -repro AFG -repro lancer style magwell -m4 sight post with sling mount cut off -generic M4 ambidextrous mag release catch -1x red dot repro ACOG -standard M4 AEG stock tube, castle nut and delta ring.£200
- GB
-
-
Time Left: 6 days and 21 hours
- For sale
- Used
WE AK 105 conversion GBBR + HPA Externals: -5ku Sport 1 Kit -MOE AK+ Grip -Airsoft Artisans MCX Stock on 1913 adapter (screw for stock is stripped but probably can still be removed i just cba) -LCT 105 FSB, RSB, Gas Tube, Lower Handguard Retainer, Railed Top Cover. -WE AKM Barrel cut down to 105 length. - 5KU DTK-2 - Asura dynamics PK5 -3D printed PETG Carbon fibre RK-0L - rubber Basis rail covers Internals: -NPAS Valve - WE Recoil Buffer -Hephaestus steel FCG -6.05x330mm Barrel -Mapleleaf Rubber -New recoil spring and recoil guide rod Comes with: -4x 545 gas mags (some shells beginning to split but work fine- nothing some tape/ epoxy can’t prevent) -1x 7.62 for spares (valves used as donor for HPA adapter -no shell) -AirTac HPA low profile adapter -5x Cyma 545 mags -speed loader adapter Built like a tank with heavy recoil, especially on HPA, gas piston has been modified to work with LCT gas tube. Currently set to 350 fps on 105 PSI. £580 ONO, welcome to collect in Chigwell or buyer pays postage£580
- GB
-
coolpedro3334 joined the community
-
So long story short. bought this slide kit https://www.landwarriorairsoft.com/product/pts-syndicate-airsoft-zev-g17-prizefighter-slide-kit-for-leupold-dp-pro-10119 had it fitted by my local tech and shoots great, now time to fit a dot on her. so after double checking it has a Leupold delta footprint. bought this dot https://www.patrolbase.co.uk/novritsch-micro-red-dot-sight-v2 as it states fits Leupold delta. anyway. It’s just a tad too long and won’t fit to the slide, as zev iron sight is in the way. Any help would be much appreciated, plate adapter links, 3d print help, anything at this point or the dot will go back/sold and she’ll have to stay naked.
-
No officers found by his name in Wiltshire either.
-
I just don't understand why you'd come to an airsoft forum who has a brilliant classifieds and ask us to give links to another platform
-
Scott Clark left Positive feedback for MichaelParkInBum
-
Today was just one of those days for me. Played half the day at Worthing and then me and my friend left at lunch due to gun issues. The day itself was mostly good, with good hit taking, though the marshalls did have to collect everyone together to go over a few issues that happened (full auto up close and people removing eye-pro in the gameplay area) and the only real issue outside of these that were dealt with was some pretty rampant spawn-camping in the long game before lunch. Temperature was perfect too, a bit colder than it has been, but still probably between 18 - 20 celcius. We were dropped off today, as the guy we usually go with has had his car break down and I'm still a few months off from my test, so I packed light. Went with the hawaiian shirt today as the flannel was too invisible last game day and I needed to up the ante, so a bright hawaiian shirt was the pick, with my usual not-jeans and Aliexpress belt kit and chest rig. Only brought the one gun and one pistol, as I didn't want to leave any of my rare stuff lying about the safe zone; I have never heard of anyone having stuff nicked at Worthing as the community is pretty great there, but I don't want to take the chance with pre-ban Tanakas and other not-so-common gas rifles, so pretty much everything I had with me could come out into the gameplay area. The one gun was one of my MWSs, the mk12 mod1 that I ran last game day and was flawless all day, alongside my TM p226 as a sidearm. Since then, I haven't done anything to it, so it should be fine, right? Well, it was not fine. My MWS for whatever reason wasn't pushing the bolt all the way forward. I tested it on all 7 short mags I had with me and when I put the mag in, pulled the charging handle back and released it, it went almost all the way forward, but stopped short, not feeding a BB into the hop unit and therefore venting the whole mag when I pulled the trigger. A very kind bloke offered me his regular length MWS mags and while I could get a shot or two off with those, by the 2nd or 3rd shot it did the same thing, bolt not going all the way forward and then venting all the gas. So that was that, my MWS wasn't working at all. This meant that me and my very obvious hawaiian shirt had to go out in the morning with just my pistol; on the plus side, I definitely looked the part of "some CIA guy about to go shoot up a drug den in Cuba" as one of my mates put it, and I do love looking the part as a filmsim enjoyer, even at skirmish games. Fortunately, my p226 was functioning flawlessly, but I wasn't looking forward to how I was going to have to play. Especially when I saw that there were about 10 ghillies on site today. Anyway, first game was a king of the hill style game around the tower base. Rather than post up where I normally do with my sniper rifles and DMRs, I went full-send. First game I managed to get all the way up the side, taking cover in a