HuttArmouries

Now fully functional. 8 full power shots from 1 co2 cartridge set at 450psi. Now its a matter of trimming the tube to make it more compact and bulding the launcher around it.

Got bored waiting for all the little bits of hardware for my grenade launcher to arrive so I made a basic sight arangement for it. This is more of a prototype. Ill make the final one from aluminium. with some sort of adjustment method. For now though Im just going to zero it for 50m and bolt it down.

Im probably gonna go for something vaugely eglm looking. And the tag shells dont actually seem to need resetting and even if they do I can just make the trigger have enough travel to do it. This sort of smooth plastic look with the metal underneath. Id like it to look nice but function is more important Also planning a standalone stock but this is probably gonna live on my ak102 most of the time

Im building my own launcher around this shell. It will be a permenant part of it and front load like a gp25. the line goes to an external thing with a chamber for co2 cartridges and a regulator.

So the co2 cartridge tag launchers cost £600+ and I really dont feel like paying that so this project has begun.

I briefly played around with gas blowback rifles but personally I didnt find them fun enough for me to put up with the maintenance needed. I have a couple of tm recoils I got cheap broken and while Ill admit they are definately not a replacement they are good enough for me. I still use gas pistols of course though.

Of course I shall provide but since im paying in installments it likely wont be for quite a while unless I sell something.

I seem to have committed to buying a real sword dragunov..... oh dear but also yay and its not as expensive as it could have otherwise been

Was commissioned for a holster for a rhino revolver and hasan sawn off shotgun. They specifically asked for simple stuff as these are going to be beaten up for post apocalyptic stuff. Shotgun is a real steel hammergun but its the closest thing I had for shaping it.

Been looking at doing a car 15 style build but I was never sure if id be able to find the fixed handle upper for a tm recoil. Which did you use? Im more familiar with the scar rifles so I wasnt sure how parts compatible the m4s are with regular aegs.

Raptor mp443 grach and some spare mags. seems I managed to pick it up at just the right time. taiwangun had them in stock for about 2 weeks and then they removed them from the site. no idea why but mine is currently stuck in poland due to brexit stuff.

Not sure how trustworthy the site is but at that price and through paypal I thought it was worth a go. https://www.onbuy.com/gb/m18-gel-ball-blaster-hand-grenade-water-beads-launcher-toy~c16140~p23886587/?lid=40746463

Its a lovely gun if a little weird to get the hang of. It feels like you should be gripping it higher than you actually do.

Tanaka m&p performance center r8. Got this from overseas and it seems to have seen very little use but damn is this a chunky revolver. Think this might be my new go to sidearm especially once its got an rmr knockoff on it.

couple of these reuseable spring grenades. they were £6. so I thought it was worth a go.

2 full sets of digiflora russian camo, 2 vdv plate carriers and various pouches and bits. Me and a friend are going full russian.

So a while ago I had a tm ngrs ak and ended up deciding it was fun but not worth what I paid for it. So I sold it and deciced to only buy ngrs rifles broken and in need of work. Here is what I have got my hands on so far, both for significantly less than I would have otherwise paid for them. Keeping my eyes out for an ak now.

A bit of a ressurection project here. I bought this star m14 ebr about 3 years ago because it is a lovely chunk of c&c aluminium. It uses a proprietary gearbox and though I managed to get a new shell I soon realised that I couldent get the switch. So it sat and gathered dust for a long time. Recently I picked up a cyma m14 gearbox and a dremel and set to work. Unfortunately since the m14 gearbox has a sideways motor the current stock wont fit. Ill be making a layered plywood target shooting style stock instead. It will also be a good test run for the sks project I have planned in future. still working out how best to attach it as the bracket currently stops the motor from seating fully. Im happy to be finally making progress on this gun and It should be done soon. The main gearbox shell fits very tightly but ive found I had to remove the selector mech to get it to work so this is now a semi auto only gun. Parts I still need to source: some sort of bracket to bolt the stock to new charging handle as the old one shattered lots of little bolts

Its a smith and wesson performance center. Its basically a 44 magnum frame with a 357 cylinder. Means the real ones hold 8 shots.

Oops..... My finger slipped.... Another tanaka is in the post.... one of these to be specific.

I meant ngrs rifles in general but I get what you mean. I dont own a single m4.

The buffer tube removal is complete. now it just needs a bit of cleaning up and some paint.

They are lovely but I find it hard to justify the price for what you get. Thats why both the ones I have came to me broken XD

Tm recoil 417. Needs a rewire so I swapped it for a couple of other guns.

I prefer the original stock. And maybe the scar 20 stock