HuttArmouries

Finally got round to finishing my g26 slide. Works beautifully

Looks good! Though I had to do a double take at first. That sling made me briefly think it had a thumbhole stock on it XD
 

thinking about getting a rail extension for my Scar so I printed a 3D version to see if I like the look.

So im a big fan of bulpups and for a while I was planning to build a hbar aug but that sort of fell by the wayside and then I ended up selling all my aegs barring a few lmgs and swapped to gbbrs. id still like a gbbr bulpup but as cool as the ghk aug or kwa f90 looks id rather keep using mags I already have as all of my current gbb guns are tokyo marui so I have mws and akm mags and parts spare. So I decided to make my own based on the vhs 2 . Found a reasonably accurate model online which im using as a basis but Im rebuilding it to actually be in the proper component parts as this one is all one solid piece. If all goes well I should be able to drop an mws trigger box and nozzle into it.  The bolt is the one part Im a little worried about. i intend to have it running on bearing rollers to remove the usual friction of 3d prints rubbing together but I may need to weight it a little or it will bash itself to death. 

So the original nozzle in pla+ lasted consistently for around 800 shots before the loading tab snapped. While im fine with swapping my nozzle out after a game day while im maintaining it I cant really sell it without some better longevity. Here is version 3. It has a seperate loading tab printed lengthways which increases the strength a lot. It is quite heavily reinforced now so it wont take the little faux bolt head the original had but Thats not a big loss. Now to test it  and see how long it lasts 

My wood and steel tm akm was looking lonely on the rack so I Grabbed a second hand one and dunked it in the zenitco knockoff bucket. Probably going to strip the last of the paint at some point but I cant be bothered right now

So im a big fan of bulpups and for a while I was planning to build a hbar aug but that sort of fell by the wayside and then I ended up selling all my aegs barring a few lmgs and swapped to gbbrs. id still like a gbbr bulpup but as cool as the ghk aug or kwa f90 looks id rather keep using mags I already have as all of my current gbb guns are tokyo marui so I have mws and akm mags and parts spare. So I decided to make my own based on the vhs 2 . Found a reasonably accurate model online which im using as a basis but Im rebuilding it to actually be in the proper component parts as this one is all one solid piece. If all goes well I should be able to drop an mws trigger box and nozzle into it.  The bolt is the one part Im a little worried about. i intend to have it running on bearing rollers to remove the usual friction of 3d prints rubbing together but I may need to weight it a little or it will bash itself to death. 

So im a big fan of bulpups and for a while I was planning to build a hbar aug but that sort of fell by the wayside and then I ended up selling all my aegs barring a few lmgs and swapped to gbbrs. id still like a gbbr bulpup but as cool as the ghk aug or kwa f90 looks id rather keep using mags I already have as all of my current gbb guns are tokyo marui so I have mws and akm mags and parts spare. So I decided to make my own based on the vhs 2 . Found a reasonably accurate model online which im using as a basis but Im rebuilding it to actually be in the proper component parts as this one is all one solid piece. If all goes well I should be able to drop an mws trigger box and nozzle into it.  The bolt is the one part Im a little worried about. i intend to have it running on bearing rollers to remove the usual friction of 3d prints rubbing together but I may need to weight it a little or it will bash itself to death. 

My wood and steel tm akm was looking lonely on the rack so I Grabbed a second hand one and dunked it in the zenitco knockoff bucket. Probably going to strip the last of the paint at some point but I cant be bothered right now

picked up this DE MWS for cheap second hand, the mag is absolutely trash, but the system is solid. Anyone have the original iron sights for sale?

So the original nozzle in pla+ lasted consistently for around 800 shots before the loading tab snapped. While im fine with swapping my nozzle out after a game day while im maintaining it I cant really sell it without some better longevity. Here is version 3. It has a seperate loading tab printed lengthways which increases the strength a lot. It is quite heavily reinforced now so it wont take the little faux bolt head the original had but Thats not a big loss. Now to test it  and see how long it lasts 

So the original nozzle in pla+ lasted consistently for around 800 shots before the loading tab snapped. While im fine with swapping my nozzle out after a game day while im maintaining it I cant really sell it without some better longevity. Here is version 3. It has a seperate loading tab printed lengthways which increases the strength a lot. It is quite heavily reinforced now so it wont take the little faux bolt head the original had but Thats not a big loss. Now to test it  and see how long it lasts 

So the original nozzle in pla+ lasted consistently for around 800 shots before the loading tab snapped. While im fine with swapping my nozzle out after a game day while im maintaining it I cant really sell it without some better longevity. Here is version 3. It has a seperate loading tab printed lengthways which increases the strength a lot. It is quite heavily reinforced now so it wont take the little faux bolt head the original had but Thats not a big loss. Now to test it  and see how long it lasts 

So recently I grabbed a tokyo marui type 89 and I had seen lots of videos of the nozzle mangling itself so I designed and 3d printed a copy of the tm part. It works just as well as the original and I can replace it indefinitely. This isn't the fist time I've done something like this and im even in the process of designing my own nozzles and fire control mechanisms from the ground up. 
 
So the question is if I offered a service of copying parts in rare guns and making spares or replacements would anyone be interested in that sort of thing? Obviously 3d printing has its limitations but theres no reason that when I have a printed part done the file cant be handed over to a cnc machining company or such particularly for trigger mechanism components. 

So the original nozzle in pla+ lasted consistently for around 800 shots before the loading tab snapped. While im fine with swapping my nozzle out after a game day while im maintaining it I cant really sell it without some better longevity. Here is version 3. It has a seperate loading tab printed lengthways which increases the strength a lot. It is quite heavily reinforced now so it wont take the little faux bolt head the original had but Thats not a big loss. Now to test it  and see how long it lasts 

My wood and steel tm akm was looking lonely on the rack so I Grabbed a second hand one and dunked it in the zenitco knockoff bucket. Probably going to strip the last of the paint at some point but I cant be bothered right now

My wood and steel tm akm was looking lonely on the rack so I Grabbed a second hand one and dunked it in the zenitco knockoff bucket. Probably going to strip the last of the paint at some point but I cant be bothered right now

My wood and steel tm akm was looking lonely on the rack so I Grabbed a second hand one and dunked it in the zenitco knockoff bucket. Probably going to strip the last of the paint at some point but I cant be bothered right now

My wood and steel tm akm was looking lonely on the rack so I Grabbed a second hand one and dunked it in the zenitco knockoff bucket. Probably going to strip the last of the paint at some point but I cant be bothered right now

My wood and steel tm akm was looking lonely on the rack so I Grabbed a second hand one and dunked it in the zenitco knockoff bucket. Probably going to strip the last of the paint at some point but I cant be bothered right now

Type 89 nozzle is done and with a few internal tweaks and some finer print settings its now giving me the same fps and consistency as the tm original piece. Going to be running it this weekend and just dumping mags through it every now and again to see how long it lasts. 

The type 89 gbbr scope mounts seem impossible to find and apparently the aeg ones arent combatible so I knocked this up quickly so I can have something on it for this weekend 

Type 89 nozzle is done and with a few internal tweaks and some finer print settings its now giving me the same fps and consistency as the tm original piece. Going to be running it this weekend and just dumping mags through it every now and again to see how long it lasts. 

The type 89 gbbr scope mounts seem impossible to find and apparently the aeg ones arent combatible so I knocked this up quickly so I can have something on it for this weekend 

The type 89 gbbr scope mounts seem impossible to find and apparently the aeg ones arent combatible so I knocked this up quickly so I can have something on it for this weekend