spot where I could pick people off on a flank. Spent most of the game bouncing around there until I was finally taken out, but got some great kills with the pistol. Then we swapped ends and I went full-send again, running up to the same spot to stop the enemy team from doing what I did in the last one. One of the enemy ghillies went all the way around the other side of the site to come in behind us, shooting my friend and one other of our team until I burst out, running across and shooting at him. I don't think I hit him, but I caused him to have to move enough and caused enough commotion to where some of the rentals turned and hosed the area with full auto and someone got him. I then medic'd my friend back in, so I'll call that a win. Second game was... difficult. Because we had won the first game on both sides, we had the challenge of taking a stretcher to 6 different areas of the site, having to hold the areas for 10 mins with the stretcher before moving onto the next. We started at the bottom of the site and got to our first objective quite quickly. Had some of the ghillies try and harass us, but we just pushed through quickly and got to the base, then moved off before they could really do anything. Second objective was difficult, at the top of the hill that we were at the bottom of. This was challenging, as their spawn wasn't too far away and wasn't down a hill like ours was, so when they identified where we were with the stretcher, it became very difficult to push it. However, we managed it with some great aggressive play by half of our team; a group of regulars and a family of rentals. Dad, mum, and either both their kids or their kid and his friend, but there were 4 of them and they absolutely got stuck in, helped us with the stretcher and played their absolute hearts out, so massive respect to them. Once we had that objective, the next base we had to get to was... right outside the enemy spawn and this is where the gameplay completely broke apart. We were still having to respawn at the bottom of the hill and the enemy team had a very, very short walk from their respawn to the objective so it just became impossible to push. After I got hit carrying the stretcher, I pushed up aggressively after I respawned in, running around and making the dug in people have to worry about multiple angles which helped get them taken out. We almost got the objective, despite it being right next to the enemy respawn... until we got shot in the back. What we found after this was that the enemy team were sending a lot of people into the very dense part of the site and using that to basically spawn camp us on the hill. I saw at this point a lot of people had given up, because they were going down the hill, spawning, going up a tiny bit and just getting shot. I don't know if anyone reported it to the marshalls, but with only a few minutes left I made one last hurrah along one of the flanks, taking out two people with my pistol before the game ended. It was a real shame for me today, as I really needed a good day of airsoft after work has been a pain in the ass the past few weeks (on a project that is like pulling teeth at the moment...), but with the MWS not working and having to run around a very dense woodland site, against an enemy team with at least 6 ghillies, in a bright hawaiian shirt with just a pistol was... not ideal and got very frustrating. Even with just a regular 1J rifle things would've been a lot easier, but accurate pistol shooting out to 40m+ is very difficult, even with real ones that have way better ballistics than our toy guns, so I was struggling today. On the plus side, my Earmor m31s were really good. Haven't worn them in a while, but figured I'd give them a run as I always use a headset in games like Tarkov or Gray Zone Warfare, so I figured I should use them in airsoft, and the difference was noticeable. Not so much with footsteps (a little bit, but not *that* much), but what it was amazing for was helping me pinpoint where people were shooting from which was a massive benefit. Oh well. Two weeks to wait until the next one, and depending on how it goes with my friend's car will dictate whether I need to start running my Vietnam kit, as I want to make sure that works before the September 'Nam game if we even make it there. I know he'll be gutted if he has to miss the September 'Nam game as he's an older gentleman and doesn't know how many more years he has to play, but with his car acting up and that only being a month away, we might not make that either. I won't have a car until about October (test is in December), so I can't even lend him mine as it'll be a month too late
-
Why would you want to go to WhatsApp groups for classifieds, they're shite & full of chancers who will turn you over & then block you, with no support network other than paypal, who can be meh sometimes when it comes to rif disputes.
-
I don't recall this forum listing or advertising those Whatsapp groups. Perhaps you should refer back to the Discord or FB chats that more than likely listed them?
-
Why would anyone want to donate??? What a scumbag, always looking for handouts.