HuttArmouries

Yeah had a look. I can get the mosfet from the us for about the same price as just buying a cyma gearbox so im just gonna shove one of those in it.

Recently picked up ptw ar15 pdw very cheap as a boneyard. After some poking around inside it seems the mosfet is dead but the only replacements I can find are in the us. Im looking for a uk available alternative. not looking for the highest of the highest end. Just something that will get it working.

So I got this in a joblot and im not sure what to charge for it. Ive seen ones without the wraith stock listed for anything from £700 up to 1k. Comes with battery, tank, 4 epm 1 mags and an eotech clone. The o ring on the top of the tank is slightly damaged so it has a very small leak when screwed in but other than that its in full working condition and shoots beautifully. Also comes with an adaptor so you can use a line and the tank on your back.

Thanks very much!

Heyo. Just got a wolverine in a joblot of stuff and on testing it its shooting consistently around the 370fps mark. I have never worked on hpa guns before so I have no idea how to lower that. Its using a tank that screws into the rear rather than a hose. Just want to bring it down to around the 340 mark.

I did look at those but they dont have the metal nozzle

Got this usp in a job lot. Full h&k trades. No brand markings and a weird nozzle setup that reminds me of a kwa mac 11

I had some tanaka's available but my snubnose sold. I am actually in the process of remaking the tanaka magazine system for other revolvers and im gonna try to make my own short handled snub noses.

The g&g gearboxes will fit other m4s but those ics gearboxes are ics m4 specific and the l85 uses a proprietary gearbox

Made a new toggle for a luger I got out of a parts bin. This one is just for test fitting. Ill pretty it up later. Vaugely considering re doing the whole upper assembly to get some semblance of performance out of this we

Fair enough. I havent seen a new one in stock in the uk since they were first available

Because the zb26 is unavailable and very expensive when it is sold second hand.

Since im now reasonably competent at 3d modeling and printing I was planning to have a go at making a bren machine gun kit. Im finding plenty of blueprints but not many with measurements. If someone has a link to a more comprehensive set of measurements it would be appreciated. Also I have a couple of options with this and wanted to get some opinions. 1 do I make the pistol grip dimensionally accurate and shove an m14 or p90 gearbox in it 2 make the pistol grip a bit chunky and use as many standard v3 parts as possible. Either way im planning to make a 3d printable mag casing that can just have an ak midcap hidden inside and ill probably have to come up with my own hop unit. That is probably gonna be one of the more difficult things to get working.

worst I would say my browning hi power by we because it didnt function in the slightest but since I got rid of it Ill go with my Bo chiappa rhino. When I first got that revolver, cocked it and tried to pull the trigger It was so stiff I genuinely thought it was broken. It has worn in a little but it still has the worst trigger ive ever felt on anything barring a staple gun. However I didnt get the gun for practicality, I got it because it looks cool so im not as disappointed with it as I could be. However side by side with my tanaka revolvers its just disappointingly bad considering it wasnt cheap. worst honourable mention My lct rpk simply failed to function out of the box, it took work to get it going and even then the hop unit had to be entirely replaced. It shoots great now but I should not have had to do all that to make a £400 gun work in the first place. Best My a&k Pkm. Now I realise a lot of people have issues with these stripping pistons and such but I appear to have won the quality control lottery. Ive had this for 5 years and fired hundreds of thousands of rounds through it and the only things that broke were the box mag stripping a gear and the hop rubber wearing out. It shoots as far as it needs to with a reasonable rate of fire. Best value my Tokyo mauri m&p9l has been my go to sidearm for quite a while. Its snappy, the tm red dot works well and its very accurate.

Recently got into 3d modeling and grabbed a printer. Doing some modeling on making a serbu super shorty shotgun but based on a springer tri shot. Made a couple of prototype grips. The fixed one needs slimming down quite a lot but works just fine even at only 20% infil for these prototypes. I was also working on a folding one but Ill need to revisit it at some point because its just not strong enough. Also working on a hk21 machine gun based on one of my g3s

Found a match on evike. They seem to be generation 1 Ghk mags.

So I got 2 gbb ak mags in a joblot and ive never seen ones with a feed system like this. Googled gbb ak mag and nothing came up like this. Anyone know what they are?

Just got a tm recoil scar H for a good price second hand and immediately slapped an mrex rail on it

Gas blowback

Got this in an auction lot and as much as I love it I do need to make my money back. It looks in pristine condition with one exception. Part of the mags baseplate has snapped off. This dosent affect function and thre is a spare brand new boxed mag with it. I have fired a couple of test shots then very carefully put it away again and it all seems fully functional.

Picked up an auction lot of airsoft guns from what seems to have been a collector. Not a mark on any of them. All pristine condition and i am so damn excited for some of these.

Tm specifically dosent make their guns for export. Its one of the reasons they can put trade marks on their guns without licensing. In Japanese law if you are only making a product for sale in japan you can use other peoples logos and such no issue. If they started making them for export they wouldn't be able to use h&k trades and such. Thats as far as I understand it. Take that with a pinch of salt. I may be wrong. Third party companies buy from tm and export for them so if they started making higher fps versions that would mean they are making versions for export and would lose that protection.

This is subject to change. We are also importing stuff like ipsc style airsoft targets so we may be getting stuff direct from manufacturers soon

Unfortunately not to both of these. There seems to the quite the shortage of tm stuff in general

Can get the we mauser carbine for £200 or the armourer works han solo blaster for £300. Afraid those are the only Mauserish things available. can get those at £14 each As for augs unfortunately there are none with inbuilt scopes available. Only a2 and a3 variants.