hunter511 Posted August 17, 2019 Share Posted August 17, 2019 6 minutes ago, Boristhedriver said: Anyone heading to NAF next week? From experience I'm gonna say don't even bother trying to run anything with limited ammo there. Even the staff there have admitted to me it's pointless to run anything other than hi-caps. Back on topic a while back I was talking to someone on here about about acquiring a stock TM MWS inner barrel with an eye towards cutting it down. Link to comment Share on other sites More sharing options...
RossF Posted August 17, 2019 Share Posted August 17, 2019 1 hour ago, hunter511 said: From experience I'm gonna say don't even bother trying to run anything with limited ammo there. Even the staff there have admitted to me it's pointless to run anything other than hi-caps. Back on topic a while back I was talking to someone on here about about acquiring a stock TM MWS inner barrel with an eye towards cutting it down. If you’re looking for one, I have my stock inner tucked away in the packaging my tightbore came in. DM me if you’d like it. hunter511 1 Link to comment Share on other sites More sharing options...
Whisky1 Posted August 17, 2019 Share Posted August 17, 2019 2 hours ago, Boristhedriver said: Anyone heading to NAF next week? I was going to go but decided against it last minute, I have done it 3 years in a row and the first two years I got some great action and some amazing moments with my bolt action. But last year was such a shit show there was a mass of cheating, aggressive behaviour and just too many people for the size of the site. That being said the party's and meeting new people is always great. I will definitely go back in a few years but for now I feel it's just not for me, plus I'm going to book myself in for a day at south coast cqb on September 1st instead 😁 Link to comment Share on other sites More sharing options...
peeved87 Posted August 17, 2019 Share Posted August 17, 2019 I'm heading off there. Third consecutive year. High caps UMP last year, but will give the gbb a try. Besides, my drum mag should be ready then. Cut the mws mag shell and mill, then glue Link to comment Share on other sites More sharing options...
Boristhedriver Posted August 17, 2019 Share Posted August 17, 2019 I’m running my M4 alongside my m60 so I’ll have options. Keep an eye out I’m on ‘The Others’... Link to comment Share on other sites More sharing options...
hunter511 Posted August 17, 2019 Share Posted August 17, 2019 @Boristhedriver from experience the best thing you can do is nudge your own team mates towards "calling that" especially on day 2 Link to comment Share on other sites More sharing options...
Dread68 Posted August 18, 2019 Share Posted August 18, 2019 Been following the thread for a while . Heres my pew pew . Just waiting on a modify tan to arrive . Then im gonna give that a go . At the mo internals wise 285 crazy jet barrel ( may swap if anyone has a better recommendation ) Autobot bucking ( as wolf mentioned gets chewed up very easily and the range drops massively ) Daves SixG nun Heavy kick kit Uac lightweight bolt carrier Upgraded nozzle and spring set Troy trx 10" rail Magpul stock MGrips im not sure of GothicGhost 1 Link to comment Share on other sites More sharing options...
Jacket Posted August 18, 2019 Share Posted August 18, 2019 Like it. Is that rail buy Madbull? Thinking of getting the same, did it go on ok? Link to comment Share on other sites More sharing options...
Dread68 Posted August 18, 2019 Share Posted August 18, 2019 1 minute ago, Jacket said: Like it. Is that rail buy Madbull? Thinking of getting the same, did it go on ok? It is the madbull one . It gos on a hell of alot simpler than other rails . You get 2 adapters you just screw it on then nup it up with the rail as it has splines on it then 2 locking tabs keep it centred Jacket 1 Link to comment Share on other sites More sharing options...
Wo1f Posted August 18, 2019 Author Share Posted August 18, 2019 @Dread68 you might be good with the maple leaf autobot with the crazy jet barrel. I found it caught the front of the orga, but the barrel is made for that bucking. Link to comment Share on other sites More sharing options...
Dread68 Posted August 19, 2019 Share Posted August 19, 2019 Its been good so far but have noticed the last game the distance was dropping . Have a new bucking to try called the flamingo . So will try that before swapping out for the modify Link to comment Share on other sites More sharing options...
bapexxx Posted August 19, 2019 Share Posted August 19, 2019 16 hours ago, Dread68 said: Been following the thread for a while . Heres my pew pew . Just waiting on a modify tan to arrive . Then im gonna give that a go . At the mo internals wise 285 crazy jet barrel ( may swap if anyone has a better recommendation ) Autobot bucking ( as wolf mentioned gets chewed up very easily and the range drops massively ) Daves SixG nun Heavy kick kit Uac lightweight bolt carrier Upgraded nozzle and spring set Troy trx 10" rail Magpul stock MGrips im not sure of I can see that you use Iron airsoft Pmag... how do you make them to work with the gun? the pmag doesnt even go into the magwell properly and wont lock in place :/ Link to comment Share on other sites More sharing options...
Dread68 Posted August 19, 2019 Share Posted August 19, 2019 17 minutes ago, bapexxx said: I can see that you use Iron airsoft Pmag... how do you make them to work with the gun? the pmag doesnt even go into the magwell properly and wont lock in place 😕 Never had a problem with them they slip straight in and lock into place . I had read some had a issue with the mag catch not locking in . But the fix was to make the small hole larger on the pmag Link to comment Share on other sites More sharing options...
bapexxx Posted August 19, 2019 Share Posted August 19, 2019 3 minutes ago, Dread68 said: Never had a problem with them they slip straight in and lock into place . I had read some had a issue with the mag catch not locking in . But the fix was to make the small hole larger on the pmag thanks! which small hole is it? i might try that tonight. Link to comment Share on other sites More sharing options...
