Syks Posted January 22, 2020 Share Posted January 22, 2020 Hi people, I have a g n g firehawk for cqb and absolutely LOVE it, im starting to get into woodland games now as well and even though the firehawk still performs amazing outdoors I think I would like to have a dedicated rifle just for woodland play. I have narrowed it down between 2 makes of rifle, either something from specna arms newest range that has a mosfet and quick change spring system...or....one of the cyma platinum range rifles that come upgraded as standard with mosfet also. Does anyone on here own either of these range of rifles? or has anyone played with both? how you find them? I just don't know which one to go for lol Thanks Link to comment Share on other sites More sharing options...
Jon199102 Posted January 22, 2020 Share Posted January 22, 2020 I have a Specna arms edge E-15. It's a good rifle with good range and for the price I can't moan. Mine did come with a FPS issue though and at the moment it's firing at 320 FPS on a m100 spring. Link to comment Share on other sites More sharing options...
EDcase Posted January 23, 2020 Share Posted January 23, 2020 Duno about the CYMA Platinum range but I have a few standard CYMA weapons and they're OK. I also have a Specna Arms EDGE SA-E03 which is one of my best shooting weapons so I can recommend that one... Had a quick look at both and the Specna seems quite a bit cheaper too. Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted January 23, 2020 Supporters Share Posted January 23, 2020 I'd go Specna Arms EDGE all the way. Bear in mind that if and when you come to sell up, CYMA is perceived as a budget brand. Their Platinum stuff might be full of cloned TM grade magic, but buyers are going to have to get past that branding. Link to comment Share on other sites More sharing options...
Heath Posted January 23, 2020 Share Posted January 23, 2020 Another vote for Specna. They're good for the price, mines shoots well, and the build quality on them is decent. Link to comment Share on other sites More sharing options...
ak2m4 Posted January 23, 2020 Share Posted January 23, 2020 I had a new CYMA Platinum arrive in the office last week. Externally it's very solid, the clone Magpul receiver is extremely nice as is the MLOK rail. Grip No creaks or wobbles. Chrono'd a little high at 370 but easily fixed. ROF was 20 on 11.1v. Decent enough HT motor. Not had a chance to open the gearbox, try the QD spring change or inspect the bucking and barrel. Overall extremely impressed for the price £160, got a broken EDGE coming in soon (bearing failure) so can give a comparison of internals. Bit too early for these CYMA's though, need to get more out in the field for a good workout Having handled and fired both I would go for the CYMA, depending upon how well the gearbox holds up. Didn't like the fact that the shortest version they do is a 10" Link to comment Share on other sites More sharing options...
SuckMySock Posted January 23, 2020 Share Posted January 23, 2020 Neither. Get Classic Army Nemesis from Weapon762 and ask them to downgrade the spring. Will be quite a bit better than both, externally and internally. Not sure about the externals of Platinum Cyma, but internals are Ok, CNC steel 13:1 gears, very basic mosfet (no AB IIRC), hi speed motor, steel tooth piston. Externals of the Edge are ok, internals are ok too. Mosfet is bit more advanced, but Edge suffers from poor compression. 1 hour ago, Rogerborg said: I'd go Specna Arms EDGE all the way. Bear in mind that if and when you some to sell up, CYMA is perceived as a budget brand. Their Platinum stuff might be full of cloned TM grade magic, but buyers are going to have to get past that branding. Same applies to Specna, they are known as budget brand Link to comment Share on other sites More sharing options...
Musica Posted January 23, 2020 Share Posted January 23, 2020 13 minutes ago, SuckMySock said: Neither. Get Classic Army Nemesis from Weapon762 and ask them to downgrade the spring. Will be quite a bit better than both, externally and internally. Not sure about the externals of Platinum Cyma, but internals are Ok, CNC steel 13:1 gears, very basic mosfet (no AB IIRC), hi speed motor, steel tooth piston. Externals of the Edge are ok, internals are ok too. Mosfet is bit more advanced, but Edge suffers from poor compression. Same applies to Specna, they are known as budget brand While I don't totally agree with you on specna range damn that is a good price for the x9! I did a lot of research on the ARP9 and X9 when I was looking for my first RIF and they both seemed really great options and that is still true. @ryaw know you have been looking at the x9 https://www.weapon762.com/smgs/2064-classic-army-nemsis-x9-aeg-smg.html?search_query=nemesis&results=3 I've only ordered kit from here before so not sure if RIFs make it. Link to comment Share on other sites More sharing options...
Syks Posted January 23, 2020 Author Share Posted January 23, 2020 Thanks for comments so far, these are the 2 rifles I have my eye on.... https://www.taiwangun.com/en/electric/cm-097b-upgraded-version-cyma?from=listing&campaign-id=19&fbclid=IwAR1KjIOmKo2UsYNM0HxAspP21A-ybcBPzS1Vy1dlL2Ai47uJ6fa9j89wZLM or this https://www.patrolbase.co.uk/specna-arms-rock-river-arms-sa-e07-edge-carbine?pv=9414&fbclid=IwAR1IlKykBmkBUE9HPQ6jEldmp2nf6R9T8ZANgkwGkFcjxfRf-Ah1QyUk_EI Will be ordering on Tuesday but im still in 2 minds which one to get lol the cyma just sounds great for the money but the specna arms also seems great value for money...things that matter to me most as this will be my woodland rifle are accuracy at range, and build as don't want to be changing anything in the rifle for as long as I can, ive only been doing airsoft for a few months so still quite new and not very tech minded Link to comment Share on other sites More sharing options...
