Adenley
-
Posts
67 -
Joined
-
Last visited
-
Feedback
100%
2 Followers
Recent Profile Visitors
5,092 profile views
Adenley's Achievements
-
This advert is COMPLETED!
- For sale
- Used
An old and battered SWAT VTG 4 second blank firing grenade with 2 pins 209 primer adaptor and priming tool. mechanism tested and working at the time of listing. £35 including fees and PP fees£35
- GB
-
This advert is COMPLETED!
- For sale
- Used
(Re-listed and updated) part assembled was giving this a few years ago by a close friend and I have found it very difficult to find much about this, other than what I believe to be one of Tokyo Mario’s early AEGs. Trademarks and all that malarkey now I may be mislead but I believe this came out in 1993 .(it does have adjustable hop unit) I have searched as many forums as i can but cannot find the AEG version only the springer. A few YouTube videos about this but very little info This will need some work, service, shimming alignment all of that fun stuff. Everything to my best knowledge is here for the complete assembly. In a bag is the two body pins and mock bolt carrier, I actually have two screws left over… the cables also need to be fed through the front end to the battery connector. * This does also cycle, bit noisy but it works the motor has been swapped out to an ICS turbo 3000 as the original TM has metal inside the motor ( i think a loose screw made its way inside from my parts box) The gearbox has not been opened and is still factory Cosmetically there is has hairline splits in the upper receiver pin holes which sit in the body (very common), and small piece missing from the front sight post for pin, see photos . Body work is rather good for its age, it’s 90 percent polymer with only the stock tube and a barrel support in metal. This could be a great additions to someone’s collection. This is functional but it’s just a bit old and tired and needs some love. This might be a hard shift but I'm open to reasonable offers no mag included £90 including postage and fees£90
-
Airsoftnbe reacted to an advert:
WADSN V600 tac light dark earth, (Nuprol PEQ box - SOLD)
-
Appreciate the input, thank you kindly
-
Adenley reacted to a post in a topic:
Tokyo Marui Colt XM1772E2 “1997” AEG Retro
-
Adenley reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
I was giving this a few years ago by a close friend and I have found it very difficult to find much about this, other than what I believe to be one of Tokyo Mario’s early AEGs. Trademarks and all that malarkey now I may be confusing this with something else potentially replicating a colt “1993” model or if this was manufactured in 1993.(it does have adjustable hop unit) I have searched as many forums as i can but cannot find the AEG version only the springer This is currently dismantled as I hoped to refurbish the gearbox as typically it was sluggish and slow but have sold the rest of my collection unfortunately. And selling as is. Everything to my best knowledge is here for the complete assembly as I kept it all together. Cosmetically there is has hairline splits in the upper receiver pin holes which sit in the body, and small piece missing from the front sight post for pin, motor feels a bit gammy, see photos. But can be assembled fully . Body work is rather good for its age, it’s 90 percent polymer with only the stock tube and a barrel support in metal. what are we thinking chaps, information was limited from what I found online and could be desirable for a collector, but also discontinued and proprietary and requires knowledge to assemble, and from what i remember it was bad enough dismantling Ive exceeded my sales post so thought I would see what others think, im going chucked this on the boneyard for £100 all in P+PP which is around £15 - seem reasonable for rarity in my eyes but also could be a one way ticket to macks knowing my luck s
-
This advert is COMPLETED!
- For sale
- Used
For sale is a never fielded cosmetically as new body condition ASG CZ P09. This is the green gas version. Polymer Slide Reason for sale on boneyard is slide catch won’t lock on empty as the magazine has lost a small fragment of the lip that meets the catch bar. (This *should be rectified when using a new or other mag) magazine baseplate is missing also, this magazine does function and feed despite that. magazine is gas tight, gun cycles and fired. Chrono at 273fps on a .25. No original box included postage including fees sent parcelforce 48h £40 any question please reach out£40
- GB
-
This advert is COMPLETED!
- For sale
- Used
For sale is my PP19 Bizon, as to which brand this is I have no idea, it’s either silverback, S&T or Double eagle. it is the polymer version and does not have a rail mount on it either. Has a metal stock which is folding. Pretty solid surprisingly. I purchased this as a boneyard last year and was in a bit of a state. I rewired the damaged cable and fitted oversized conductors to deans, this was just for proof that it worked and cycled. Some parts were swapped out with used ones. The gun cycles and fires and feeds in semi and full. doing 251 on a .25. What this needs - Rewire strongly recommend as the wires are chunky and was tight getting back in, compression parts replaced, reshim and hop rubber replacement. . Loose selector also. comes with a mid cap and a 1000rd high cap. £100 - including postage and fees (parcel force 48h)£100
- GB
-
This advert is COMPLETED!
- For sale
- Used
ASG Rotex 130mm suppressor in dark earth, these do not come with foam inside. nurpol Bocca quick release suppressor unsure of exact lenght 180mm I think both of these clamp onto flash hiders and do not have threads £35 including postage and fees for both£35
-
This advert is COMPLETED!
- For sale
- Used
WADSN v600 tac light in dark earth will rail mount, pressure switch, button switch, not fielded, No battery included £22 including Postage and Fees Nurpol PEQ box, slight surface rust on screw, no battery. (SOLD) any question please ask£22
-
This advert is COMPLETED!
- For sale
- Used
Cyma MP5K low caps x 4 and mid cap x 1 £20 including postage and PP fees£20
-
This advert is COMPLETED!
- For sale
- Used
For sale is 4 x Cyma mid caps, 1 which is new. I am sure these are all Cyma but im not 100 percent potentially one could be g&g, I have no way of testing any questions please ask £20 posted all in including postage and PP fees£20
- GB
-
This advert is COMPLETED!
