-
Posts
2,309 -
Joined
-
Last visited
-
Days Won
24 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Wo1f
-
I’d go with the 50-60. I’ve got them in many guns. I’ve got the TR hop in my mp7 and SRS and I’m very happy with it
-
I’d definitely give those a go
-
Yeah. That looks like a pistol/ WE m14 design. A maple leaf I key and a maple leaf / TNT TR hop rubber should work really well in that
-
Hmm.. might try and source a co2 valve that fits
-
I might be brave and try and inject co2 into one of mine
-
Looking at the thickness of the mws shell, i wonder if you can devil hunter mod it😈
-
My bad. Had a bit of a brain fart again. I’d advise against the crazy jet for a gun designed for an AEG. Purely because I don’t rate the buckings you have to use. The barrel is very good, but the bucking I’m not so keen on. The problem i had was the nub pushed the outside edges of the TNT TR hop bucking. To fix this I took some 800 grit sandpaper, put the nub on it and drag it dow the paper 6 inches. Check and repeat. It took me 3 strokes to get it completely flat. Did you get the bucking with the fast chamber? Might be worth going to the standard barrel, that bucking and the prowler first
-
I want first refusal of you ever come to sell it 😂
-
I have no doubt, I just can’t stand the prick What’s the specs of the rifle? Even when mine was in its semi broke state I could hit something at 75m almost every time
-
I wouldn’t put limping donkeys BBS anywhere near my gun on the basis of he’s a dick. I’m gonna do some testing tomorrow with Geoff’s .43 and then try something heavier. @sonofsammo I’ll show you what I did to the nub when I get in 👍
-
-
Get a pic up in the MWS thread when it’s done! I’ve got their mk12 barrel in my gun. Nice quality
-
I've got an Angrygun buffer tube on mine, but i believe the standard one is milspec too. grip is RS spec and will bolt straight on with no modification. at least to the few ive tried. The only external issue is most rails need an adapter ring. whats the verdict on the nub?
-
£350, sure.. not that much. I’ll wait for the inevitable JG, CYMA clone
-
I traded a full systema internalled, magnesium bodied PSG-1 for a vector and have never been so disappointed in my life. Had a PTS mega arms 308 and a USP tactical. £1000+ in kwa stuff and all of it was below average in terms of performance. Tm and VFC gbbr’s Run rings around them in my experience
-
Actually, what gives gas guns their impressive range is joule creep compared to their FPS when using heavy BB’s. Accuracy comes from a good hop rubber. KWA can’t utilise the gas advantage because their hop design couldn’t lift a dick in a strip club. This chamber fixes the issue of the lousy hop and lets the gun perform. I still wouldn’t touch a KWA product for as long as I live though. Too many bad experiences.. even with an airsoft engenuity touched one.
-
You can’t cover thermal with a lens as far as I’m aware with a poly lens. Apparently if you buy from Scotts they cover the lens for airsoft edit:... beat me to it
-
For what it’s worth, my brother’s jg g36c has swallowed a few bags of these without a single issue. Only mod is a maple leaf bucking if that were to make a difference.
-
G&G according to tests are top. Even better than Geoff’s for the weight range they offer.
-
Silverback SRS 16” gen 3
-
Some good info there. Thanks, @Fissure
-
Also wanting to know this. I’ve asked the question ages ago on their FB, but got no response.
-
Worlds longest, most expensive bit of brass tube... 5.98-680mm-£180 😭
-
Stay away from angry gun when you can. They’re more miss than hit in terms of fitment.