JinxDuh

Can’t be any worse than the raptor 🤣 I like the hop up adjuster, that’s very slick!

The new version is on airsoft world with an unofficial fix for the gas at £160 so I’d be looking at £130 max for the bundle using 70% Paid more than that so think it’ll probably go back into its pouch and get taken out when it’s warmer 🤣

Posted in the wrong section… Again 🤣

It is to be honest. It’s a lovely gun to shoot, but sadly it does have the tendency to vent if it gets slightly cold. It’s one of those pews that I’m not too rushed to sell but alternatively I don’t want to put more money into it to fix the gas issues when running it in the winter with my ratnik stuff 😂

I have a first generation MP-443 Grach that’s had a Gen 2 nozzle fitted so it actually works. Raptor Grach’s are notoriously bad for gas leaks etc however both of the mags are gas tight and the pistol works fine as should. I’m looking to shift it as they’re relatively collectible but I have no need for it, just unsure of price.

Disregard

But you’ve all missed the main selling feature, it’s semi… and full auto!

Militaria events - I saw a LOT of UCP for dirt cheap recently at a reenactment.

No just mentally deficient 😂 99% of the time I would sling the rifle on my right shoulder barrel forwards to and from game zone to safe zone. I do also wonder why majority of pictures are with it on the left side though

I did it on mine to stop the handle from poking my side 😂

This one?

The F90/EF88 is great but an AEG would be lovely! I’m just surprised they made a bunch of variants but didn’t think to make the correct upper rail

Why has nobody made (to my knowledge) an actual AUG A3 AEG yet? I know copy and paste is prevalent in the airsoft industry but surely it wouldn’t be that difficult to make the correct upper?

Update: Cut the bar, bent it to a good position, did the trigger Allen bolt all the way up (So it sits as low as possible) and it worked first time. Absolutely buzzing 😂

Original switch at the top, new switch at the bottom. I’m assuming I just bend the metal to the same rough shape, but is there any sort of guidelines? Upon inspection/fitting, the arm touches the cog so I’ve cut it down to where it should be okay

Initially I assumed he was a reenactor. To be honest the surest way to not have issues is to just leave it at home. It’s not exactly necessary, the kit can still be worn without a pistol. That would be my personal choice and decision if I was in ops shoes.

Airsoft Competitions was on here a while before his stuff started appearing, plus the usedairsoft guy is in Essex (Apparently), and Airsoft Competitions is in Bishop’s Stortford (Just outside of Essex) and different items. I purchased some tickets for AC, didn't win. Definitely a scam!

As above though, deacs or non firing is obviously a lot easier. You could disable the pistol from being able to fire at all, to comply more but that would be down to you.

Should just pull down the black pin by the adjusting lever and slide it off?

The bocca's go straight on 99% of the time, the modification would be removing the delta ring and installing the new one. Ideally your outer barrel should work with the rail, so a 12" using a 12.5 etc, personally.

Needs a 20 magnification scope on it!

This is the last cause, and does seem to be the issue. However, for some reason it's gone really floppy so I'm looking now to buy a new one to replace

Given up trying to figure out this m249, anyone have recommendations for a tech that I can send it too Need the hop up messed with so it works, and the gearbox fires by itself. It’s got an airsoft pro hop to go in, with a gate nanohard