Jump to content

Davegolf

Members
  • Posts

    2,103
  • Joined

  • Last visited

  • Days Won

    16
  • Feedback

    93.8%

Everything posted by Davegolf

  1. You mean Zero One actually had stock of something!! 😂 Happy birthday BTW! 🍺
  2. Just joined the MK23 club with the aim of sorting that NBB trigger out!
  3. I feel like you may as well have a P90 over a CQR for the same look, plus compactness, only real world difference is calibre otherwise, but again may as well have the AP of the P90 round over such a short 5.56 barrel??
  4. Stock folded yes ok! Im 6'4" lol
  5. Can your arms even reach that front RVG?
  6. Mmmm decisions decisions, I prefer the Dark Matter to the SRU
  7. I loved mine, kept a spare nozzle but never had any issues running green in the summer. Modded the hop and fitted a Super Nub which made it as accurate as an MWS. Also this vid is a must watch for any TM MP7 GBB owner, works are well worth doing.
  8. All of these fancy looking builds are just that. Performance wise they suck. Advice to anyone spend on what's under the hood not what it looks like, externals are easy to change, re engineering gearbox and hop systems is time consuming and expensive to be fruitful.
  9. To be honest i would change the engine and wheels if i bought a BMW. Unless it was an E30 M3 but youd never get one of those in a showroom these days
  10. Its easier to change looks than internal quality - that is the moral of the story, an MLOK rail for an M4 is easy to find I dont like recoil, i take it of my guns, easy to do. But mag empty detection is nice to have.
  11. You want range - TM Recoil You want smooth running - TM Recoil You want higher ROF reliably - TM Recoil + BTC/Titan + gearset + EagleM90 + 9.9V Get a new if your budget allows or used Recoil, + those 4 mods will achieve more than youve probably ever expierenced and last a very very long time. Get a solid base gun and get the internals done then leave it alone inside; I know this looks quite different, but better to start with something like this https://airsoft-forums.uk/classifieds/item/10003-tokyo-marui-m4-cqbr-recoil/ and change the externals as you please over time. Best Dave EDIT: Wanted to say - spend once wisely, get the base gun and save for upgrade later if needed. The stock TM is simply amazing anyway.
  12. When tightening the barrel nut you need to make sure that the hop lever stays centralised in the the reciever groove. Yours is probably rubbing on one side
  13. https://eagle6.co.uk/shop/catalog/product/view/id/3032/s/laylax-pss10-6-03mm-inner-barrel-g-spec-length-303mm-for-vsr-10-bolt-action-rifle-series/ OR if you want the best try and hunt down a PDI 6.05 in 303mm
  14. Nooooo just put a 303mm Prommy in there and you're golden 👍
  15. I can hear the Scar stocks breathing a sigh of relief
  16. Nice, which Cerakote'ers are you using?
  17. Glad you went Prommy, for I while there I thought you were going to go Crazy. Some like them but in testing I did not. Before you get super excited and throw all your packaging away; roll the barrel on a flat surface and check it's true/straight. Also inspect the crown/barrel exit for any little burrs. 95% of the time Prommy are bang on but sometimes there's the odd lemon
  18. Haha! Yeh "wait a minute where you are" walks over with a surveyors trundle wheel 😂
  19. Upto about 50M you probably wouldn't notice much difference, but for the purposes of DMR and Sniper with longer engagements sensitivity of BB / barrel contact increase a lot! Proof in sniper testing with a BASR @ 500fps, swapping to longer than even 303mm hurt accuracy in a big way at 75M and beyond. We were getting accurate measured shots to torso size target at 100M with a 303mm! In the same vein, tighter bores increase this sensitivity again. The above bolty was running a 6.05. 6.03 is the smallest I'd go on any RIF other than a pistol. Best Dave
  20. @Shizbazki don't worry about inner and outer barrel lengths being close to each other. Try to get upto FPS with a 370mm rather than any longer, it only hurts accuracy. Dont go tighter than 6.03mm bore. @Wo1f had great results at 80M range with his DMR setup.
  21. Did you start reading at the beginning of isolation!? 😂 Have used Defcon before all good from my experience as 0.0001% of there sales prob haha. Camoraids, Firesupport also good UK MWSers Glad your not coming out skirmishing, prob a shit hot shot lol! 😉
  22. What is it, break barrel thing? Pump it up?? What you spent the other £20 on?
  23. This advert is COMPLETED!

    • For sale
    • As new

    Bought this new from FireSupport less than a month ago, I also bought a new LCT railed dust cover and RS Magpul stock & cheek riser, both of which have been fitted. It hasn't left the room it's photographed in, just decided to go a different build route. TX-5 £239.00 Rail £60.00 Stock £70 O.75" Riser £13.00 Plus delivery costs. Sell complete £300 posted. Will sell separately too, TX-5 only £200 posted.

    £200

×
×
  • Create New...