Cr0-Magnon

This was built using a brand new AAP-01. I wanted something which maintained the light and practical original form, while adding significant upgrades. Build: AAP-01 - £90 5KU Ultra Lightweight Bolt (Red) - £33 Hadron Bouncer SS Kit - £13 AA CNC Steel Hammer - £35 CTM FUKU-2 Frame (Grey) - £12 CTM FUKU-2 Plastic Grips - £4 TTI Adjustable Trigger - £20 JEFE Steel Trigger Spring - £8 Total = £214 Stated price includes PayPal fees and trackable postage. Please PM me any questions, as I don't get notified of anything asked on the listing.

I purchased this brand new and before I'd even pulled the trigger once, sent it off to Luke at Negative Airsoft for him to turn into the best lightweight DMR it can be. Because I don't know about you but personally I think it makes more sense to have a gun you can actually shoulder repeatedly and carry around all-day. This has all of the reach but far less heft than some of its counterparts, such as the SR25. It's had helical gears, bushings, piston, piston head, nozzle and tappet plate spring, in order to optimise its performance. However, the most significant (and expensive) internal upgrades come in the way of the Perun AB++ MOSFET and Warhead Brushless motor. However to further increase the always sought after range and accuracy, I installed a ZCl inner barrel and Maple Leaf Macron+Omega combo. The Airtech Studios barrel stabiliser is the the icing on the cake in that regard. I tested it yesterday and set the hop so it was so it was starting to lift 0.36's at the end of my 30M garden (it definitely wanted to stretch it's legs way beyond). It was giving me a consistent 313/1.64J - which is perfect for my regular site. I've found you can affect this number by using a different weight of BB, so you need to apply more or less hop. For example it was giving me 1.88J when set for a 0.32. Alternatively you could just change the spring, as this does have a quick change spring. Albeit the type where you need to remove the gearbox first. It's only been skirmished about three times and then stored in a high quality rifle bag (not included). In fact it hasn't actually been skirmished since Luke last opened it up. So it's in excellent condition both internally and externally (although yes, some minor marks may still be present). It will come in its original box with an extra G2 90 round mag, which has the follower that activates the stop on empty feature. Honestly I haven't decided yet whether to include the V7 stock (which was nearly £60 by itself) or the original. Link to Negs video where he's doing the bulk of the work: (it's been back to him between then for further improvements and health check). Stated price includes PayPal fees and Parcelforce 48 courier. Please PM me any questions, as I don't get notified of anything asked on the listing.

As per the title, this is not a piece which has been bashed around an Airsoft site. Because of this it's in excellent all-round condition. Nit-picking you'd notice minor paint wear on the rear sight. Nothing else stands out as I look over it, but I've taken photos from a variety of angles in natural lighting, so the potential buyer can see for themselves. Please note, this was previously listed with real walnut grips included. That is no-longer the case, this will now come with its original plastic ones. The price has been lowered to reflect this. I believe these really are the pinnacle of Airsoft revolvers. My understanding is that the frame is made from metal and barrel from plastic but honestly, the finish is of such high quality, I couldn't even say for sure what's what when holding it. Holds 14 rounds, so definitely skirmishable if you're so inclined. In that environment it would definitely make up for anything it's lacking in range and accuracy, by the sheer awesomeness of getting kills with a revolver. Stated price includes PayPal fees and postage. Please PM any questions, as I don't get notifications for anything asked on the listing.

This was only briefly fitted, but never skirmished with it on. Unfortunately one of the rear sight Allen screws rounded, so there are some marks on and around the rear sight block, from where I had to remove this. However I tested it after and everything worked as it should. I've tried to capture overall condition accurately, by taking photos in natural light. This is a very high quality one piece CNC upgrade for the AAP-01. Not only does it look and feel great, but it gives you a top and bottom rail for lights and optics etc. Stated price includes PayPal fees and tracked courier. Please PM me any questions, as I don't get notifications for anything asked on the listing.

This hasn't been skirmished or had many rounds through it, but there are some scratches to the hop unit and damage to rear sight (pictured), from where I had to drill out a rounded allen head. Neither of the these can be seen when the gun is assembled or affect the overall operation of the gun. I've taken photos in natural sunlight to accurately capture any other marks present. Build: - Action Army AAP-01 in Black - GBP 80.00 - Action Army Black Mamba CNC Upper Receiver (Kit A) - GBP 110.00 - 5KU Ultra Lightweight Bolt in red - GBP 33.00 - Hadron Designs Bouncer Kit - GBP 13.00 (if you can find them in stock) - Action Army Steel Hammer - GBP 35.00 (This was an absolute pain, so I should be charging labour haha) - TTI Metal Adjustable Flat Trigger - GBP 23.00 - Stainless Steel Trigger Spring - GBP 8.00 - CTM FUKU-2 Lower in Grey - GBP 16.00 Total = GBP 318.00 (not including postage etc) Comes with 1 x mag as pictured. I've built several of these now, in different configurations, so know the platform very well. This particular build addresses all of the common AAP issues (weak hammer, long trigger pull and lack of rails), while maintaining the consistent feeding and shots you get from using the stock nozzle, bucking and inner barrel. This should make an excellent primary for CQB (or the enthusiastic woodland skirmisher!). This is the only gun I've been tempted to HPA tap! Providing you have the right setup, it's also not too big or heavy to holster. Stated price includes PayPal fees and tracked courier. Please PM me any questions, as I don't get notifications for anything asked on the listing.

I'm calling this a collectors piece as not only is it stunning and adorned with full Beretta Trademarks, but it's neither been skirmished nor had many rounds through it. It started life as a brand new Gen2 WE M92. Being a Gen2 this has better build quality, working decocker, adjustable hop (with "VSR style bucking) and full-auto capabilities. I then had the trademarks engraved and picked up a lovely set of Altamont "vintage" real wood grips. As per the photo, the original WE grips will come with this, a long with the WE box. Beauty aside, this would make a serviceable sidearm for skirmishing, if you're so inclined. Price includes PayPal fees and tracked postage. Please PM any questions, as I don't get notifications for anything asked on the listing.