Jump to content

ronin677

Members
 View Profile  See their activity

  • Posts

    509

  • Joined

  • Last visited

  • Days Won

    6

  • Feedback

    0%

 Content Type 

Posts posted by ronin677

    Problems with feeding in my CYMA 701 (VSR Clone)

    in Single Action Guns

    Posted

    Hi all,


    So I have just put an AirsoftPro twin lever hop unit in my CYMA 701b rifle. At the same time I upgraded the barrel to a X Fire 6.08 precision barrel. Put it all together and tuned the hop up unit, till it was firing like a dream. The tuning was done by manually feeding the bb's into the hop up one at a time for convenience (the twin arm hop unit has to be adjusted without the magazine on by allen key). So happy days so far.


    I then found that when I put the magazine in, the magazine empties completely in one go as soon as the bolt is pulled back. All the bb's empty backwards into the body of the rifle. I think the problem is the notch in the hop unit as circled in my photo. Any ideas how to fix this problem?


    20160305_154943.jpg

    Advice on Tightbore Barrel for A&K SVD

    in Guns, Gear & Loadouts

    Posted

    Nice on. I'm happy with my FPS as it ranges from between 455 and 465. I'll check the R hop though for wear. On hind sight I will probably keep the R hop as it compliments the upgraded hop up unit rather well.

     

    I'll go for the wider bore barrel on the advice I've seen there and try a 6.08mm. I'll go steel.

     

    I'll let you guys know the results once its all put back together.

     

    thanks

    Advice on Tightbore Barrel for A&K SVD

    in Guns, Gear & Loadouts

    Posted

    So my range is ok, I'm getting approximately 80m +

     

    My problem is the consistency of the shots. My fps is around 460. The R Hop has always caused me concern and I've often wondered about revert back to a traditional bucking. What would you guys recommend?

     

    So the general consesus is a wider bore barrel yes? Approx 6.05? I've ugraded the sear on my rifle and so am happy running the M150 spring in it. The cylinder seems to be holding up well (almost 18 months now). When it goes I'll replace it.

     

    Is what I've paraphrased about right? and will the modifications help with my accuracy?

    What sniper to buy? SnippaaWiffaaa

    in Guns, Gear & Loadouts

    Posted

    You could buy an A&K SVD and stick a new spring in it, upgrade the sear, replace the hop up with one from Airsoft Pro, and finally replace the inner barrel with a tight bore. This would give you a springer firing at about 450-500 fps and a range of approx 80m.

     

    either that or a TM VSR as these are easily upgraded

    Where to find CYMA spare parts???

    in Guns, Gear & Loadouts

    Posted

    2 bolts, 2 brass sleeves + 2 sprung lugs/bullets

    oooh dunno special order them mofo's

     

    £3 posted ??? - can just chuck 'em in a jiffy bag

     

    It came off the AKFrizzle 901c crappy double eagle krinkov bollox

    but them bits and the folding stock should be compatible

    (99% reckon it is probably made by Cyma or JG I would of thought)

     

    if ya want the rear folding stock butt bit - £5 total to cover bit more postage/parcel but those bits n pieces should fit on your cm stuff anyway

    £6 for everything in pic but the side-bars you probably won't need - you would have to removegearbox to remove & fit the bars

     

    it should work with just screws/sleeves/lugs etc.....

    you shouldn't need any of the 901c stock itself really

     

    worth a shot I'd say - but maybe look to get some loctite thread seal/glue to stop you losing them bits again if it all works ok

    Send me your Paypal addy and I'll send you the £6 :)

    Where to find CYMA spare parts???

    in Guns, Gear & Loadouts

    Posted

    Got cheapo crap like that

    That "might" do the job.....

     

    Folding AK stock bits n bobs that could fit

     

    Didn't chime in earlier coz thought you was after bespoke m14 hop or something

    But 74 stuff might be able to use /help

    You got the bits that might do the job? Would be mighty appreciative if you had :)

    Advice on SVD scope

    in Guns, Gear & Loadouts

    Posted

    Hi all,

     

    Ok I have had an airsoft SVD scope before and it was awful but....

     

    I need another as my real steel PO6x36 just will not zero on an airsoft rifle. I have been offered one of these 4x26 airsoft scopes second hand and wondered if I should go for it again. I know about the issue with the parallax on these scope but I can live with that. The thing that I hated about my previous was that it was like looking through a window covered in vaseline. The guy selling this one however says that his optics are as clear as day.

     

    Have any of you ever had a good experience with these airsoft scopes?

     

    http://www.patrolbase.co.uk/airsoft-sights-scopes/ak-svd-dragunov-4x32-scope.htm#.VafqeqRViko

×
×
  • Create New...