Musica Posted January 23, 2020 Share Posted January 23, 2020 out of the 2 I would get the specna but I honestly know little about cyma and literally didn't know they had this platinum range until I read this thread. Make sure you do research on both so you can make an informed decision. Link to comment Share on other sites More sharing options...
ak2m4 Posted January 23, 2020 Share Posted January 23, 2020 14 minutes ago, Syks said: Thanks for comments so far, these are the 2 rifles I have my eye on.... https://www.taiwangun.com/en/electric/cm-097b-upgraded-version-cyma?from=listing&campaign-id=19&fbclid=IwAR1KjIOmKo2UsYNM0HxAspP21A-ybcBPzS1Vy1dlL2Ai47uJ6fa9j89wZLM or this https://www.patrolbase.co.uk/specna-arms-rock-river-arms-sa-e07-edge-carbine?pv=9414&fbclid=IwAR1IlKykBmkBUE9HPQ6jEldmp2nf6R9T8ZANgkwGkFcjxfRf-Ah1QyUk_EI Will be ordering on Tuesday but im still in 2 minds which one to get lol the cyma just sounds great for the money but the specna arms also seems great value for money...things that matter to me most as this will be my woodland rifle are accuracy at range, and build as don't want to be changing anything in the rifle for as long as I can, ive only been doing airsoft for a few months so still quite new and not very tech minded you should just buy both 🙂 one key feature of the CYMA is the ability to change the spring without having to remove the gearbox from the receiver. I think with this SA version you have to remove the gearbox to access the QD spring (check this). The QD motor grip get a few complaints on the FB groups and a fair few people reported spur gear bearing failure. SA does have engraved Rock River Arms license (whoever they are) 🙂 but engraved decent logo is a nice touch. Orion GB slightly better quality internal parts it seems, but something up with that bearing issue. Plastic rotary hop, you get 2x mid caps whereas only 1 mid with CYMA, 2 springs with SA only 1 with CYMA Link to comment Share on other sites More sharing options...
Syks Posted January 23, 2020 Author Share Posted January 23, 2020 If I had the cash I probably would buy both lol the specna does have a quick change spring so don't have to touch the gear box to change it, you do have to take the buffer tube off though which you don't have to do on the cyma, I asked a guy on youtube who has had the cyma for a few months what he thinks and he said he has put around 10 thousand rounds through the cyma so far and its still shooting like it did on day 1..... its a tough decision for me lol there isn't many vids of the cyma on youtube as its a fairly new rifle Link to comment Share on other sites More sharing options...
ak2m4 Posted January 23, 2020 Share Posted January 23, 2020 1 minute ago, Syks said: the specna does have a quick change spring so don't have to touch the gear box to change it, you do have to take the buffer tube off though which you don't have to do on the cyma you're getting a tad mixed up here, on the cyma you just remove the stock/buffer tube and unscrew - similar to the old style SA SAEC system. on the Edge I'm pretty sure you have to remove the gearbox completely from the receiver, not a tricky job but a ballache as you generally have to remove the motor, grip, upper receiver etc. If someone can confirm this on Edge please do. At Shot Show SA just announced there new Edge V2 model will have the SAEC system so guessing the current lineup doesn't have it Link to comment Share on other sites More sharing options...
Musica Posted January 23, 2020 Share Posted January 23, 2020 4 minutes ago, ak2m4 said: you're getting a tad mixed up here, on the cyma you just remove the stock/buffer tube and unscrew - similar to the old style SA SAEC system. on the Edge I'm pretty sure you have to remove the gearbox completely from the receiver, not a tricky job but a ballache as you generally have to remove the motor, grip, upper receiver etc. If someone can confirm this on Edge please do. At Shot Show SA just announced there new Edge V2 model will have the SAEC system so guessing the current lineup doesn't have it You are wrong about the Specna Edge quick change system. You remove the buffer tube then the spring guide nothing else. This is for the EDGE series there are specnas where you need to remove the gear box from the receiver but not this range. Could get our resident Specna buff @L3wisD to confirm but I think the Edge V2 has the system that doesn't require a long screw driver to get the buffer tube of or something. Link to comment Share on other sites More sharing options...
Heath Posted January 23, 2020 Share Posted January 23, 2020 1 minute ago, ak2m4 said: on the Edge I'm pretty sure you have to remove the gearbox completely from the receiver, not a tricky job but a ballache as you generally have to remove the motor, grip, upper receiver etc. If someone can confirm this on Edge please do. At Shot Show SA just announced there new Edge V2 model will have the SAEC system so guessing the current lineup doesn't have it You just remove the buffer tube and you access it through there. Link to comment Share on other sites More sharing options...
ak2m4 Posted January 23, 2020 Share Posted January 23, 2020 Thanks for clearing that up, good to see that both the Edge and CYMA have it - seems to be the norm now. Link to comment Share on other sites More sharing options...
Syks Posted January 23, 2020 Author Share Posted January 23, 2020 Thanks guys I thought so lol with the cyma you don't even have to remove the buffer tube, just slide stock off and unscrew the guide with long flat head screwdriver so even easier Link to comment Share on other sites More sharing options...
ak2m4 Posted January 23, 2020 Share Posted January 23, 2020 Just now, Syks said: Thanks guys I thought so lol with the cyma you don't even have to remove the buffer tube, just slide stock off and unscrew the guide with long flat head screwdriver so even easier yeah that seems the case, it's a nice touch if you don't have a castle nut removal tool, there wasn't one in the box but there's one pictured in the manual Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.