Adenley

For sale is my Specna Arms original model SA-E07 Edge which was built negative Airsoft (Luke) in 2021 This build was made for fast trigger response, speed and longevity. And to only be used on a 7.4 battery, (do not use a 11.1v with this. It’s Currently doing 25rps with a 7.4 Li-ion.) The build (2 years old) * 12-1 gears with 3 teeth removed * Swapped piston cylinder and head * Perun ABB+ Mosfet set up for pre-cocking and full auto at the moment can be changed to burst or any other preference * high speed motor bits I’ve added ZCI 6.02 340mm barrel (possibly too long for the cylinder. ZCI rotary hop unit (new) ZCI rubber and nub (unsure on performance as only just fitted due to replacing unit) Magpul style stock Bad bits/known issues (cosmetic) * Unfortunately when I bought this I was subject to Specna arms poor quality control from opening the box, there was a casting issue with the receiver pin which has now settled down without to much issue. there is no screw for the pin, threads are also damaged, sits tightly with no movement * Dust cover latch snapped, would not close, this has been replaced with an aftermarket one which does close but is slightly oversized. * Forward assist just decided it didn’t want to be in the gun, about £5-6 to replace * Mock bolt catch not present. * No M-lock rails included * Be advised that this does generate a lot of motor heat due to pre-cocking, burst modes etc * Connections to motor are soldered due to movement of the motor causing the connectors to come loose, (carried out by Luke) so going into this gearbox required de-soldering or the connections This has been an amazing bit of kit to use but I stopped using it ages ago due to m4s just being boring and owning too many RIFs. This is more for a CQB build but I have used this plenty of times outdoors. I have not been inside this gearbox since it was worked on. Chrono results are on a .25 Accessories original box, 2 x 120rd magazines video attached below, sound warning skip to 3:04 if you don’t want to listen to Skylar happy to answer any questions or provide additional information- no swaps or trades UKARA or other defence required PayPal fees and postage included in price, sent via parcel force 48 no exceptions tracking and updates provided - £140 located in Malmesbury Wiltshire if collection preferred

This item is SOLD Unskirmished and brand new cosmetically Cyma MP5K which suffered mosfet failure before it even saw a game. I attempted to put a new v3 trigger switch assembly but due to some issues with the trigger they are not a simple straight forward swap unless you don't want semi auto, a cut off lever is not installed as standard with these either. a perun V3 can be fitted to these with modification to the selector plate but I don’t want to look at this thing anymore. Internally and cosmetically great but the mosfet fires a uniterupted burst on pulling the trigger. includes original box 2 x brand new old school high caps 1 x 130rd mid cap 1 x brand new battery extension 1 x new sling end cap stock plate any question or additional photographs feel free to contact me UKARA or other valid defence required PayPal fees and postage included in price, sent via parcel force 48 with tracking and updates provided. located in Malmesbury Wiltshire if collection preferred.

For sale is my M249 Lightweight Para, fitted with a version 2 quick change gearbox and made from mostly polymer. No magazine is included very easy to work on with only 4 screws and one pin to remove the gearbox completely This works with M4 magazines or Box Type Fitted with a gate X-ASR basic mosfet and specna arms basic motor which was better than the original, . Gearbox has been cleaned, shimmed and regressed. No wear on Piston, or gears. O-ring holds Airseal the battery can be fitted under where the barrel slots into place. Chronograph result of an average of 274fps (0.87J) on a 0.25g bb Rate of fire on 7.4v Li-ion 18.1 R/S Rate of fire on 11.1v Li-ion 30.3 R/S I would recommend a hop rubber change due to age Happy to answer any questions or provide additional photographs. UKARA or other valid defence required paypal fees and postage included in price, sent via parcel force 48 with tracking and updates provided No trades located in Malmesbury Wiltshire if collection is preferred.

This item is sold For sale is my AR-10/SR-25 style CYMA platinum edition DMR, with 4 x high cap magazines (500rd) and 5 x mid cap magazines (120rd) this is running standard AEG power no major modifications other than an ICS CXP DMR stock which is a lovely piece. ZCI 6.02 barrel ZCI rotary hop unit, plastic brand new installed before listing, fitted with zci rubber and nub included. Unsure on how these perform as haven’t fielded this since. as standard high toque motor micro switch mosfet 18/1 gears steel rack piston 16inch mlok handgaurd steel gears silent piston head and cylinder mock bolt catch 8mm bearings wired to mini Tamiya O-rings have been changed on piston head and cylinder head to sort air seal, gearbox cleaned. You will notice a cylinder rash from where the original o-ring which was crap scarped slightly. No issues with performance otherwise currently running an average of 296fps on .25, this does also have a full auto function bad bits or known issues * The gas block, which luckily is non functional and stays in place securely, the grub screws as you can see are non existent and a bit of a state. No issues from a Functional point of view but just ugly * Not fitted with original flash hider * Missing 1 x grub screw from rail, damage to thread as well, although the barrel is well attached to the receiver securely with no wobble or movement * Left hand side of body has noticeable marks from use, scratches and general wear. * Ex two tone with slight reminiscent of red paint in small parts of the rail, not easily seen. Accessories 4 x high cap mags 5 x mid cap mags original box (in the loft and need to dig out) happy to answer any further questions or provide additional information. No swaps or trades UKARA or other defence required Paypal fees and postage included in price , sent via parcel force 48hour no exceptions, tracking and updates provided - £200 located in Malmesbury Wiltshire if collection preferred.

