Enid_Puceflange

Yeah I noticed that crescent shaped cut out and it is facing down towards the magazine 👍 Id best put up a “wanted” ad for fairy dust then 😂👍

Nope! 😂 I never did any of the aforementioned inner barrel tests, so more stuff to look at next time it’s apart. 👍 It does have a stainless barrel, and unless it’s different to the Scar L , I believe they come standard with a brass barrel installed? The inner certainly went back into the outer without any fuss or hints anything was bent. I dunno about anyone being inside the gearbox previously I’ll see if I can get any clues without letting the fairies out of their captivity 👍

I had one and fielded it for over a year before I got bored (it happens easily with me 😂) It is mostly plastic / abs and nice and light weight The only thing I did to mine when it arrived was downgrade the spring as it was close to 400fps on arrival & wire to deans Mid caps are hard to find, hi caps are metal and cheap 👍 I must be pretty light handed with my stuff, as I never managed to break anything on it. The stock mounted rear sling point obviously isn’t up to the job it’s supposed to do. But, as a lightweight DMR , I recon it’s perfect. A lot less creaky than the TM version! Pop a claw mount on the top, fit an optic, lock to semi and yer off! I loved mine! Yes, I never did remove the “HopUp” dangler on the front It made other players diss me thinking I was a noob 😉

I’ve heard mixed things about the site Despite them seeming to enjoy the whole WWII style of “re enactment “ one of our regular players was handed a ban from the site for wearing German WWII nazi collar insignia on his jacket Now while this is questionable, and separate discussions have been had on this topic. I feel this is a bit stupid, seeing as they have a load of their regular players badges and ranked up to the max! I’ve avoided the place like the plague Apparently, one of the site operators likes to wear Lederhosen in her free time! go figure 🤷🏼‍♂️

Well, I replaced the old bucking with the fresh new one Totally dismantled the hop unit to remove any contamination etc and re assembled The fresh rubber was an exceptionally tight fit, over the barrel and getting back into the hop unit. My first testing of it was in the back garden (before the cold snap we just had) So I would say it was roughly 8 deg outside - keeping in mind the rif had been stored in the house at circa 20deg just before testing fps was good - still around 290 And it was lifting .20’s like a champ My next outing to test it was on site, the day never got above freezing Range was poor, maybe 30m and that was firing .28’s which is what I intend to use Accuracy was ABYSMAL I didn’t have .25’s with me to try slightly lighter Im hoping that the freezing temperature was the reason for a lacklustre performance , causing the hop to remain quite hard and not give much Magnus effect? 🤷🏻‍♂️

Question: would a very low outdoor temperature affect the performance of a hop rubber? (like 0 to -1 degree outside ) On an aeg I add 🤔

If anyone has done anything to one of these, I’d hazard a guess it’d be Catgutviolin check out his channel on YT (also he does explosive enterprises channel on YT) He also frequents the gbbr group on discord 👍

Oh dear This makes my Pee-Pee tingle 😎 0

How’s about the Goon on Discord that expect his Dynatex Grenade is worth £150 😂

Pics? most folk will say 70% of cheapest current retail Try that as a guide 👍

It’ll be coming apart- AGAIN 🤦🏻‍♂️

Yeah, It’s an ngrs They have a pretty weak recoil, more like a mild vibration when shooting 😂 But certainly more soul than a standard aeg (nothing like TM’s other M4 versions) Still work to do on the hop unit A 30% chance of hitting a target at 30m just now which is USELESS this is after a fresh hop rubber I put circa 700 rounds through it yesterday hoping it would bed in Funny thing is, it seems more consistent on full auto 🤷🏻‍♂️

A properly frosty game on site today Still, not satisfied with my hop & accuracy But being able to hit something is only really 20% of what matters when you love the way it looks 😂

It’s ALIVVVVE https://youtu.be/t_8R9gjOqFc

If it’s polymer, I’d be tempted to try the dots on it A small drill 3mm or so and a small “dimple” made with a dremmel etc Then fill the dimples with a red enamel paint from humbrol or tamiya You only need to go .5 - 1mm deep

If the screws are stripped, yes If it’s the holes threaded on the gearbox/receiver, not as

The Desert DPM works exceptionally well with the fallen foliage at this time of year looks cool

This seasons winter pew Now all I need to do is try and get a game in 🤦‍♂️

Bloody Hell That arrived quick!! Not due for another 3 weeks at least!! Feels lovely, great colour finish Will get a pic of it mounted later before Mrs P wants it wrapped under the tree 😫

Yeah, I suppose that’s a possibility. The Chrono reading is what I would expect for a non tampered with TM anyway, so I’m comfy that it’s pretty healthy overall. It was chucking .28’s down range last week no bother, just no good accuracy at long range. Hopefully the fresh rubber will see to that Fps wise, I’m not going to tamper with it any more Im a firm believer in the TM fairy’s 🧚

Yes, I made sure the bucking was as far forward as the original was to ensure it was getting a good seal with the nozzle Maybe - hopefully, the nozzle and bucking just need to “bed in” together 🤷🏻‍♂️

Not tested it on my ideal for it which will be .28’s

Update: Took it apart again earlier, discovered that in my laziness at disassembly, I had merely loosened the six screws at the hop end of the external barrel, to allow me to free the internal & hop unit What I hadn’t realised is there is a tab on the side of the hop unit that slots inside the external barrel. So the hop unit was sitting maybe 1cm further back than it should have been. Therefore , it couldn’t feed as the nozzle was protruding into the hop assembly too far and stopping beebs from feeding Doesn’t explain how the fcuk I managed to get 3/4 shots through it before it stopped feeding previously 🤷🏻‍♂️ Anyway, now shooting .2’s at mid 280’s fps (was previously just below 300 with standard worn rubber) Will fps climb a touch as the rubber beds in? 🤞 this was read with minimum hop applied

Yup The walls are covered in RIF’s, all done in manufacturers groups decent selection I was blown away when I went in And you are right about LW I think they are aiming at just being an online retailer

Aye, But you ain’t the next owner 😂