JinxDuh

Never seen a game, only shot in my Nans friends aunt's cousins uncles brothers back garden. Shoots like a laser will easily outrange teh bestest snipers! It's fully upgraded with every part £700 buyer pays fees, postage and for the box it comes in!

I'll keep an eye out for you!

No bud, not out playing until the 9th (Next weekend) at Splatoon 🤙 Appreciate the offer though!

That's what I was thinking haha! I'll get a replacement ordered and hopefully it'll fix my issues. Thanks!

Actionhobbies has them listed for £450, landwarriorairsoft has them listed at £400 so following the general rule of thumb of 70%, you're looking at £280 - £315

Would it be at all possible for a measurement on the nozzle fitted? I have a sneaking suspicion the guy I bought it from has messed with it prior, as the one I replaced had 0 air seal and was about 1/2 the size of the one I fitted to test. No worries if not of course, as they're not the easiest things to get too!

Aye, battery goes into the suppressor. I have a battery cradle I 3d printed to hold the battery off of the barrel (That also acts as a second barrel stabilizer). Starting to think I'm paranoid about barrel stabilization...

There’s about 1/5 open area with the nozzle fully fowards, so I think that’s the next thing to remedy. Seems to be the likely culprit!

Yeah, gearbox cycles and it does push BB’s in because if I pull the trigger 3 times then push the hop up to “off” and it’ll fire all 3 (Plus the fourth) out. I’m not sure if it’s common for BB’s to not fire with full hop tbh, I’ve never really messed about with the AK hop ups. My V2 hops do fire on full hop though. How would I check for air leaks? I’ve compression tested the piston parts and all seems good. I did notice the nozzle sitting a bit awkwardly though; There’s a slight gap between the nozzle and rubber. Again, not sure if that’s normal.

My initial thought was the stock motor unable to handle the m130 and produce enough air/power, but I don’t have a spare motor to test my theory 😅

Hey people, I bought a VSS ages ago pre owned that had some issues with the hop unit (As informed by the seller) I didn’t touch it for a while then decided to build it as a DMR. I fitted a gate titan I had spare to semi lock it, gearbox works fine, compression all seems fine. I changed the inner barrel to a maple leaf 410mm (Using a 3d printed spacer to keep it central), a 70 degree ML bucking and one of the XT Omega nub copies & an XT M130 spring. The issue I’ve ran into is, if the hop is fully off it’ll fire at roughly 320 on .25g bb’s, roughly 280 with the hop in the middle, and with the hop fully on it won’t fire at all. I’ve tried the original nub and bucking, but it does the same thing. I also put the original barrel back in with both the upgraded parts and the standard - Same result and same chrono reading. At this point, I’m beyond lost on potential issues and where to look. This is my first DMR build too, so I may have missed a vital step and have no idea 🤷‍♂️😂

As much USGI Vietnam stuff as can be carried then sell it all to me for cost 😏

Just your average AK experience tbh 😂

Start a dispute anyway, and keep it open until it's resolved fully. It'll more likely get them to sort themselves out - It's what I had to do when I had issues with them!

There’s plenty of molle mounted cases that are solid with no holes for cameras etc. Most noticeably the juggernaut clones.

Not with all those creases and tears around the pistol 😂

https://www.airsoft-hub.com/item/31574-vorsk-cx-9 £200 pre owned, or £105 from patrolbase brand new 🤔

God, that is hideous! It's a blast shield, 99% sure it's a "Ferfrans" modular muzzle brake device. https://www.tacticallink.com/ferfrans-cqb-modular-muzzle-brake-system-and-concussion-reduction-device-for-ar10-7.62-308.html

Hey bud, so JG's are still one of the best G36's - Take that as you will... As for hop up, I've recently had a lovely time trying to build a KA4 using JG parts so here is a list of hop up units that will work; AirsoftPro CNC G36 Hop-Up Unit ProWin G36 CNC Hop Up BEGADI G36 Metal Hop Up Lonex G36 Metal Hop Up (Personally, I love the Lonex one and up until recently it was my go to for hop ups) Begadi/Maxx G36 Hop Up (Pricey, but oh my god - SO GOOD!!!) The SHS one is... Okay. It's polymer, but it does work. I would avoid the Nuprol one, personally. I fitted one and it fell apart on testing! I've tried all of the above, and honestly I'd recommend either the Lonex for a tight budget, or the Begadi/Maxx if you're wanting to splash the cash on gucci.

Joined less than 24 hours ago ✅ No effort made ✅ On Mack’s before the accounts a day old ✅ We should have a new account bingo sheet 😂

Same issue, just I didn’t send mine back and still have it 😂

It’s the only thing stopping Mum killing me for scratching her glass counter. I’ll pass 🤣