JinxDuh

Update: S&T with Titan v3 is FUBAR. Even cutting out most of the gearbox where it sits still wasn’t enough. I’m going to move the mosfet over to a JG as a test fit went smoothly. One other benefit is JG parts are easier to get ahold of.

So I bought a titan v3 to fit into my S&T MG36 as I run it pretty hard and want some preventive measures. Upon opening up the gearbox, there’s a lot of material that I would need to remove to fit the Titan. Has anybody managed to fit the titan into an S&T? Is the material removal fine to do? I’ve already removed a small chunk to test so no going back really anyway 😬

Or the PTS EPM-G (disregarding price 😂) https://www.patrolbase.co.uk/pts-syndicate-epm-g-enhanced-polymer-aeg-mid-cap-magazine which fit into m4 pouches, go directly into the g36 and feeds beautiful. They fit and feed, from my experience in: S&T JG Cyma Ares/VFC/Umarex GSG

Picked up a M16A4 from a friend today for a good price, ordered an E&C M16A2 receiver with burst engraved, genuine M16 triangle for an M203, as well as an M203 and old school heat shield. Also bought a Gate Aster to have the burst mode. All of this because I watched Generation Kill again.

https://shop.super5ives.com/shop/item/14876/raven-eu-series-magazine.html https://justairsoft.co.uk/products/raven-eu-series-17-18-33-25rnd-gas-magazine https://www.highpressureairsoft.co.uk/raven-eu-series-magazine https://eagle6.co.uk/product/raven-eu-series-magazine

Update just in case somebody has the same issue as me: The switch to go to IR Laser mode wasn’t fully engaging with just gentle turning, so giving it a little extra force (Not too much it breaks though!) got it into the slot and alas, IR laser.

I have a (what I believe is a pre 2016) Element LLM01 which says it has an IR Laser. The problem I’ve ran into is that pressing the left/right only activates the IR flashlight, and the main button is visible flashlight. Not sure if I’m doing something wrong, hopefully somebody that knows the unit more might have an answer? 😂 Also before anybody mentions it, no I’m not running the laser at games. Just bedroom larping 😂

You should probably list everything that's been done, with brands for each part as well.

Yeah, I’m aware of the maxx. Had bad experiences with their m4 versions in the past so I’m trying to find one in the UK that I can send it back if I run into another bad one.

Hey guys. I bought an Umarex G36C from here, but wasn’t keen on the burst mode and ares EFCS so I’ve switched out the lower with an S&T gearbox. Changing the gearbox also meant changing the hop unit (There’s a slight variation between the ares & S&T) which is all well and good but I don’t think it’ll last too long. Now to move onto the problem I’m having: I can’t find an aftermarket hop unit that’s metal, and works with an S&T. Anybody know of any that are an improvement? 😬 I’m aware of the maxx GST but I can’t find one anywhere sadly

Props to you man! By no means the worst thing in Mack’s 😂

£30 brand new, in that condition I’d pay a tenner, £15 max personally. Did make me double check when I read it saying excellent condition with the screws looking like they came out of WWI

Yeah I have some of his HK stickers, last time I asked he wasn’t able to produce them sadly.

I just recently bought Krylon “camo” as Halfords was out of stock. Personally I prefer Halfords, goes on better and dries better. I also prefer the colours of the Halfords paint. The far away dusting is a good idea though, I may have to try that!

To HPA a GBBR, you’d need a “tap” that goes into the magazines and replaces the gas port. It’s essentially a replacement for green gas. The grip ones are usually AEG, which involves an “engine”. By no means an expert though!

Yeah I had a feeling they were, thankfully airsoft ones are just printed on (it seems). The printing idea is a great shout, I might have to give it a try

Sorry if it’s not the right place to ask, not really sure where else to put it… I’m looking to replace the “export” markings on my G36 build to the “SEF” version. I’m rather stumped on where to look to acquire the correct font/size decals, or what to even look for. Anybody done this, or know where to find any decals? I measured the markings on my AG36 UGL and they’re 3mm. I found some similar but they’re 6mm and no good.

I can grab some for you tomorrow if I remember haha. I took everything out of the upper receiver until all that was left was literally the barrel (And upper), and looking down from behind the barrel (Where the hop up would be etc) there is a thread where the actual barrel is. Tried turning it CW/CCW with no movement at all so I figured I'd give up. I asked the guy who made a youtube video on building the C to a K (https://www.youtube.com/watch?v=GKO0DfAnYEc&t=212s) and he also used barrel extensions, which I'm assuming is due to him running into the same issue as mine.

No longer need - turns out the barrel unscrews, so I can’t replace it with the ares one!

Bought a G36 EFCS from on here but want to change the outer barrel length to the Kurz variant. Only thing I’m struggling with is finding a diagram showing how the barrel attaches to the gun. Anybody taken the barrel out, know how it affixes or anything that would help? 😂

I'm not sure bud, I left about 2pm to get back home. Sorry!