Reapur Posted October 10, 2019 Share Posted October 10, 2019 12 minutes ago, LEGXGPF said: Here we go... I am next with damaged buffer plunger... Check that half pushed out pin. Can it be the reason of the broken plunger? I have no photo but the end of spring was slightly deformed and pushed back into itself. Hope you underestand what I mean. Gun shooted 6-8k BB´s. I use propane gas. Can I buy all the new buffer (maybee metal one) or buy spacer from Dave SixG or something else? Thanks for advices guys. There are some pictures... Get the angry gun high speed buffer and never look back. Link to comment Share on other sites More sharing options...
Whisky1 Posted October 10, 2019 Share Posted October 10, 2019 7 minutes ago, LEGXGPF said: Here we go... I am next with damaged buffer plunger... Check that half pushed out pin. Can it be the reason of the broken plunger? I have no photo but the end of spring was slightly deformed and pushed back into itself. Hope you underestand what I mean. Gun shooted 6-8k BB´s. I use propane gas. Can I buy all the new buffer (maybee metal one) or buy spacer from Dave SixG or something else? Thanks for advices guys. There are some pictures... The exact same thing happened to me. My spring inverted itself at the forward tip too. So I replaced the buffer with a custom made one from SixG and installed a SixG spacer and a guns modify spring from the guns modify Complete spring set, which i believe is slightly stronger then the standard. Now it runs like a beast. Link to comment Share on other sites More sharing options...
Wo1f Posted October 10, 2019 Author Share Posted October 10, 2019 8 hours ago, Sawyer said: Didn't you want mine? 😂 Didn’t realise yours was for sale. I wanted a vortex strikefire ii and then I needed a rifle to put it on so I had to buy one😂 I’ve seen them break a few times. Thankfully there’s lots of options in terms of buffers. G&P make a cheap one that’s metal. Only one I wouldn’t recommend is the angrygun heavy buffer. It’s much too heavy and slows the cycling. Gives you loads of recoil, but that recoil is slow if that makes sense Sawyer 1 Link to comment Share on other sites More sharing options...
peeved87 Posted October 10, 2019 Share Posted October 10, 2019 Exactly the same as mine. It's obviously the weakest point. Got the replacement parts from Dave about to be installed. Will test this weekend. The original part lasted 1k bbs on green gas. Wolf at least you practice what you preach. Your influence affected my wallet Wo1f 1 Link to comment Share on other sites More sharing options...
Sawyer Posted October 10, 2019 Share Posted October 10, 2019 27 minutes ago, Wo1f said: Didn’t realise yours was for sale. I wanted a vortex strikefire ii and then I needed a rifle to put it on so I had to buy one😂 I’ve seen them break a few times. Thankfully there’s lots of options in terms of buffers. G&P make a cheap one that’s metal. Only one I wouldn’t recommend is the angrygun heavy buffer. It’s much too heavy and slows the cycling. Gives you loads of recoil, but that recoil is slow if that makes sense Well naturally, you can't have a surplus of optics! Wo1f 1 Link to comment Share on other sites More sharing options...
LEGXGPF Posted October 10, 2019 Share Posted October 10, 2019 29 minutes ago, Wo1f said: Didn’t realise yours was for sale. I wanted a vortex strikefire ii and then I needed a rifle to put it on so I had to buy one😂 I’ve seen them break a few times. Thankfully there’s lots of options in terms of buffers. G&P make a cheap one that’s metal. Only one I wouldn’t recommend is the angrygun heavy buffer. It’s much too heavy and slows the cycling. Gives you loads of recoil, but that recoil is slow if that makes sense Thank you Mr. Wo1f, I allready order Angry Gun Speed Buffer, New spring from Dynamic Precision for sure and send mail to Dave from SixG for HSB. I am very curious about that combination... Wo1f 1 Link to comment Share on other sites More sharing options...
Wo1f Posted October 11, 2019 Author Share Posted October 11, 2019 Interested to hear about buffer springs. I’ve changed them on other gbbr’s but I’ve not experimented with them on the mws. If you’re running green gas, a slightly stiffer one should be beneficial Link to comment Share on other sites More sharing options...
LEGXGPF Posted October 11, 2019 Share Posted October 11, 2019 4 hours ago, Wo1f said: Interested to hear about buffer springs. I’ve changed them on other gbbr’s but I’ve not experimented with them on the mws. If you’re running green gas, a slightly stiffer one should be beneficial I am not sure if spring is ok after that deformation and as you say that new one should be slightly stronger. I will refer how that combination work. Link to comment Share on other sites More sharing options...
in4lee Posted October 11, 2019 Share Posted October 11, 2019 Greetings from Hawaii. Here are two of my MWS's. Sawyer and EvilMonkee 1 1 Link to comment Share on other sites More sharing options...
