All Activity
- Past hour
-
Probably a bit old but here's our two cents. The WE SMG8 (MP7) is a bit of a dog. Its a very old platform that has a lot of potential issues. I bought mine second hand for dirt cheap and for good reason. Knowing what I was getting I researched it thoroughly. Here's some of the problems I encountered just getting it to perform OK: The mags aren't great, even new it barely holds enough gas for a full auto mag dump, they are fine on semi but for me, this was supposed to be a back up to my insane TM MWS DMR so full auto was kind of the point. the mags are also painted in cheap paint. they flake almost immediately, I bought a spare mag for £44 quid and that started pealing with in a few games. The bottom plates are also terrible, the only hack there is for this is electrical tape...... The latch for the stock is terrible and doesn't last long. The sheer kick of the gas blowback loosens it to the point where it doesn't keep the stock in place, expect to replace it. Expect a £15 quid replacement The stock pinholes on the inside will break, expect to buy a new plate - tbf, TM, VFC & WE have back plate problems in some way or another so it appears to be universal. You can get replacements but they are around £50 quid depending on where you go. Hop up rubbers are hard to find, i ended up cutting a 9 ball to make it fit as it didn't quite align properly. The quality of the metal on the extendable stock isn't great, they wear and bur easily. Don't use cheap BB's - I used some for testing and the bolt return is so strong it literally mashed them. These were .20's from Kinetic. I put .28s from rebel in there and they held up. There's a great review from french guy on Youtube who did a review after 1 year of owning one. Granted its a decade old but it resonated. All complaints above aside, it kicks like a mule and is terrifyingly loud. the price in comparison to the others is marginal so do yourself a favour and spend the extra 50 quid and get a better one. Hope this helps. The Dads @dadsdoairsoft
-
c-more try not to look incredible on every single firearm challenge: impossible
-
pyromancer6 reacted to a post in a topic:
Gun picture thread
-
Lozart reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Dads Do Airsoft joined the community -
ruskitseller reacted to a post in a topic:
GHK Glock 17 Gen 5 now in at HPA U.K.
-
Huh.. that's not the advert i posted. In fact, i didn't even see that. I posted a Marui SCAR for 1,200. 🤔
-
Bespoke have them at a marginally better £199...still a bit high for me.
-
Galvatron reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Time Left: 6 days and 23 hours
- For sale
- As new
Fully working with electronic recoil L119a1 build comes with sight and peq Can also include mags if needed (midcaps) Postage Available£250
-
Time Left: 6 days and 23 hours
- For sale
- Used
For sale is Nuprol mid cap Pmags 30/120. one missing a baseplate so included as a spare£55
, Kent - GB
-
Added a 3D Printed Diemaco Style C8 Tri Rail courtesy of @Jez_Armstrong so the C-more can sit flush on the top rail without a riser to clear the DBAL, which I'll be looking to sell and replace with a tan PEQ15
-
Time Left: 6 days and 23 hours
- For sale
- Used
Ghk aks74u gen 2 circa 2016 so none of the bad QC issues Hephestus Steel trigger set everything but the hammer which I was told is strong enough Maple leaf crazy jet barrel with maple leaf hop and rubber Custom Adjustable nozzle for fps adjustment so you can play indoors if you want, this also makes for better gas efficiency than standard 5 leak free mags all recently serviced Only small issue is the front sight post has the smallest bit of play ,no more than any other ak74 and does not affect gun in any way , gun was greased and serviced regularly and works great£650
Strabane - GB
- Today
-
Time Left: 6 days and 22 hours
- For sale
- Used
As per the pictures of this listing the price includes: Tokyo Marui Stubby foregrip NGRS spec trigger guard (unbranded) Tokyo Marui A2 pistol grip Tokyo Marui Crane stock Tokyo Marui NGRS three position RSA with a QD sling swivel It's this one: https://www.firesupport.uk/tokyo-marui-rear-sling-adapter-rsa-for-recoil-m4sopmodtm416delta-ngen-next-gen.html I've uploaded a picture that shows this item on a gun that picture is for demonstration purposes only so you understand how it looks installed PayPal fees Royal Mail Tracked 48 postage£35
Leeds
-
novioman reacted to a post in a topic:
S/H guns at full price plus
-
Rollade reacted to an advert:
We XM177 "Gordy" build
-
LMKipper reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
LMKipper reacted to a post in a topic:
Lambda Defence GHM9 Thread
-
Rollade reacted to an advert:
WE APACHE MP5 GBBR
-
andrey reacted to an advert:
Boonie packer Redi mag
-
He is Leez in disguise and I claim my £5
-
£750 new though. Technically, TECHNICALLY, he's not entirely taking the piss. PB on the other hand, they ARE taking the piss.
