Wo1f Posted March 27, 2018 Author Share Posted March 27, 2018 I have mag envy itsme and sonofsammo 2 Link to comment Share on other sites More sharing options...
Wo1f Posted March 27, 2018 Author Share Posted March 27, 2018 Just ordered a guns modify CNC hop adjuster that’s going to go in the DMR. Hopefully it’s going to add a touch more consistency and adjustment. Link to comment Share on other sites More sharing options...
Dentonboy Posted March 28, 2018 Share Posted March 28, 2018 Few more pics: sonofsammo and Wo1f 2 Link to comment Share on other sites More sharing options...
Wo1f Posted March 28, 2018 Author Share Posted March 28, 2018 Looks great! I do think they look great with an Acog. Need to get a sling mount for the front of mine. Rainbow8 kindly emailed me and told me what I ordered isn’t in stock so I’m not best pleased about that.. time to source it from somewhere else.. Link to comment Share on other sites More sharing options...
Dentonboy Posted April 12, 2018 Share Posted April 12, 2018 Wo1f and sonofsammo 1 1 Link to comment Share on other sites More sharing options...
sonofsammo Posted April 13, 2018 Share Posted April 13, 2018 Hi all - Can anyone point me in the right direction for info on how to remove the front iron sight please? It's driving me mental. Also - any suggestions for a grip/stock/foregrip set? I'm thinking OD or maybe coyote..... Link to comment Share on other sites More sharing options...
Davegolf Posted April 13, 2018 Share Posted April 13, 2018 There is one small grub screw on the underside of the front sight unit, and there are 2 punch pins, you need to knock them out from the fire selector side / left side through to the mag release / right side. Take note of the pins orientation so you put them back the same way around and in the same hole. Wo1f and sonofsammo 2 Link to comment Share on other sites More sharing options...
sonofsammo Posted April 14, 2018 Share Posted April 14, 2018 23 hours ago, Davegolf said: There is one small grub screw on the underside of the front sight unit, and there are 2 punch pins, you need to knock them out from the fire selector side / left side through to the mag release / right side. Take note of the pins orientation so you put them back the same way around and in the same hole. Cheers dude! Next question - Can any of you suggest decent replacement stocks? (and grips - I'm thinking FDE / coyote possibly)... Link to comment Share on other sites More sharing options...
sonofsammo Posted April 14, 2018 Share Posted April 14, 2018 On 13/04/2018 at 9:14 AM, Davegolf said: There is one small grub screw on the underside of the front sight unit, and there are 2 punch pins, you need to knock them out from the fire selector side / left side through to the mag release / right side. Take note of the pins orientation so you put them back the same way around and in the same hole. It's all gone horribly wrong. Grub screw. Check. Pins. Check. Front piece of the handguard and inner metal rod moving - shiiiiiiiiiiiiiiiit What do I do now? It seems I know enough to wreck a gun, but not fix it. I was only taking it off to cheer myself up cos I can't shoot the damned thing. Please help before I implode. Or break something else.... Link to comment Share on other sites More sharing options...
Davegolf Posted April 14, 2018 Share Posted April 14, 2018 Ha punch that little pin out too just to the left of your red circle of doom I leave that pin out on mine as its really not necersary and just slows disassembly! Link to comment Share on other sites More sharing options...
sonofsammo Posted April 14, 2018 Share Posted April 14, 2018 7 minutes ago, Davegolf said: Ha punch that little pin out too just to the left of your red circle of doom I leave that pin out on mine as its really not necersary and just slows disassembly! Unfortunately, there seems to be nothing to hold the metal rod in place. Or the black end plate? Errrr - and I can't get either back in place anyway Link to comment Share on other sites More sharing options...
Davegolf Posted April 14, 2018 Share Posted April 14, 2018 The metal rod (dummy gas tube) is pinned to the front sight and slot thru the delta ring and into the upper receiver. Watch some YouTube vids, its disassembly / reassembly is well covered sonofsammo 1 Link to comment Share on other sites More sharing options...
Wo1f Posted April 17, 2018 Author Share Posted April 17, 2018 Manage to sort it, Sammo? new rail.. not impressed that the trades aren’t there like the picture, but it will do. Davegolf and sonofsammo 2 Link to comment Share on other sites More sharing options...
sonofsammo Posted April 18, 2018 Share Posted April 18, 2018 On 4/18/2018 at 12:41 AM, Wo1f said: Manage to sort it, Sammo? new rail.. not impressed that the trades aren’t there like the picture, but it will do. Sadly not as yet, haven't had chance to look at it again.. Link to comment Share on other sites More sharing options...
sonofsammo Posted May 9, 2018 Share Posted May 9, 2018 On 4/14/2018 at 9:36 PM, Davegolf said: The metal rod (dummy gas tube) is pinned to the front sight and slot thru the delta ring and into the upper receiver. Watch some YouTube vids, its disassembly / reassembly is well covered I cannot for the life of me find one 😞 If the gas tube is pinned to the front sight though, then I'm guessing that means I can't remove the front sight, as there'd be nothing to hold the gas tube and delta ring in place any more? Link to comment Share on other sites More sharing options...
