WarriorTed

It takes standard nubs and buckings but the unit itself is not a standard m4 hop and there is no aftermarket upgraded chambers. The barrel is also aeg standard if you want to upgrade.
Also for the FPS there are 3 settings on the spring guide so you should be able to increase it slightly. Its really easy and only needs one pin at the back of the gearbox to be removed.

I use Nuprol 1.0 duster gas, it is the same power as the recommended abbey 144a gas but it has a longer nozzle that fits the FNX without an adapter. Lots of people use green gas with no issues in the FNX too and the majority of those nozzles reach the valve too (ASG ultra air and WE Green Gas too).

It takes standard nubs and buckings but the unit itself is not a standard m4 hop and there is no aftermarket upgraded chambers. The barrel is also aeg standard if you want to upgrade.
Also for the FPS there are 3 settings on the spring guide so you should be able to increase it slightly. Its really easy and only needs one pin at the back of the gearbox to be removed.

For this price anything is possible. I have a few higher end pews but I would recommend the ASG scorpion evo... or the NGRS (m4 beats out the aks and the scars imo).

It only causes damage if the mag is fully loaded with bbs to the point where the spring is fully conpressed. As long as there is a one or two BBs of compression left it is a ok to insert the mag with the slide forward.

A new PTS Masada GBBR (patrol base clearly did a clear out of the back of the store house). Could either be the a great purchase or a nightmare if something breaks as im sure they are no longer being made....

A new PTS Masada GBBR (patrol base clearly did a clear out of the back of the store house). Could either be the a great purchase or a nightmare if something breaks as im sure they are no longer being made....

A new PTS Masada GBBR (patrol base clearly did a clear out of the back of the store house). Could either be the a great purchase or a nightmare if something breaks as im sure they are no longer being made....

I am going to be a little contrary here but....
 
I have the ICS L85 and reading fourm posts got a G&G Susat from fire support (ignored the warning on their page that it does not fit the ICS) and when it arrived it did not fit. The G&G L85 rail is 1mm wider than standard so the susat was wobbly and could not be tightened further to fit. Even fully tightened it still moved about.
 
I believe that there may be variants to of the G&G Susat as many people say they fit but just beware!
 
The ICS is a millitary spec rail and will fit a real Susat. Also most of the £70 reproduction susats floating about are the same fitting. I got a random one of ebay and it was a ok.

No, we were at our usual outdoor site (don't want to name them as they are great and this seems to be a bit of an unusual situation).
 
I do think ammo needs to be checked as personally at multiple sites I have never actually seen a proper off the cuff chrono taking place.

It is an interesting one. My friends and I were at a site in Scotland the other weekend and all of us have reports of being hit harder than anything we have felt before. Its all somewhat unsubstantiated and conjecture but honestly I got hit in the chops (wearing a facemask luckily) and it was not like a normal hit I have experienced before.
To add to my comment tho, as long as the Joules output is within site limits I suspect that it just carries more momentum and so feels harder at longer ranges. It does raise an interesting debate regarding minimum engagement distances as they are currently set up for standard ammo.

It was an airsofter with a youtube channel who bought this crazy monstrosity.
 
Goes by PewPew_Paladin and does good videos on various rifs.
 
https://youtu.be/YdWcZ3H1mUc