Wo1f Posted October 11, 2019 Author Share Posted October 11, 2019 59 minutes ago, in4lee said: Greetings from Hawaii. Here are two of my MWS's. They’re beautiful. If you don’t mind me asking, how much were those kits? I’ve been trying to talk myself into one for weeks Link to comment Share on other sites More sharing options...
hunter511 Posted October 11, 2019 Share Posted October 11, 2019 Wait............ there's 416 kits available? In fact wait...... there's 3rd party bodies for these that are available without having to sell a kidney? Link to comment Share on other sites More sharing options...
Reapur Posted October 11, 2019 Share Posted October 11, 2019 8 minutes ago, hunter511 said: Wait............ there's 416 kits available? In fact wait...... there's 3rd party bodies for these that are available without having to sell a kidney? Yeah there's actually probably the most kits available out of any platform. The kits cost more than twice the amount of the base gun with no internals at all. So yeah a kidney is required. Link to comment Share on other sites More sharing options...
Wo1f Posted October 11, 2019 Author Share Posted October 11, 2019 10 minutes ago, hunter511 said: Wait............ there's 416 kits available? In fact wait...... there's 3rd party bodies for these that are available without having to sell a kidney? Without having to sell a kidney, no. The only 416 kit I know is over £1000 Link to comment Share on other sites More sharing options...
hunter511 Posted October 11, 2019 Share Posted October 11, 2019 Yyyyyyeahhhhh Given with spare upper etc I'm already over a grand into my MTR that's a pass. That said I'm surprised TM haven't dropped a MWS based 416 yet. The gold blinged MTR was I felt a touch weak as a reveal. Link to comment Share on other sites More sharing options...
Whisky1 Posted October 11, 2019 Share Posted October 11, 2019 http://www.modelwork615.com/shop/mwc-416d-std-conversion-kit-for-marui-mws-gbb/ Link to comment Share on other sites More sharing options...
Wo1f Posted October 11, 2019 Author Share Posted October 11, 2019 I just know the second I buy that Tm will announce a 416 mws for £500 Sawyer 1 Link to comment Share on other sites More sharing options...
Reapur Posted October 11, 2019 Share Posted October 11, 2019 50 minutes ago, Wo1f said: I just know the second I buy that Tm will announce a 416 mws for £500 Ain't that the truth 😂🤣 Wo1f 1 Link to comment Share on other sites More sharing options...
Sawyer Posted October 11, 2019 Share Posted October 11, 2019 1 hour ago, Wo1f said: I just know the second I buy that Tm will announce a 416 mws for £500 Hurry up and do it then so I can have a TM 416 GBBR! 😂 Wo1f 1 Link to comment Share on other sites More sharing options...
in4lee Posted October 11, 2019 Share Posted October 11, 2019 10 hours ago, Wo1f said: They’re beautiful. If you don’t mind me asking, how much were those kits? I’ve been trying to talk myself into one for weeks Thank you. The standard 416 kit was 900USD since it was bought on pre-order. The A5 kit was a little more at 1100USD. I believe RW sells/sold that kit. Someone had posted the link of MWC's website. I really like these kits and would recommend them. Wo1f and Sawyer 1 1 Link to comment Share on other sites More sharing options...
EvilMonkee Posted October 12, 2019 Share Posted October 12, 2019 Can I join the club now? Davegolf, Sawyer and Wo1f 2 1 Link to comment Share on other sites More sharing options...
Wo1f Posted October 12, 2019 Author Share Posted October 12, 2019 1 hour ago, EvilMonkee said: Can I join the club now? your membership is in the post Link to comment Share on other sites More sharing options...
EvilMonkee Posted October 12, 2019 Share Posted October 12, 2019 Going to keep it stock for now. Trying to hunt down some mags. Apparently Fire Support will have some in shortly Sawyer 1 Link to comment Share on other sites More sharing options...
Wo1f Posted October 13, 2019 Author Share Posted October 13, 2019 18 hours ago, EvilMonkee said: Going to keep it stock for now. Trying to hunt down some mags. Apparently Fire Support will have some in shortly Funnily enough I'm doing the same for my new one. It's always a good idea to get a performance baseline from the standard one before you upgrade it. That way you know if your 'upgrades' are actually upgrades. Fire-support are always a good shout for mags. They restock them relatively frequently and i think they're within a quid of the cheapest prices anyway. Link to comment Share on other sites More sharing options...
EvilMonkee Posted October 13, 2019 Share Posted October 13, 2019 What weight ammo for stock? Also which way is more hop on the wheel? Think its towards me? Link to comment Share on other sites More sharing options...
Guest Yukarin Posted October 13, 2019 Share Posted October 13, 2019 29 minutes ago, EvilMonkee said: What weight ammo for stock? Also which way is more hop on the wheel? Think its towards me? 0.25 or 0.28s Increase hop by pulling wheel towards you. Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now