- For sale
- Used
WE MK20 SSR AEG Got hold of this a long time ago and it required some work as the hop unit was smashed and the sector gear had snapped a tooth. All gearbox parts were replaced with spares I had lying around (mainly Specna arms) and a new hop unit which took 6 months to arrive was fitted - This needs - the gearbox removing and the ambi selector lined up on the cogs as it’s slightly off selector functions as is but with some wobble due to alignment, new compression parts and or new spring, id replace the rubber personally as it has the one that came with the hop fitted, no idea how that performs. One thing to note this does not have the original flash hider or the front and rear sight. And two screws form the rear is missing but is secure with no wobble. ( Update The missing screws have been located for the rear and are now fitted) Stock pin is also missing FPS is at 230 on a .25, I just chucked a random spring in this when I put it together so either low compression or low power spring or both. A very quick job to sort but the reason i haven't sorted this is I've stopped playing after many years and i think its time to hang it all up now. Cycles and fires Fully functional, pretty much standard parts fitted so typical sluggish motor at 13rps. It’s been shimmed quite nicely and sound’s lovely. Perfect for a DMR build or just someone who likes the SSR. Also has a bolt hold open function A high capacity magazine is included but these are hard to find, standard m4 mags, believe it or not fit into this, it’s a disgusting sight. Standard version 2 gearbox inside. But external parts, hop unit are proprietary. comes with two new selector switches, ordered two by mistake and found the original in the end £110 including fees and postage by parcel force 48h (final price reduction) any other questions or photos please reach out£110
- GB
-
This advert is COMPLETED!
- For sale
- Used
For sale is a specna arms hybrid build which I just chucked random parts into to build. I can’t remember for the life of me what’s going on inside the gearbox as this was originally a negative Airsoft build that shit the bearings It had a perun hybrid fitted which is a bit poorly connected as the wires were damaged. I’d say regard the perun as screwed for when you disassemble. This does however function but requires attention, I have the original Gate mosfet for this which I planned to repair with but just didn’t get the time. it has an octane arms keymod with an integrated suppressor. The inner barrel however is probably not long enough and bbs may hit the suppressor. The recover also has casting errors so requires some force to get the pin in. Cycles and shoots. It’s slightly hot on a .25 at 330fps. A screw is missing from the bottom of the octane arms rail but is secure, the pin for the body does not have a screw but is secure. Motor height adjustment and shimming needed as this was just thrown together. it has everything required to work and also a bag of spares as well. But does require work included is Rifle T1 aim point (no battery) tan crane stock 6 mid caps barrel with flash hider keymod rails, no fixings keymod rail, cannot find the fixing stock tube spare specna arms metal receiver (has casting errors, also bolt catch won’t close as damaged) brand new hop unit fitted collection preferred from Malmesbury but can also post at an additional cost parcel for 48 any questions or photos required please feel free to reach out£100
-
This advert is COMPLETED!
- For sale
- Used
For sale is my Novritsch SSG10, which has done me well over the years but due to leaving the sport I am selling all my gear. It has the following parts fitted * flutted short barrel * suppressor * flutted bolt * maple leafs crazy jet 6.04mm * Tridos TDC * AA hop unit *flamingo VSR v2 * Rapax 2J spring * orange guide rings piston and spring guide remains as standard. included is original hop unit original bolt Original spring, I’m sure the other spring is for a different rifle… rapax fps adjusters nov ssg10 case tdc spares original lenght barrel AGM scope, whilst it is a lovely scope I would replace due to the dial coming loose when adjusted too high. 2 x Magazines FPS tested on .45 which is pretty much bang on the money for the limit at the high end. I did have to ever so slightly chop the spring when I fitted this as it was over the limit. If you dry fire this you can hear the twang from the loose spring but sounds perfect when shooting. There is a small piece of cable wrap over the spring guide which softens the noise when firing as well. I fitted the TDC and Hop unit last year but never got the chance to field this. the magazine has some plastic missing but feeds flawlessly, there should be two but i am trying to locate this so at the moment it’s just the 1. (updated 2nd mag found) the scope is included but its not the best, if you adjust the height to much the dial will come off the post so I would replace with your own. collection is preferred from Malmesbury but can post at an additional cost. happy to answer any question or provide additional photos.£290
- GB
-
This advert is COMPLETED!
- For sale
- Used
Regrettably for sale is my AUG with the rare HBAR steel front end with accurate Bipod and Flash hider. This was a work in progress which I needed to swap the motor cage over and just never got around to soldering the connections back on. I am no longer playing and don’t have the time or desire. Everything is here in order for it to be assembled, and an A2 front end with barrel but needs a new hop unit. * Tokyo Marui A1 body * HBAR front end with 655mm barrel (this is steel so will obtain surface rust) * A2 front end, missing hop unit parts but barrel also included * Spare gearbox casing shell, bearings have snuck away somewhere. * Spare external parts, flash hiders, body pins and stock plate rubbers, feed unit * 4 x High caps Being such a long barrel can make it difficult to achieve the power and range, I had this at 287 on a .25 just as standard Great project for someone who also has a desire for the HBAR aug, the price may seem a little high but only due to the rarity of the kit. May split in the future if there is no interest but for now, no splits or swaps Happy to answer any questions or provided additional photographs. Collection preferred (Malmesbury) but can post at additional cost parcel force 48.£200
Malmesbury
-
This advert is COMPLETED!
- For sale
- Used
This is a fixed 4x optic with back up sights and means of mounting a rail on top. Adjustable elevation, RL. Looked great on my Scar H No major marks or chips with amazing eye relief and a clean optic. Purchased a year ago from DCA comes with original box and sleeve sent via Royal Mail payment by goods and services only £80 Feel free to contact me for any further information or photos£80