LoneWolf Posted August 19, 2019 Share Posted August 19, 2019 Hello mates, does anyone run the laylax chamber? If yes what Bucking & nub? Thanks Link to comment Share on other sites More sharing options...
Dread68 Posted August 19, 2019 Share Posted August 19, 2019 8 hours ago, bapexxx said: thanks! which small hole is it? i might try that tonight. Theres a youtube vid on it 8 hours ago, bapexxx said: thanks! which small hole is it? i might try that tonight. bapexxx 1 Link to comment Share on other sites More sharing options...
peeved87 Posted August 19, 2019 Share Posted August 19, 2019 Laylax quick charge, electric BB loader So I bit the bullet and thought I'd try my luck. Laylax are a good brand and you would hope they get this right.... however, review time Now my mags are new and very stiff. Even the plunger method is hard The laylax was okay to set up. For some reason adding the mws attachment took two attempts in order to get the motor to work correctly with depression Once working, it was time to try to test on a mag. It will fill only at a very precise angle. Probably 45° Does it fill completely? 1 in 5 attempts for different reasons. More concerning is the markings left on the BB. But I think I have it finally learnt it and will carry on. It needs field testing to see what affects it has on the BB flight and fill amount Overall..2/5, but my pistol speed loader does nothing! Link to comment Share on other sites More sharing options...
Guest Yukarin Posted August 19, 2019 Share Posted August 19, 2019 40 minutes ago, peeved87 said: Laylax quick charge, electric BB loader So I bit the bullet and thought I'd try my luck. Laylax are a good brand and you would hope they get this right.... however, review time Now my mags are new and very stiff. Even the plunger method is hard The laylax was okay to set up. For some reason adding the mws attachment took two attempts in order to get the motor to work correctly with depression Once working, it was time to try to test on a mag. It will fill only at a very precise angle. Probably 45° Does it fill completely? 1 in 5 attempts for different reasons. More concerning is the markings left on the BB. But I think I have it finally learnt it and will carry on. It needs field testing to see what affects it has on the BB flight and fill amount Overall..2/5, but my pistol speed loader does nothing! I've just ordered the Marui XL 470 speedloader, fingers crossed it works like a few people on the internet have been saying. Link to comment Share on other sites More sharing options...
DopeYourScope Posted August 19, 2019 Share Posted August 19, 2019 41 minutes ago, peeved87 said: Laylax quick charge, electric BB loader Interesting review cheers for the info, does it have a button or is it automatic? (stops loading when it thinks it's full) Link to comment Share on other sites More sharing options...
peeved87 Posted August 19, 2019 Share Posted August 19, 2019 Just now, DopeYourScope said: Interesting review cheers for the info, does it have a button or is it automatic? (stops loading when it thinks it's full) Press down and load. It will stop when there's too much resistance. Might be better for pistol mags. Perhaps I should have saved some money and got the xl Link to comment Share on other sites More sharing options...
Softairer Posted August 20, 2019 Share Posted August 20, 2019 Don't know why so many people have problems with speedloaders, I use the m4 mag sized tm speedloader for my mws and have never had an issue 🤷♂️. My mags are well used however. On a side note bought 2 hurricane warmag loaders for a friend and I and what a pile of crap they were. The handle on my friends one snapped after 2 games and my one had to be modified with an oring to stop the bbs falling out of the loading hole. The action of loading is rough at best and will not load a full mag. I have an Odin speedloader for my ngrs and considering the price was the same as the warmag the difference in quality/function/reliability is like night and day. Link to comment Share on other sites More sharing options...
peeved87 Posted August 20, 2019 Share Posted August 20, 2019 1 hour ago, Softairer said: Don't know why so many people have problems with speedloaders, I use the m4 mag sized tm speedloader for my mws and have never had an issue 🤷♂️. My mags are well used however. On a side note bought 2 hurricane warmag loaders for a friend and I and what a pile of crap they were. The handle on my friends one snapped after 2 games and my one had to be modified with an oring to stop the bbs falling out of the loading hole. The action of loading is rough at best and will not load a full mag. You answer your own question. Your mags are well used and there's a lot of shit on the market that don't do the job (warmag). That's why it's troublesome. Link to comment Share on other sites More sharing options...
itsme Posted August 20, 2019 Share Posted August 20, 2019 1 hour ago, peeved87 said: You answer your own question. Your mags are well used and there's a lot of shit on the market that don't do the job (warmag). That's why it's troublesome. i use a regular 10 euro speedloader (m4 style) with the gbbr cap and it works pretty well. sometimes i feel like im gonna break some bbs as you have to press it hard sometimes but when the spring breaks in im sure this is fixed. you could load your mags for a few hours to losen the spring if you want it to be well used faster 😛 Link to comment Share on other sites More sharing options...
FreeFrag.UK Posted August 20, 2019 Share Posted August 20, 2019 I must admit, I tried a GHK one thinking that it would a safe bet... Marui 1 : 0 GHK 😂 Link to comment Share on other sites More sharing options...
M.a.r.v.i.n Posted August 20, 2019 Share Posted August 20, 2019 Does anybody have experience with building second set of upper receiver+barrel+handguard? I am pretty confused as to what parts I will need. I ordered upper and forward assit (without the screw that is out of stock) so far. I saw some videos so I have vague idea of how the other parts look like but I have no idea what are they called or what number they have. Is there somewhere a plan of the gun with parts numbers? 24 minutes ago, itsme said: i use a regular 10 euro speedloader (m4 style) with the gbbr cap and it works pretty well. sometimes i feel like im gonna break some bbs as you have to press it hard sometimes but when the spring breaks in im sure this is fixed. you could load your mags for a few hours to losen the spring if you want it to be well used faster 😛 I load it manually. It adds some more realism 😄 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now