Jump to content

LEGXGPF

Members
  • Content Count

    23
  • Joined

  • Last visited

  • Feedback

    N/A

About LEGXGPF

  • Rank
    AF-UK Newbie

Profile Information

  • Guns
    Tokyo Marui M4A1 MWS
  • Loadouts
    Multicam
  • Sites
    Private sites
  • Gender
    Male
  • Location
    Czech republic

Contact Methods

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. LEGXGPF

    THE TM MWS thread

    There is some info. But you are talking about new model with screw, dont have any info about that (only that G&P write something about using it only withlow pressure gas - 144a)
  2. LEGXGPF

    THE TM MWS thread

    Meantime than new parts arrives I have some pictures of my mk12 project: Mk12 kit with M16 stock and M3 scope looked so oldschool good: Harris style bipod, OPS silencer and KAC front sight I was so satisfied with result... But fell in love with some more compact scope and more tactical setup... I love that Grimlock gen II scope. Its usable for real .223 too.
  3. LEGXGPF

    THE TM MWS thread

    I will look on it. Thank you for advice. I am almost sure that is related to low temperatures (enviroment + gas freezing), because have that problem after shooting so many BBs (100-200 minimal) and teperatures goes down these days. Maybe frozen one of sealing parts? Now I waiting for new buffer parts. I focus on that nozzle thing when MWS will be ready.
  4. LEGXGPF

    THE TM MWS thread

    Hey guys, Im just find on youtube exactly same problem, which I have with my MWS. Its doing on lower temperatures after longer shooting... first shot is good, second do big noise and no bb came out and next shot is good again... Here is that clip: Any advices? Thank you PS: I dont use mag as a bipod like that girl
  5. LEGXGPF

    THE TM MWS thread

    I am not sure if spring is ok after that deformation and as you say that new one should be slightly stronger. I will refer how that combination work.
  6. LEGXGPF

    THE TM MWS thread

    Thank you Mr. Wo1f, I allready order Angry Gun Speed Buffer, New spring from Dynamic Precision for sure and send mail to Dave from SixG for HSB. I am very curious about that combination...
  7. LEGXGPF

    THE TM MWS thread

    Here we go... I am next with damaged buffer plunger... Check that half pushed out pin. Can it be the reason of the broken plunger? I have no photo but the end of spring was slightly deformed and pushed back into itself. Hope you underestand what I mean. Gun shooted 6-8k BB´s. I use propane gas. Can I buy all the new buffer (maybee metal one) or buy spacer from Dave SixG or something else? Thanks for advices guys. There are some pictures...
  8. LEGXGPF

    THE TM MWS thread

    I have just one mag... 😕 Need order some from Asia. It is doing from the first shot.
  9. LEGXGPF

    THE TM MWS thread

    No I dont. Just stock magazine with inserted o ring. (Maybe pressure in propan bottle is bigger than in green gas bottles?)
  10. LEGXGPF

    THE TM MWS thread

    Hey everyone. I have question on you. When I done some performance ugrades which is lead to +/- 490 FPS I sometimes have this Issue... When I fully fill the mag with propane, first few shots gas leaking out of the bolt/ejection port. Performace go down and rising with any next shot until gas stop leaking (this take 3-5shots). My theory: I upraded nozzle spring set, nozzle valve and rise performace a lot. It seems that shooting cycle is not completed in that cases, maybe stock springs in trigger not handle that pressure? Its complex system where you need some balance so maybe i have to upgrade buffer spring. Probably SixG HSB from Dave may help solve that problem? Thank you for your help.
  11. LEGXGPF

    THE TM MWS thread

    I have done it for the first time and I make it... I find these youtube video that maybee help you: And this is super usefull. Complete assembly and disassembly of TM MWS playlist. https://www.youtube.com/channel/UCNJaL5S8Y_3AHFd1nWMkqtQ Hope it help you to decide difficulty level of instalation these parts.
  12. LEGXGPF

    THE TM MWS thread

    I wait for kit and I will see. Yeah I am looking for the suppresor. But I have read a few posts about problems with compatibility between flash hiders and suppresors. Anyway I have to try it so yes, I am interested 😉
  13. LEGXGPF

    THE TM MWS thread

    Hello everyone, I want to share some MWS progress with you. After multiple reading of whole thread i decided to do some upgrades. First upgrade was ORGA LEX05 BARREL (371mm, 6,05mm)SixG nub and Modify tan Bucking - No so much FPS boost, but I was able to shoot heavier BB - Basic and most important upgrade. After that I decided to do some externals upgrades. I chose Magpul because I totally love it! This is result. I am so satisfied. Now it is performance boost time 🙂 Thanks to @Kayzeroth and his great performance post. I followed his experience and install folowing parts: G&P CNC Enhanced Nozzle Valve for Marui MWS ( 5.0 ) https://shop.jkarmy.com/g-p-cnc-enhanced-nozzle-valve-for-marui-mws-4-8.html Dynamic Precision Enhanced Sealing Buffer For TM M4A1 MWS https://shop.jkarmy.com/dynamic-precision-enhanced-sealing-buffer-for-tm-m4a1-mws.html Dynamic Precision Enhanced Nozzle Spring Set For TM M4A1 MWS https://shop.jkarmy.com/dynamic-precision-enhanced-nozzle-spring-set-for-tm-m4a1-mws.html This is results for me with green gas: The last upgrade was Airsoft Innovations GunGas propane Adaptor and with propane I get interesting FPS boost (but I lost by mistake photo with FPS and have only one with m/s but it is around 490 FPS Now I have a dream. Dreams name is mk12 MOD1. Its soooo beautiful. I want types used in Iraq and Afganistan by US forces... Something like that... So I need longer inner barrel, Scope, Harris Bipod, silencer and of course mk12 MOD1 kit. I discover graet copy of Leupold M3 scope and now its the first part that I have home. Its super cool. Mk12 kit is on the way I find some Monster MK12 MOD1 Kit for TM M4 MWS GBB with Fixed Stock from ModelWork Airsoft Bipod is easy to find. Many Harris style bipods are available. But I have some troubles with barrel. I have Orga and its great. Now I need at least 410mm. I want to try Prometheus but I dont find any longer than 370mm. Have you any advices which one should I use? I know that @Wo1f had his own mk12 project. Do you have some advices for me? I will update my progress and problems with building this dream build. In the end I want again thank to all great people in this thread who share their experiences and advices!
  14. LEGXGPF

    THE TM MWS thread

    FILL VALVE O-RING works great for me... I have absolutely no problem and dont care about material of gas needle. Its cost me just under dollar for 5 pieces. Try it. I have this ones, but its from my local shop... This one is similar: https://eagle6.co.uk/shop/catalog/product/view/id/3927/s/eagle6-airsoft-gas-magazine-entry-valve-o-rings-for-all-gas-guns/ I hope that it will help you
×
×
  • Create New...