All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- For sale
- Used
Hi all I sold my PTW a while back so all of this is up for grabs. 4 x 20 round mags 2 x real steel mag shells modified to take the PTW internals PTW inner barrel and hop, Tac modded from memory £75 all the other parts I’ll throw in for free£75
-
Time Left: 6 days and 23 hours
- For sale
- Used
Hi all I sold my PTW a while back so all of this is up for grabs. 4 x 20 round mags 2 x real steel mag shells modified to take the PTW internals PTW inner barrel and hop, Tac modded from memory £75 all the other parts I’ll throw in for free£75
-
Tackle reacted to a post in a topic:
Marksmanship
-
Jacob Wright reacted to a post in a topic:
The 'How Did Your Airsoft Day Go? Thread
-
Time Left: 6 days and 23 hours
- For sale
- Used
Full rail action for front end fo fit AK Endless options with this set up as can use it all or just sections . Comes with all fixings u need and loads of ris keymod rails to add on£55
-
ButcherBill reacted to a post in a topic:
The 'How Did Your Airsoft Day Go? Thread
-
I use a second hand Garmin fenix 4(?). it’s got hardened steel bevel and gorilla glass. Survived the last few years fine 😊
-
MistakenMexican reacted to a post in a topic:
Airsofting Wristwatches
-
ButcherBill reacted to a post in a topic:
Viva Arms in the UK
-
ButcherBill reacted to a post in a topic:
Viva Arms in the UK
-
Time Left: 6 days and 23 hours
- For sale
- Used
As title says legit 10” outer barrels one for mws one for ngrs £30 each for those L119A1 or L119A2 builds£30
-
ButcherBill reacted to a post in a topic:
Gun picture thread
-
ButcherBill reacted to a post in a topic:
Programmable mosfet
-
ButcherBill reacted to a post in a topic:
Programmable mosfet
- Today
-
Repeated for emphasis. With a V3 gearbox, the trigger tabs protrude outside, so you can just solder the trigger wire onto them. I fitted a Perun AB++ to a G36 V3 without opening it. You will have to do a bit of soldering though. The only zero-effort solution is to pay a tech.
-
johnnyj reacted to a post in a topic:
Gun picture thread
-
I'm the opposite I want the cover open with a real looking catch 🤣 , I'm sure I have a cyma a1 full upper and it has a gas tube I will try and dig it out
-
Have you got any inks you’d recommend?
-
Time Left: 6 days and 22 hours
- For sale
- Used
As tital says Brought second hand on impulse and never used lol Yukon mini osprey . Lovely scope . Powered by two AA batteries that last ages Clear picture . Has adjustable red cross recticle. Perfect for rusfor loadouts but fits any 20mm riz down to 11mm as adjustable Gen 2 tube IR light with on switch Comes in carry case with slr attachment too£410
-
Sandbagfiller joined the community -
It would be amazing if some of the new people would use the SEARCH function before posting the same question as the last 20 threads on a particular gun.
-
You need an NPAS in the nozzle to adjust the output. The adapter will need a minimum of 100psi to get an N4 to cycle well.
-
Soupy joined the community -
Hello, wondered if anyone could assist me. just bought the n4 new and the airattack HPA kit mag kit and I was having issues for about 4 hours. We had to have it below 70PSI because it would be over by 40 with 0.25bb’s but when lowered it, it would cause it not to shoot. After we fiddled around with it we got it shooting but every so often I would go to shoot and it would just dump my ass multiple times.the mag adapter is alittle bit wobble but not sure if that’ll affect it I’m not sure how to resolve this issue.
-
Time Left: 6 days and 21 hours
- For sale
- As new
72 pattern sas vest reproduction made by Auax military. Very good copy but has just sat unused so needs to go. £150 posted. mags not included.£150
-
This is something that annoys me greatly and the reason I don't do gun reviews, it's not really a representative review of the gun if that's all you have the space for
-
Time Left: 6 days and 20 hours
- For sale
- As new
Used but in very good condition. Holds GBBR zero as it was mounted on my MWS.£40
-
Time Left: 6 days and 20 hours
- For sale
- As new
Never used. Were bought for a project that didn’t went through. This will fit MTW .308 as that was the project. 15£ each but im open to reasonable offers for all 3. Price is for each mag.£15
- GB
-
Talk me into/out of buying a novritsch pistol
Rogerborg replied to Ryfoolz's topic in Guns, Gear & Loadouts
Like an AAP-01? Like, an AAP-01, man. Actually the AAP-01C Shinobi. What does your AAP not do that you'd want it to do? Mine has a Maple Leaf rubber, and a [checks emails] Maple Leaf barrel as well, mostly just because I had an extra 1cm or so to play with after adding an adaptor and tracer unit (indoors) or loudener (outdoors). It's not laser beam consistent, but it rarely produces a wild shot. Given the fixed slide, a DIY TDC mod would be my next port of call: just drill, measure - oops - just measure, measure, drill, tap, and grub screw.- 1 reply
-
- 1
-
-
Don't forget half the video being taken up by a history lesson on the real version of the rif
-
Time Left: 6 days and 20 hours
- For sale
- As new
For sale is a brand new 7” multi-position bipod in black. This is a copy of the ACCU-TAC BR-4 G2 bipod which sell for over £300. It has a tiltable function enabling you to rotate the mount base from side to side and compensate for ground that is uneven up to 25 degrees. The spring loaded legs can be folded forwards and backwards independently in 5 different positions by pulling down and rotating, with 5 height adjusters from 7 to 9 inches, these pull out then spring back when the leaver is pressed. Full aluminium construction apart from the rubber feet and the polymer tilt arm/sling adjustment knob. Compatible with all sling studs or you can buy a picatinny adapter for about £7 from Amazon and Ebay. Very solid construction and the legs are solid in all positions unlike others I’ve seen where there is lots of movement. I have 6 remaining for sale. All come bagged and boxed and I’ve opened them all to check they are 100% working. £25 each posted. Please note that the date is now a year old but I still have 3 of these for sale. I've sold 12 of these and please see my feedback, 100% satisfaction on this and other forums. Will take a photo with an updated post it note if interested.£25
-
I signed up to some porn sites with the User Name HaVoC_MaN. If you know, you know...
-
This advert is COMPLETED!
- For sale
- Used
For sale TM 416 NGRS DELTA FDE upgrades by eagle 6 Leviathan mosfet Leviathan Adjustable trigger deans mod M95,spring installed , fps upgrade pts pistol grip installed Ctr Stock , will include 2x batteries that go in the buffer space a angry gun socom supressor and 4 prong flash hider included and hand stop comes with original crane stock and 416 pistol grip with box£400
-
Finally we can all complete our Gloria from lock stock and two smoking barrels loadout! 😎
-
Time Left: 6 days and 18 hours
- Wanted
- Used or as new
Looking for a TM AKM nozzle - MGG9-116, if anyone can help me out?NO VALUE SPECIFIED
- GB
-
Makes me laugh when I see reviews of guns and a big negative they say is this isn't ambidextrous so I wouldn't purchase this gun, even though I only shoot r/h but I'll still pull this gun down. It's like come on do your research on a particular platform and you'll know before hand that the rs isnt ambi. (Yes I'm talking about the l85).