Davegolf Posted May 9, 2018 Share Posted May 9, 2018 I don't understand what you are trying to achieve? Do you have a free float rail system to fit instead or are you just taking it apart to get to the hop unit? On the front hand guard remove the button head Allen screw near rail section T14, then the upper rail comes off. Then pull the delta ring back and the lower rail comes off. Then you can remove the front sight post with the gas tube still attached. The delta ring doesn't need the gas tube. Link to comment Share on other sites More sharing options...
sonofsammo Posted May 9, 2018 Share Posted May 9, 2018 47 minutes ago, Davegolf said: I don't understand what you are trying to achieve? Do you have a free float rail system to fit instead or are you just taking it apart to get to the hop unit? On the front hand guard remove the button head Allen screw near rail section T14, then the upper rail comes off. Then pull the delta ring back and the lower rail comes off. Then you can remove the front sight post with the gas tube still attached. The delta ring doesn't need the gas tube. This is where my noobishness is coming through. I just want to take the front post sight off, as it's annoying me with the scope I'm using. And then have everything else back as it was. Link to comment Share on other sites More sharing options...
Davegolf Posted May 9, 2018 Share Posted May 9, 2018 You need The from sight to hold the forward rail ring. To achieve what you want you need a folding front sight post like Vltor's one or a free float rail system. Link to comment Share on other sites More sharing options...
Wo1f Posted May 9, 2018 Author Share Posted May 9, 2018 You can’t keep the 2 piece handguard without some form of gas block. You can get a standard block one with a rail on the top, or as Dave said, a VLTOR one (I’m looking for a trademarked one of those!). Or... get a free float rail. You can get nuprol bocca rails (mk18 style) for as little as £35, although you will need a rail adapter ring (£10) Link to comment Share on other sites More sharing options...
sonofsammo Posted May 10, 2018 Share Posted May 10, 2018 21 hours ago, Davegolf said: You need The from sight to hold the forward rail ring. To achieve what you want you need a folding front sight post like Vltor's one or a free float rail system. 20 hours ago, Wo1f said: You can’t keep the 2 piece handguard without some form of gas block. You can get a standard block one with a rail on the top, or as Dave said, a VLTOR one (I’m looking for a trademarked one of those!). Or... get a free float rail. You can get nuprol bocca rails (mk18 style) for as little as £35, although you will need a rail adapter ring (£10) Thanks for the advice chaps. All fixed and back in working order, looking pretty as ever. I can't wait til I'm strong enough to use it in anger again 😄 Edit:@Wo1f - I just found this if it's of any interest:https://www.ebay.co.uk/i/302500214811?chn=ps&adgroupid=59254217168&rlsatarget=pla-623069070912&abcId=1134056&adtype=pla&merchantid=119192612&poi=&googleloc=1006991&device=c&campaignid=1340838148&crdt=0 Link to comment Share on other sites More sharing options...
clumpyedge Posted May 10, 2018 Share Posted May 10, 2018 Whats gas consumption like? never really been into gas guns. Had things like the MP7 and went through masses and masses of gas even on small CQB games. Link to comment Share on other sites More sharing options...
Davegolf Posted May 10, 2018 Share Posted May 10, 2018 The MWS mags hold 100rds+ worth of gas once modded. Having had an MP7 they are good on gas but have very small gas reservoir. I don't think there is a more efficient GBBR than the likes of the MWS & MP7 PS I'm selling an MWS haha shameless! The MWS IMO is a semi auto tool so not blasting through rounds like you would an MP7 Indoor most likely clumpyedge and sonofsammo 2 Link to comment Share on other sites More sharing options...
Wo1f Posted May 10, 2018 Author Share Posted May 10, 2018 Max I’ve had, on propane firing slowly indoors is 190 shots. It will happily mag dump twice, which no other gbbr I have used has managed, including 3 GHK’s. For me, it’s not only the best GBBR but the best airsoft gun currently made.. I do love my mp7 though. I run 5 mags and a speedloader. I’m going half of the day before I’m thinking about gas. If I was playing a milsim or somewhere there was a huge walk to the safe zone, I’d consider those little nuprol cans. clumpyedge 1 Link to comment Share on other sites More sharing options...
clumpyedge Posted May 10, 2018 Share Posted May 10, 2018 Thanks for the replies, currently considering options between going back to recoils or an MWS Link to comment Share on other sites More sharing options...
Wo1f Posted May 10, 2018 Author Share Posted May 10, 2018 24 minutes ago, clumpyedge said: Thanks for the replies, currently considering options between going back to recoils or an MWS If you’re gonna upgrade it and you like the mid caps, go with the recoil. If you don’t mind 35 round mags and want ultimate performance then I’d go with the mws Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now