Tokyo Marui Hi-capa 5.1 black with 3 x magazine and Nuprol quick release holster For sale is my Tokyo mauri 5.1 hi capa in black which has been a trusty sidearm for quite some time. great range and accuracy Sadly this is missing its front sight. The magazines (like all of them) can be temperamental and leaks from the base if not kept pressurised. Id advise keeping all magazines gassed . Its currently holding gas fine at the moment . Avoid pressing the release valve and dumping the gas General wear and tear and marks from Holstering. Flamingo hop rubber fitted but could do with a replacement at the next available opportunity This comes with 3 magazines, 2 of which are WE which fit and feed but have some stiffness on entry and removal of the magazine. Comes with original box, manual, 3 x magazines (1 x TM/2 x WE). A under rail torch mount, spare magazine followers. Basic Nuprol holster and an additional silver slide which has excessive wear UKARA or other defence require PayPal fees and postage included in price. Sent via parcel force 48. Tracking and updates will be provided - £100 Located in Malmesbury if collection preferred, happy to answer any question or provide additional photos/information

For sale is my GHK G5, great bit of kit for as this was my first GBB rifle I owned. Cosmetically a few scuff and scratches to the metal parts, mainly the bolt carrier. When I purchased this a mod was done to make the fps adjustable which is a small grub screw inside the nozzle as this was firing hot, this was not done by myself. There is 1 x screw and nut missing from the handguard (there is 3 on each side). some slight wear on the block chamber from the grub screw protruding. a great bit of kit with a hefty kick, selling as the magazines just weighed me down to much. These are not fun to reload unless you have a speed loader adaptor. I may have one lying about. also to note that the gen 1 magazines are prone to have feeding issues with the feed lips over time, I recommend some gen 2 magazines or modification of the feed lips. Experience with GBBRs desirable it currently has a new maple leaf hop rubber fitted. Accessories 1 x 38rd magazine (Gen 1) Carbine kit MOE style stock no rear sight included PayPal fees and postage included in price. Sent via parcel force 48. Tracking and updates will be provided - £220 UKARA or other defence required No swaps/trade Located in Malmesbury if collection preferred, happy to answer any question or provide additional photos/information

KWA MP9 GBB, 2 x 50rd magazines suppressor. For sale is my KWA MP9, a very enjoyable secondary which has served me well in its time. However there are some minor defects which since I’ve owned this have not effected its function but could in the near future. Pin for nozzle housing loose due to a small part chipping of in the but retains its place. Hop rubber worn and requires replacing. C clip and pin missing from stock. I used this with an 8 fields smg holster which would not allow the stock to be used and in the process I cannot locate it the o-rings for the magazine fill vales are also not present so filling can be a bit wasteful Besides the issues a smiley face fire rate and a crisp blow back. Accessories original box 2 x 50rd magazines b&t MP9 Suppressor lees precision Power down valve has been fitted making this site legal with green and red gas (winter months) more photos to come, chrono and ROF readings later today PayPal fees and postage included in price. Sent via parcel force 48. Tracking and updates will be provided - £145 No swaps/trades UKARA or other defence required Located in Malmesbury if collection preferred, happy to answer any question or provide additional photos/information

For sale is originally a boneyard purchase that was repaired. It’s not cosmetically beautiful at all and is an ex two tone with large amounts of paint still shown. The finish of the slide is scratched from what looks like sanding followed by some spray paint. it does however fire and work perfectly with strong blowback somehow ,after repairing the trigger bar. This is a fixed hop version and full plastic with some parts metal. The bearing of the safety has been swapped out for a small chunk of metal which also somehow works. listen in boneyard as it’s longevity is unknown and it’s not in the best state. Good for a wall hanger or take it out and have some fun with it comes with a 28rd magazine. no original box provided PayPal fees and postage included in price. Sent via parcel force 48. Tracking and updates will be provided - £30 UKARA or other defence required No swaps/trades Located in Malmesbury if collection preferred, happy to answer any question or provide additional photos/information