-
Time Left: 6 days and 21 hours
- For sale
- As new
Fully working and in decent condition Looking for cash or swap for sniper. Shoot me any offers£120
-
Time Left: 6 days and 21 hours
- For sale
- As new
Fully working and in decent condition Looking for cash or swap for sniper. Shoot me any offers£120
-
So in my example of an ICS SIg 551 MRS where I bought it as New Old Stock and in basic testing I found it to be firing hot, the hop rubber had perished and I had to Model and 3D print in steel a proprietary part. Would this still not be considered "As New"? When selling stuff, you only get a "As New" and "Used" Option. "As new" by dictionary default is not Brand New, but it's closer to "Like New". So no warranty can be implied by "As New".
-
This advert is COMPLETED!
- For sale
- Used
WE APACHE MP5 GBBR Comes with 6 mags, 4 are gas tight, one that needs some maintenance gas and one needs a new knocker valve. Its got a crazy jet inner barrel and omega nub/maple leaf cold resistant rubber, original HK sling, a number of handguards and a ra tech NPAS fitted - £550, buyer will have to pay postage if required as the rif and mags are stamped steel so on the heavy side..... she slaps and will easily lift .32s. Happy to arrange collection/meet halfway. Bedford based. Videos of the rif shooting available£550
- GB
-
I know there’s already some pretty hardline gear being smoked by these Mack’s worthy sellers but this lad must be on some absolute Martian grade space dust to want 750 for that??!!
-
Time Left: 6 days and 19 hours
- For sale
- Used
Figured I'd post it here as well. Selling this gen 3 PVS7 in excellent condition. Fully cleaned out and ready to go. Has an MX10130D/UV, contr DAAB07-02-C-J010 tube inside. It's without any blemishes, the dot you see in the image is just from the low battery / IR illuminator indicator. It's much less visible in use (Mirrored on each side left / right as shown). Everything on the housing is marked cage code 13567 (ITT). Lenses are in good condition. Eyepieces (might just be demist shield?) have some small scratches but nothing to worry about. The battery retainer wire was damaged, so I removed it. Some wear to eyecups. Comes with sacrificial lens, skullcrusher, cool ITT branded bag, daycap, pads for skullcrusher, itar shoelace. Any questions, further pictures, etc, just ask. I have plenty of vouches on the EU Night vision discord server. I took some of the photos a few days ago. Price inclusive of postage and fees.£1,550
, Hampshire - GB
-
Time Left: 6 days and 19 hours
- For sale
- Used
Make: VFC Gun/Model: HK MP5K Accessories: 1 leak free magazine, optics claw mount, replica Surefire Ryder 9 suppressor and replica B&T suppressor. Both suppressors are tri lug style fit, but the front of the handguard prevents the B&T suppressor fitting securely. Surefire fits without issue. Also has the screw threaded muzzle device, with thread protector, so will accept screw on suppressors. Condition: Light use, very good. FPS: Gas and temp dependent. Splits/Swaps/Part Exchange: N/N/N Price/Payment: £350 posted Pictures: Attached£350
-
Matthew Ryder joined the community -
You're correct, they're not allowed here, in fact anyone who's found to be repeatedly selling new stuff, say purchased cheaply on Aliexpress & then immediately posting it here at a higher price is quickly banned. That's not to say that members can't ask whatever they want for items, or claim they're "new", but they need to be aware that they'll usually be quickly outed on threads such as Macks, or even on their own sales ads in the comments section, as you've pointed out, technically nothing sold here can claim new status if it's not accompanied by a full warranty & all it entails. All we do ask is that if your going to post on someone else's ad, please be polite, be constructive & maybe share a valid link to show their price is overly optimistic. If their response is negative, feel free to rip the 💩 out of them on Macks 🤣.
-
Time Left: 6 days and 19 hours
- For sale
- Used
can’t remember the brand of the chest rig, but has had a viper dump pouch attached below, crafted with agm and kmcs mesh for summer ghillie buyer pays postage£20
-
Time Left: 6 days and 19 hours
- For sale
- As new
Novritsch base amber ghillie, this has been custom painted and dyed to correct the colours for uk woodlands. about two and a half large crafting box or kmcs winter crafting kits, so plenty of material - about £150 of crafting material alone. one popper has come apart, but was always covered by a chest rig or holster buyer pays postage£125
-
Time Left: 6 days and 19 hours
- For sale
- As new
Used once, until I moved across to chest rigs, still super fresh and clean buyer pays postage£10
-
Keep seeing adverts on the forum for “Brand New Guns” often at full or even more than the retail price from dealers. A s/h gun can be as new, but it’s not brand new because the seller purchased it, it’s therefore s/h. Unless of course the seller is actually a dealer then it should come with warranty, able to be returned under distance selling rules etc. And I am not sure that dealers are even allowed to use the sales section on here.
-
Time Left: 6 days and 19 hours
- For sale
- As new
Viper plate carrier, comes with triple elastic m4 on the front and two m4 unbranded mag pouches on the back all molle buyer pays postage£15
-
Viper AK double pouches will take two mags in each pouch no problem.
