-
Posts
623 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Status Updates posted by SSPKali
-
TM MWS hop up clicker plunger got fired across the workshop earlier…..and I found it after only a few minutes searching! Bloody stupid design 😂
-
Anyone got tips for getting “silent fill o-rings” out of TM valves? Digging with a needle isn’t getting anywhere….
-
Tested ASG Beige gas against Abbey 144a in my MWS, probably about 18DegC.
ASG = 1.08J
Abbey = 0.86J.
(270fps vs 240fps on 0.32g)
Will keep a bottle on-hand for those warm summers days. ASG was reading 268 - 272fps yesterday at UCAP Gloucester when it was 20-22DegC so close to the limit. Nuprol white was 255 - 260ish.
-
You're costing me a fortune in gas dude! Seriously though, this is really useful. Hoping to get to the range next Saturday and will run through the three Vorsk gases I've got, and ASG orange and red. I'll use .32s as well as that's what I'll be running as standard.
In other news I've ordered a Titan nub from Jaeger so may fit that too if it gets here in time.
-
-
So if you have a TM MWS and you need to drop the FPS (maybe after a longer barrel or other changes that can tip it over the limit) try this one crazy trick!
Take out the plastic rocket valve and LIGHTLY rough up the flat back part, cover in thin layer of superglue and dip the end in baking powder. Dust off and repeat.
Clean up the edges to it moves freely in the nozzle and re-assemble.
Mine went from 290+ fps down to 240fps (0.32g) in 18DegC on ASG beige gas! Less than a mm of extra length makes all the difference! (Ooh err Matron!)
YMMV, messing about with internals like this might break things, get an adult to help, I am not liable for anything, ever. -
Finally finished faffing around with nozzles, valves, blockers and springs and the MWS. TM nozzles give 45fps LESS than the Guns Modify nozzles....DP aluminium valve adds 100fps over the GM plastic one...two identical valve springs vary by 15fps...
Steel bolt is shooting at 1.08J, spare nozzle gives 1.07J.
Spare Aluminium bolt has a NPAS in so can dial it up or down (and hopefully it won't self adjust!)- Show previous comments 2 more
-
Ah, interesting. I've always been happy with my stock MWS (apart from replacing the nub with a SixG) but my second one I'm happy having a bit of a play around with.
I'm fascinated by the stuff you've been doing so I'm really interested to see what else you're coming up with.
Incidentally, have you seen that BavTac are working on titanium bolt weights?
-
Mine came with a Crazyjet barrel (+20fps) and running 0.32g means you get Joule creep. In warm weather an NPAS or carefully selected nozzle parts are needed to keep it under 1.13J
I am surprised by the variance in output with things like rocket valves and nozzle brands. I would make a chart of them but given the seemingly random QA and materials in airsoft I am not sure it would be useful!
-
Been researching different gas pressures for my TM MWS. Usually using ASG Ultrair (beige bottle) and found this handy video comparing different gasses.
“Airsoft Mike” Youtube video shows the following (amongst others):
Nuprol 1.0 - 320fps
ASG Ultrair - 345fps
V6 - 365fps
V8 - 375fps
Nuprol 3.0 - 375fps
Obviously it will vary from platform to platform but a handy guide to, in the words of “Play Your Cards Right”, higher or lower? 😁
- Show previous comments 2 more
-
Just to chime in, I'm chuffed the graph on the side of the can is being recognised as helpful for working out whats best for you. Just a heads up though, while the Orange & Red are silicone free, the new green does have a small element to it, so for your MWS stick to ultrair for the warmer days.
I posted a bit of a spreadsheet in the MWS thread of my comparison of all 4 of our gasses through my MWS at 23c if you havent seen that. Theres also the price. Ultrair red is available for under a tenner.
-
PSA: Loctite 242 stress fractures TM plastic hand guards and makes then disintegrate
-
-
Brownells are taking their sweet time to deliver my Magpul MP5 fore end
- Show previous comments 7 more
-
Pure drop-ship operation and they do not care about airsofters; which isn't actually a ding on them imho. The issue is they're not clear about who they are when you go on the site, you're just expected to know, which people of course don't. But you'll not get 99% of the stuff they offer any other way, if you don't like long silent waits, don't go to them. Not a conventional business.
-
AngryGun are the Wish of the airsoft upgrades - change my mind!
-
AK2M4 - amazing service as usual! Answered my bone questions then got the order in the post same day
- Show previous comments 5 more
-
nice one man!!! im just waiting on my perun mosfets turning up then i can test out the compression kit that arrived hopefully bump my fps up a little as the cyma kit was absoloutly pants around 25% compression when the nozzle was installed had to ptfe tape the head to feck just to get a 100% seal without the nozzle lol
-
UCAP Vendetta tomorrow, running the MWS for the first time (and AKS74U backup!)