For sale is my near mint MP7, it has seen 100rds at a game and a few at home and sat in the box ever since. It is cosmetically pristine. I have so much love for this thing but unfortunately it’s gathering dust so about time it went to someone who would get more use out of it. As fun as this when held down on full auto it does have a tendency to slow itself down when it gets cold. I’ve seen this to be common on these. Semi however its perfect every time I’d recommend using .28/.30 or higher as it over hopped .25s. Amazing crisp blowback with aggressive recoil recommended for someone with experience owning and maintaining gas Rifs Accessories Original box, manuals 2 x 50rd magazines PayPal fees and postage included in price. Sent via parcel force 48 only no exception. Tracking and updates will be provided - £270 no offers UKARA or other defence required no trades/swaps Located in Malmesbury if collection preferred, happy to answer any question or provide additional photos/information

For sale is my Cyma high speed (blue) edition. Metal upper receiver, metal suppressor and charging handle, polymer Lower with retractable stock. 13/1 gears as standard and high speed motor General info This is an Ex two tone but the paint was removed rather than resprayed. Some remnants of the old paint can be seen at certain angles and internally but not noticeable unless you’re looking for it Whilst the body is solid and feels great the stock has a notice wobble on extension and the hand guard is not the most pleasant with a slight creak to it, pretty standard for a SD model.Less noticeable with a battery fitted. The Pins which secure the hand guard in place may fall out so ensure they are adequately secured in the o-rings. I have butchered a small amount of internal plastic to allow for a certain battery I had to fit. Does not affect performance or the way it looks externally. Photo provided of this Gearbox has had factory blue goop removed, cleaned and re-greased, everything remains as standard Accessories Original box (once I’ve dug it out) 3 mid cap 130rd 1 x high capand ZCI 6.02mm barrel fitted, original barrel can be included Rail mount for an optic 0.25g 294.8 289.4 287.4 287.4 291.1 293.7 287.0 PayPal fees and postage included in price Sent via parcel force 48 only no Exceptions Tracking and updates will be provided - £160 UKARA or Valid defence required No swaps/trades Located in Malmesbury if collection preferred, happy to answer any question or provide additional photos/information.

ASG Dan Wesson 357.magnum chrome finish For sale is my ASG Dan Wesson 357. Not sure why I brought this just one of those this looks cool moments but I have never taken this out properly since purchasing in July last year. Power down shells were pants clocking in at 250fps with a fresh co2 bulb, not sure if the hop was off during Chrono Chrome finish shows every finger mark possible. Unlike the chunky boi Dan Wesson’s I’ve owned before the grips are absolutely solid and feels firm in the hand with a rubberised texture, compared to the creaky weak plastic handles of my last one. I have not had the chance to test its capabilities of range or set the hop. Comes as a nice package with original box, manual. 24 low power shells, 12 x standard power, 2 x speed loaders. And a fitted holster of questionable quality. The Alan key for the hop unit was not in the box when I received it. PayPal fees and postage included in price. Sent via parcel force 48. Tracking and updates will be provided - £125 Located in Malmesbury if collection preferred, happy to answer any question or provide additional photos/information

Novritsch standard length SSG10/VSR barrel with end cap minor scuffs and marks. £20 posted including packaging and PayPal fees Novritsch short barrel SSG10/VSR. Small mark on thread brand new only taken out of packaging to photograph not included with an end cap. £30 including postage and PayPal fees - (SOLD) Located in Malmesbury if collection preferred, happy to answer any question or provide additional photos/information

Tokyo marui FNX-45 Tac, black 4 x magazines For sale is my TM tac-45 in black, owned for around a year and served me well, currently has a flamingo hop rubber fitted but It would benefit from a replacement at the next available opportunity. Fps 280-300 weather dependent on green with a .25. Cosmetically sound with only light markings from holstering and the normal wear on the inner barrel where it meets the slide. Recently cleaned and lubricated where necessary. Includes original box, (slight crushing of box upon delivery)manual, grip extenders, replacement feed guide and 4 x magazines. (Leak free) they are missing o-rings at the fill valve. PayPal fees and postage included in price. Sent via parcel force 48. Tracking and updates will be provided - £160 Located in Malmesbury if collection preferred, happy to answer any question or provide additional photos/information

Brought this with the intention of keeping some videos for my personal entertainment but ended up using this once, the quality of construction of these ain’t the greatest but they do a good job, I have found you need to play around with the settings to get it right, the app isn’t also the best but it does work. no damage to the lense, no major marks just some small cosmetic marks from use. the 40mm focal length is best for snipers or long range recording (30-70meters) comes with 3 genuine batteries and a usb for charging. I may have the box and manuals somewhere but cannot be found at this moment in time £70 posted via parcel force/Royal Mail and including fees Shipping may be delayed please message for any further info