Cr0-Magnon

This hasn't been skirmished but as per the title, I built it to be the only Based on a brand new AAP-01, the build & package consists of: AAP-01 Base Gun - £90 Black Mamba Upper - £110 CowCow Ultra Lightweight BBU - £57 TTI Flat Trigger - £22 CTM Frame - £20 Flambeau Pistol Case £20 Total = £319 I'll be gutted to let this go but at the same time it spends 99% of the time in its case in a cupboard and that seems a crying shame. Stated price includes PayPal fees and postage. Please PM any questions as I don't receive notifications for anything asked on the listing.

**PRICE REDUCED AS ADDITIONAL MAG NO-LONGER INCLUDED** I always hesitant to say something is immaculate but I only received this last week brand new, I've cleaned it, taken the sticker off and test fired it in the garden. So it only has whatever minor wear occured during that. These really are excellent pistols. Based around the VFC platform I find them way better than WE's for gas efficiency and snappier too. Externally as you can see, it's got everything you'd normally go for when upgrading: Agency Arms lightened cut slide, fluted outer barrel, blackout fibre sights, beavertail, stippled frame, flared magwell, flat adjustable trigger and bumper on the mag. The icing on the cake is the black inner barrel, which may seem minor but really adds to the realism. Also included is an alternative back strap which changes the frame to a curved back, if that feels better in your hand. Stated priced includes PayPal fees and tracked postage. Please PM me any questions, as I don't get notifications for anything asked on the listing.

Where to start with this one...usually I struggle to get to ten photos, this time I had to really think about which made the final cut, because I could snap this all day. Long story short, this bundle comprises of: Tokyo Marui Glock 17 Gen4 - £150 Guarder FDE Frame (US Markings) - £43 Guarder Aluminium CNC Slide in FDE - £118 Guarder Steel Outer Barrel - £66 Guarder Steel CNC Recoil Rod & Spring - £35 Guarder Lightweight Nozzle Housing & Enhanced Nozzle Set - Circa £50 Guarder Enhanced Hop Unit Set - £19 Maple Leaf 97mm Inner Barrel - £26 Flamingo 50 Degree Hop Rubber - £9.50 Additional TM Mag - £27 Guarder Mag Base Plates (x2) - £24 Laylax Gas Routers (x2) - £16 Guarder (Nylon) Night Sight Set - £14.50 Total = £598.00 It's difficult to capture the true shades in the pics but the frame is definitely FDE rather than tan and the slide is a stunning burnt bronze. Not only does the Guarder slide look beautiful and feel very nice in the hand, but the gun is still smooth and snappy with it fitted. It hasn't been taken to a game day since I built a new upper for it, but I have used it for plinking. So while some marks visible from light use, especially on areas such as the outer barrels. There's no damage and everything or any parts which are worn out. Still doubting how good my stuff is? Check my feedback 🤷 Stated price includes PayPal fees and tracked courier. Please PM me any questions, as I don't get notifications for anything asked on the listing.

5 X lightly or possibly unused ASG Scorpion Evo 75 Round Mid Caps. All working as they should. 2 x translucent and 3 X black. Stated price includes PayPal fees and tracked courier. Please PM me any questions, as I don't get notifications for anything asked on the listing.

Another one I haven't skirmished or even owned for very long. So just that, selling because I no-longer play. I've listed "As New" because it hasn't been used in a game, just a few test shots in the garden to set the hop a bit. Let's be reasonable though, some minor marks always possible. As per the pictures I am including 1 x mid-cap and 2 x hi-cap flash mags. To get it spot-on, I've installed a high quality M100 spring and changed the hop rubber for a G&G green. So it lifts 0.28g's beautifully, at just the sort of FPS/joules you'd want. However if for whatever reason it's too powerful etc, this is equipped with a QC spring as well as the following features. Lancer Tactcial Engraved Metal Gearbox Shells 18:1 ratio steel gears (Gear piston specific to work with ETU Nebula Zion Arms) delay 8mm bearings 14 tooth steel piston Red anodized cylinder for improved surface finish 19000rpm Neodyn magnet motor QD steel spring guide on bearings Spring M90 Quick spring change (QD) Shielded low resistance wiring Hi-speed type metal trigger Electronic trigger block ETU Nebula Zion Arms with protection mosfet integrated into the electronic board 16AWG shielded wiring (rear) Internal parts: 6.03mm precision polished brass barrel Center wheel hop-up block (Gen 2) 50° hop-up joint External parts: High density polymer body One-piece metal outer barrel Folding Nylon fiber sight Ergonomic saddle M-LOK 10' thin handguard in polymer Single point steel strap attachment Stock with rubber butt plate Metal stock tube Steel dummy cylinder head Metal cocking lever with hi-speed handle Metal magazine catch Bolt catch (fictional) in metal Mid-cap metal magazine 120 rounds T-Dean battery connector I will also add that with the ETU and flat trigger, it's surprisingly snappy for a stock gun! Stated price includes PayPal fees and tracked courier. Please PM me any questions as I don't get notifications for anything added to the listing.

I haven't had this long, but I've decided I'm going to trim my collection down to a few Glocks and tinker with AAP's on the side. As you can see from the photos it's in excellent overall condition, but some marks possible. However I've tested it and everything works very well, all parts are tight and nothing is particularly worn etc. One of the snappiest 1911 variants available, as it's got TM's latest 15mm BBU as well as being made from better quality materials than their comparible Detonics. OK so the grips don't have the correct Hogue markings, but they do have a lovely rubberised feel! Stated price includes PayPal fees and tracked courier. Please PM me any questions, as I don't get notifications for anything asked on the listing.

Using these brought me a lot of joy.....sorry but I'm just not a mid-cap kinda guy. Some minor scuffing as pictured, but absolutely working as they should etc. They fit firmly into the gun and then just pull on the cord a handful of times and you'll be able to keep heads down from afar or just go on a mad dash. They're made from very high quality dupont polymer, with no creakiness to be had. **ONE MAG NOW SOLD** Stated price includes PayPal fees and tracked courier. Please PM me any questions, as I don't get notifications for anything asked on the listing.